lkml.org 
[lkml]   [2020]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[RFC PATCH v3 0/2] net: dsa: qca8k: Improve SGMII interface handling
Ok, take 3. This splits out the PHYLINK change to a separate patch which
should have no effect on functionality, and then adds the SGMII clean-ups
(i.e. the missing initialisation) on top of that as a second patch.

As before, tested with a device where the CPU connection is RGMII (i.e.
the common current use case) + one where the CPU connection is SGMII. I
don't have any devices where the SGMII interface is brought out to
something other than the CPU.


v3:
- Move phylink changes to separate patch
- Address rmk review comments
v2:
- Switch to phylink
- Avoid need for device tree configuration options

Jonathan McDowell (2):
net: dsa: qca8k: Switch to PHYLINK instead of PHYLIB
net: dsa: qca8k: Improve SGMII interface handling

drivers/net/dsa/qca8k.c | 337 ++++++++++++++++++++++++++++------------
drivers/net/dsa/qca8k.h | 13 ++
2 files changed, 252 insertions(+), 98 deletions(-)

--
2.20.1

\
 
 \ /
  Last update: 2020-06-10 21:14    [W:0.148 / U:2.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site