lkml.org 
[lkml]   [2020]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/2] phy: intel: Add Keem Bay eMMC PHY support
Date
Hi.

The first part is to document DT bindings for Keem Bay eMMC PHY.

The second is the driver file, loosely based on phy-rockchip-emmc.c
and phy-intel-emmc.c. The latter is not being reused as there are
quite a number of differences i.e. registers offset, supported clock
rates, bitfield to set.

The patch was tested with Keem Bay evaluation module board.

Thank you.

Best regards,
Zainie

Changes since v3:
- Exit keembay_emmc_phy_power() with return ret;.
- In keembay_emmc_phy_init(), use PTR_ERR_OR_ZERO(...).
- In keembay_emmc_phy_probe(), devm_regmap_init_mmio(...) in single line.

Changes since v2:
- Modify DT example to use single cell for address and size.

Changes since v1:
- Rework phy-keembay-emmc.c to make it similar to phy-intel-emmc.c.
- Use regmap_mmio, and remove reference to intel,syscon.
- Use node name phy@....
- Update license i.e. use dual license.


Wan Ahmad Zainie (2):
dt-bindings: phy: intel: Add Keem Bay eMMC PHY bindings
phy: intel: Add Keem Bay eMMC PHY support

.../bindings/phy/intel,keembay-emmc-phy.yaml | 45 +++
drivers/phy/intel/Kconfig | 8 +
drivers/phy/intel/Makefile | 1 +
drivers/phy/intel/phy-keembay-emmc.c | 316 ++++++++++++++++++
4 files changed, 370 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,keembay-emmc-phy.yaml
create mode 100644 drivers/phy/intel/phy-keembay-emmc.c

--
2.17.1

\
 
 \ /
  Last update: 2020-06-12 05:56    [W:0.543 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site