lkml.org 
[lkml]   [2020]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] nvmem: add ONIE NVMEM cells support
Hi,

On Mon, Jun 01, 2020 at 09:50:52AM +0100, Srinivas Kandagatla wrote:
>
>
> On 30/05/2020 00:04, Vadym Kochan wrote:
> > ONIE is a small operating system, pre-installed on bare metal network
> > switches, that provides an environment for automated provisioning.
> >
> > This system requires that NVMEM (EEPROM) device holds various system
> > information (mac address, platform name, etc) in a special TLV layout.
> >
> > The driver registers ONIE TLV attributes as NVMEM cells which can be
> > accessed by other platform driver. Also it allows to use
> > of_get_mac_address() to retrieve mac address for the netdev.
> >
> > Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
> > ---
> > drivers/nvmem/Kconfig | 9 +
> > drivers/nvmem/Makefile | 3 +
> > drivers/nvmem/onie-cells.c | 332 +++++++++++++++++++++++++++++++++++++
>
> Is there a reason why Device tree bindings are missing for this driver?
>
Sorry, I will do this, but I am not sure if even this driver is
conceptually acceptable.

>
>
> > 3 files changed, 344 insertions(+)
> > create mode 100644 drivers/nvmem/onie-cells.c
> >
> > diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> > index d7b7f6d688e7..dd9298487992 100644
> > --- a/drivers/nvmem/Kconfig
> > +++ b/drivers/nvmem/Kconfig
> > @@ -273,4 +273,13 @@ config SPRD_EFUSE
> > This driver can also be built as a module. If so, the module
> > will be called nvmem-sprd-efuse.
> > +config NVMEM_ONIE_CELLS
> > + tristate "ONIE TLV cells support"
> > + help
> > + This is a driver to provide cells from ONIE TLV structure stored
> > + on NVME device.
> > +
> > + This driver can also be built as a module. If so, the module
> > + will be called nvmem-onie-cells.
> > +
> > endif
> > diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
> > index a7c377218341..2199784a489f 100644
> > --- a/drivers/nvmem/Makefile
> > +++ b/drivers/nvmem/Makefile
> > @@ -55,3 +55,6 @@ obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o
> > nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o
> > obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o
> > nvmem_sprd_efuse-y := sprd-efuse.o
> > +
> > +obj-$(CONFIG_NVMEM_ONIE_CELLS) += nvmem-onie-cells.o
> > +nvmem-onie-cells-y := onie-cells.o
> > diff --git a/drivers/nvmem/onie-cells.c b/drivers/nvmem/onie-cells.c
> > new file mode 100644
> > index 000000000000..1e8b4b8d1c0d
> > --- /dev/null
> > +++ b/drivers/nvmem/onie-cells.c
> > @@ -0,0 +1,332 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * ONIE NVMEM cells provider
> > + *
> > + * Author: Vadym Kochan <vadym.kochan@plvision.eu>
> > + */
> > +
> > +#define ONIE_NVMEM_DRVNAME "onie-nvmem-cells"
> > +
> > +#define pr_fmt(fmt) ONIE_NVMEM_DRVNAME ": " fmt
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/slab.h>
> > +#include <linux/init.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/nvmem-consumer.h>
> > +#include <linux/nvmem-provider.h>
> > +
> > +#define ONIE_NVMEM_TLV_MAX_LEN 2048
> > +
> > +#define ONIE_NVMEM_HDR_ID "TlvInfo"
> > +
>
> ...
>
> > +
> > +static int onie_nvmem_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct device_node *np = dev->of_node;
> > + struct nvmem_cell_info *cells;
> > + struct onie_nvmem_attr *attr;
> > + struct nvmem_device *nvmem;
> > + struct onie_nvmem *onie;
> > + unsigned int ncells = 0;
> > + int err;
> > +
> > + nvmem = of_nvmem_device_get(np, NULL);
> > + if (IS_ERR(nvmem))
> > + return PTR_ERR(nvmem);
> > +
> TBH, this looks completely incorrect way to do this and misuse of nvmem
> consumer interface.
>
> Ideally nvmem provider driver should populate "cells" in struct nvmem_config
> after decoding them and then register nvmem provider.
>
> That should just work!
>
>
> --srini
But this is not nvmem provider but just describes the cells for any
nvmem device, because ONIE uses special TLV structure on the nvmem
device. So from the nvmem device point it is a consumer but provides the cells
for the given device.

>
>
> > + onie = kmalloc(sizeof(*onie), GFP_KERNEL);
> > + if (!onie) {
> > + err = -ENOMEM;
> > + goto err_nvmem_alloc;
> > + }
> > +
> > + INIT_LIST_HEAD(&onie->attrs);
> > + onie->attr_count = 0;
> > + onie->nvmem = nvmem;
> > +
> > + err = onie_nvmem_decode(onie);
> > + if (err)
> > + goto err_nvmem_decode;
> > +
> > + if (!onie->attr_count) {
> > + pr_err("%s: has no ONIE attributes\n", nvmem_dev_name(nvmem));
> > + err = -EINVAL;
> > + goto err_no_attrs;
> > + }
> > +
> > + cells = kmalloc_array(onie->attr_count, sizeof(*cells), GFP_KERNEL);
> > + if (!cells) {
> > + err = -ENOMEM;
> > + goto err_cells_alloc;
> > + }
> > +
> > + onie->cell_lookup = kmalloc_array(onie->attr_count,
> > + sizeof(struct nvmem_cell_lookup),
> > + GFP_KERNEL);
> > + if (!onie->cell_lookup) {
> > + err = -ENOMEM;
> > + goto err_lookup_alloc;
> > + }
> > +
> > + list_for_each_entry(attr, &onie->attrs, head) {
> > + struct nvmem_cell_lookup *lookup;
> > + struct nvmem_cell_info *cell;
> > +
> > + cell = &cells[ncells];
> > +
> > + lookup = &onie->cell_lookup[ncells];
> > + lookup->con_id = NULL;
> > +
> > + cell->offset = attr->offset;
> > + cell->name = attr->name;
> > + cell->bytes = attr->len;
> > + cell->bit_offset = 0;
> > + cell->nbits = 0;
> > +
> > + lookup->nvmem_name = nvmem_dev_name(onie->nvmem);
> > + lookup->dev_id = dev_name(dev);
> > + lookup->cell_name = cell->name;
> > + lookup->con_id = cell->name;
> > +
> > + ncells++;
> > + }
> > +
> > + onie->cell_tbl.nvmem_name = nvmem_dev_name(onie->nvmem);
> > + onie->cell_tbl.ncells = ncells;
> > + onie->cell_tbl.cells = cells;
> > +
> > + nvmem_add_cell_table(&onie->cell_tbl);
> > + nvmem_add_cell_lookups(onie->cell_lookup, ncells);
> > +
> > + dev_set_drvdata(dev, onie);
> > +
> > + onie_nvmem_attrs_free(onie);
> > +
> > + nvmem_device_put(nvmem);
> > +
> > + return 0;
> > +
> > +err_lookup_alloc:
> > + kfree(onie->cell_tbl.cells);
> > +err_cells_alloc:
> > + onie_nvmem_attrs_free(onie);
> > +err_no_attrs:
> > +err_nvmem_decode:
> > + kfree(onie);
> > +err_nvmem_alloc:
> > + nvmem_device_put(nvmem);
> > +
> > + return err;
> > +}
> > +

\
 
 \ /
  Last update: 2020-06-01 11:04    [W:0.081 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site