lkml.org 
[lkml]   [2020]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] dt-bindings: rtc: add microchip,sam9x60-rtt
Date
Add microchip,sam9x60-rtt to compatible list.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
index 6ae79d1843f3..3f0e2a5950eb 100644
--- a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
@@ -1,7 +1,9 @@
Atmel AT91SAM9260 Real Time Timer

Required properties:
-- compatible: should be: "atmel,at91sam9260-rtt"
+- compatible: should be one of the following:
+ - "atmel,at91sam9260-rtt"
+ - "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"
- reg: should encode the memory region of the RTT controller
- interrupts: rtt alarm/event interrupt
- clocks: should contain the 32 KHz slow clk that will drive the RTT block.
--
2.7.4
\
 
 \ /
  Last update: 2020-06-10 11:07    [W:0.679 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site