lkml.org 
[lkml]   [2020]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] dt-bindings: display: Document Cadence MHDP HDMI/DP bindings
Date
From: Sandor Yu <Sandor.yu@nxp.com>

Document the bindings used for the Cadence MHDP HDMI/DP bridge.

Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
---
.../bindings/display/bridge/cdns,mhdp.yaml | 46 +++++++++++++++
.../devicetree/bindings/display/imx/mhdp.yaml | 59 +++++++++++++++++++
2 files changed, 105 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
create mode 100644 Documentation/devicetree/bindings/display/imx/mhdp.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
new file mode 100644
index 000000000000..aa23feba744a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause))
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MHDP TX Encoder
+
+maintainers:
+ - Sandor Yu <Sandoryu@nxp.com>
+
+description: |
+ Cadence MHDP Controller supports one or more of the protocols,
+ such as HDMI and DisplayPort.
+ Each protocol requires a different FW binaries.
+
+ This document defines device tree properties for the Cadence MHDP Encoder
+ (CDNS MHDP TX). It doesn't constitue a device tree binding
+ specification by itself but is meant to be referenced by platform-specific
+ device tree bindings.
+
+ When referenced from platform device tree bindings the properties defined in
+ this document are defined as follows. The platform device tree bindings are
+ responsible for defining whether each property is required or optional.
+
+properties:
+ reg:
+ maxItems: 1
+ description: Memory mapped base address and length of the MHDP TX registers.
+
+ interrupts:
+ maxItems: 2
+
+ interrupt-names:
+ - const: plug_in
+ description: Hotplug detect interrupter for cable plugin event.
+ - const: plug_out
+ description: Hotplug detect interrupter for cable plugout event.
+
+ port:
+ type: object
+ description: |
+ The connectivity of the MHDP TX with the rest of the system is
+ expressed in using ports as specified in the device graph bindings defined
+ in Documentation/devicetree/bindings/graph.txt. The numbering of the ports
+ is platform-specific.
diff --git a/Documentation/devicetree/bindings/display/imx/mhdp.yaml b/Documentation/devicetree/bindings/display/imx/mhdp.yaml
new file mode 100644
index 000000000000..17850cfd1cb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/mhdp.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/mhdp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MHDP Encoder
+
+maintainers:
+ - Sandor Yu <Sandoryu@nxp.com>
+
+description: |
+ The MHDP transmitter is a Cadence HD Display TX controller IP
+ with a companion PHY IP.
+ The MHDP supports one or more of the protocols,
+ such as HDMI(1.4 & 2.0), DisplayPort(1.2).
+ switching between the two modes (HDMI and DisplayPort)
+ requires reloading the appropriate FW
+
+ These DT bindings follow the Cadence MHDP TX bindings defined in
+ Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml with the
+ following device-specific properties.
+
+Properties:
+ compatible:
+ enum:
+ - nxp,imx8mq-cdns-hdmi
+ - nxp,imx8mq-cdns-dp
+
+ reg: See cdns,mhdp.yaml.
+
+ interrupts: See cdns,mhdp.yaml.
+
+ interrupt-names: See cdns,mhdp.yaml.
+
+ ports: See cdns,mhdp.yaml.
+
+Required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - ports
+
+Example:
+ - |
+ mhdp: mhdp@32c00000 {
+ compatible = "nxp,imx8mq-cdns-hdmi";
+ reg = <0x32c00000 0x100000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "plug_in", "plug_out";
+
+ ports {
+ mhdp_in: endpoint {
+ remote-endpoint = <&dcss_out>;
+ };
+ };
+ };
--
2.17.1
\
 
 \ /
  Last update: 2020-06-01 08:24    [W:0.109 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site