lkml.org 
[lkml]   [2020]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] PCI: Remove End-End TLP as PASID dependency
On Wed, Jun 10, 2020 at 12:18:14PM +0800, Zhangfei Gao wrote:
> Some platform devices appear as PCI and have PCI cfg space,
> but are actually on the AMBA bus.
> They can support PASID via smmu stall feature, but does not
> support tlp since they are not real pci devices.
> So remove tlp as a PASID dependency.
>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> ---
> drivers/pci/ats.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
> index 390e92f..8e31278 100644
> --- a/drivers/pci/ats.c
> +++ b/drivers/pci/ats.c
> @@ -344,9 +344,6 @@ int pci_enable_pasid(struct pci_dev *pdev, int features)
> if (WARN_ON(pdev->pasid_enabled))
> return -EBUSY;
>
> - if (!pdev->eetlp_prefix_path)
> - return -EINVAL;
> -

This check is useful, and follows the PCI specification (4.0r1.0
2.2.10.2 End-End TLP Prefix Processing: "Software should ensure that TLPs
containing End-End TLP Prefixes are not sent to components that do not
support them.")

Why not set the eetlp_prefix_path bit from a PCI quirk? Unlike the stall
problem from the other thread, this one looks like a simple design mistake
that can be fixed easily in future iterations of the platform: just set
the "End-End TLP Prefix Supported" bit in the Device Capability 2 Register
of all bridges.

Thanks,
Jean

\
 
 \ /
  Last update: 2020-06-10 09:47    [W:0.085 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site