lkml.org 
[lkml]   [2020]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 in nilfs_segctor_do_co
> Wondering if it can be reproduced on mainline with c3aab9a0bd91
> ("mm/filemap.c: dont initiate writeback if mapping has no dirty pages")
> reverted?

For mainline kernels with that commit reverted, this oops actually
doesn't occur.

Regards,
Ryusuke Konishi

On Mon, Jun 1, 2020 at 11:40 AM Hillf Danton <hdanton@sina.com> wrote:
> On Mon, 01 Jun 2020 02:49:54 Ryusuke Konishi wrote:
> > Hi,
> >
> > This bug turned out to be caused by set_page_writeback() call for
> > segment summary buffers and super root buffers at
> > nilfs_segctor_prepare_write().
> >
> > set_page_writeback() can call inc_wb_stat(inode_to_wb(inode),
> > WB_WRIEBACK) where inode_to_wb(inode) is NULL if inode_attach_wb() is
> > not called in advance. To ensure inode_attach_wb() is called,
> > mark_buffer_dirty() should be called for those buffers.
> >
> > The following patch fixes this issue,
>
> Thanks for sharing your analysis and patch.
>
> Wondering if it can be reproduced on mainline with c3aab9a0bd91
> ("mm/filemap.c: dont initiate writeback if mapping has no dirty pages")
> reverted? If no then we need to update the stable trees.
>
> Hillf
>
> > but I got another oops at
> > nilfs_segctor_complete_write() during a stress test. So, I'm still
> > investigating.
> >
> > Regards,
> > Ryusuke Konishi
> >
> > ===
> > diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
> > index 445eef4..f6b5ca8 100644
> > --- a/fs/nilfs2/segment.c
> > +++ b/fs/nilfs2/segment.c
> > @@ -1650,6 +1650,8 @@ static void nilfs_segctor_prepare_write(struct nilfs_sc_info *sci)
> >
> > list_for_each_entry(bh, &segbuf->sb_segsum_buffers,
> > b_assoc_buffers) {
> > + set_buffer_uptodate(bh);
> > + mark_buffer_dirty(bh);
> > if (bh->b_page != bd_page) {
> > if (bd_page) {
> > lock_page(bd_page);
> > @@ -1665,6 +1667,8 @@ static void nilfs_segctor_prepare_write(struct nilfs_sc_info *sci)
> > b_assoc_buffers) {
> > set_buffer_async_write(bh);
> > if (bh == segbuf->sb_super_root) {
> > + set_buffer_uptodate(bh);
> > + mark_buffer_dirty(bh);
> > if (bh->b_page != bd_page) {
> > lock_page(bd_page);
> > clear_page_dirty_for_io(bd_page);
> > ===
> >
> >
> > On Thu, 30 Apr 2020 08:27:47 -0700, Tom <tommytoad0@gmail.com> wrote:
> > > Thank you! This is very helpful information, and does seem to be a
> > > workaround.
> > >
> > > Like you, I have my home directory on a separate NILFS2 filesystem. As
> > > a temporary solution, I removed the line from /etc/fstab for that
> > > filesystem and added your dd suggestion along with a manual mount of
> > > the home filesystem to /etc/rc.local. /home is now mounted properly
> > > at boot with any of the newer kernels I tried.
> > >
> > > Thanks,
> > > Tom
> > >
> > > On 4/30/20 5:38 AM, Hideki EIRAKU wrote:
> > >>> In Msg <874kuapb2s.fsf@logand.com>;
> > >>> Subject "Re: BUG: unable to handle kernel NULL pointer dereference at
> > >>> 00000000000000a8 in nilfs_segctor_do_construct":
> > >>>
> > >>>> Tomas Hlavaty <tom@logand.com> writes:
> > >>>>>>> 2) Can you mount the corrupted(?) partition from a recent version of
> > >>>>>>> kernel ?
> > >>>>
> > >>>> I tried the following Linux kernel versions:
> > >>>>
> > >>>> - v4.19
> > >>>> - v5.4
> > >>>> - v5.5.11
> > >>>>
> > >>>> and still get the crash
> > >> I found conditions to reproduce this issue with Linux 5.7-rc3:
> > >> - CONFIG_MEMCG=y *and* CONFIG_BLK_CGROUP=y
> > >> - When the NILFS2 file system writes to a device, the device file has
> > >> never written by other programs since boot
> > >> The following is an example with CONFIG_MEMCG=y and
> > >> CONFIG_BLK_CGROUP=y kernel. If you do mkfs and mount it, it works
> > >> because the mkfs command has written data to the device file before
> > >> mounting:
> > >> # mkfs -t nilfs2 /dev/sda1
> > >> mkfs.nilfs2 (nilfs-utils 2.2.7)
> > >> Start writing file system initial data to the device
> > >> Blocksize:4096 Device:/dev/sda1 Device Size:267386880
> > >> File system initialization succeeded !!
> > >> # mount /dev/sda1 /mnt
> > >> # touch /mnt
> > >> # sync
> > >> #
> > >> Loopback mount seems to be the same - if you do losetup, mkfs and
> > >> mount on a loopback device, it works:
> > >> # losetup /dev/loop0 foo
> > >> # mkfs -t nilfs2 /dev/loop0
> > >> mkfs.nilfs2 (nilfs-utils 2.2.7)
> > >> Start writing file system initial data to the device
> > >> Blocksize:4096 Device:/dev/loop0 Device Size:267386880
> > >> File system initialization succeeded !!
> > >> # mount /dev/sda1 /mnt
> > >> # touch /mnt
> > >> # sync
> > >> #
> > >> But if you do mkfs on a file and use mount -o loop, it may fail,
> > >> depending on whether the loopback device assigned by the mount command
> > >> was used or not before mounting:
> > >> # /sbin/mkfs.nilfs2 ./foo
> > >> mkfs.nilfs2 (nilfs-utils 2.2.7)
> > >> Start writing file system initial data to the device
> > >> Blocksize:4096 Device:./foo Device Size:268435456
> > >> File system initialization succeeded !!
> > >> # mount -o loop ./foo /mnt
> > >> [ 36.371331] NILFS (loop0): segctord starting. Construction interval =
> > >> 5 seconds, CP frequency < 30 seconds
> > >> # touch /mnt
> > >> # sync
> > >> [ 40.252869] BUG: kernel NULL pointer dereference, address:
> > >> 00000000000000a8
> > >> (snip)
> > >> After reboot, it fails:
> > >> # mount /dev/sda1 /mnt
> > >> [ 14.021188] NILFS (sda1): segctord starting. Construction interval =
> > >> 5 seconds, CP frequency < 30 seconds
> > >> # touch /mnt
> > >> # sync
> > >> [ 20.576309] BUG: kernel NULL pointer dereference, address:
> > >> 00000000000000a8
> > >> (snip)
> > >> But if you do dummy write to the device file before mounting, it
> > >> works:
> > >> # dd if=/dev/sda1 of=/dev/sda1 count=1
> > >> 1+0 records in
> > >> 1+0 records out
> > >> 512 bytes copied, 0.0135982 s, 37.7 kB/s
> > >> # mount /dev/sda1 /mnt
> > >> [ 52.604560] NILFS (sda1): mounting unchecked fs
> > >> [ 52.613335] NILFS (sda1): recovery complete
> > >> [ 52.613877] NILFS (sda1): segctord starting. Construction interval =
> > >> 5 seconds, CP frequency < 30 seconds
> > >> # touch /mnt
> > >> # sync
> > >> #
> > >> # losetup /dev/loop0 foo
> > >> # dd if=/dev/loop0 of=/dev/loop0 count=1
> > >> 1+0 records in
> > >> 1+0 records out
> > >> 512 bytes copied, 0.0243797 s, 21.0 kB/s
> > >> # mount /dev/loop0 /mnt
> > >> [ 271.915595] NILFS (loop0): mounting unchecked fs
> > >> [ 272.049603] NILFS (loop0): recovery complete
> > >> [ 272.049724] NILFS (loop0): segctord starting. Construction interval
> > >> = 5 seconds, CP frequency < 30 seconds
> > >> # touch /mnt
> > >> # sync
> > >> #
> > >> I think the dummy write is a simple workaround for now, unless
> > >> mounting NILFS2 at boot time. But I have been using NILFS2 /home for
> > >> years, I would like to know better workarounds.
> > >>
> >
>

\
 
 \ /
  Last update: 2020-06-01 13:47    [W:0.090 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site