lkml.org 
[lkml]   [2020]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 08/10] PCI: qcom: Add ipq8064 rev2 variant and set tx term offset
On Thu, May 14, 2020 at 10:07:09PM +0200, Ansuel Smith wrote:
> Add tx term offset support to pcie qcom driver need in some revision of
> the ipq806x SoC. Ipq8064 have tx term offset set to 7. Ipq8064-v2 revision
> and ipq8065 have the tx term offset set to 0.

Seems like this should be 2 patches or why isn't 'Ipq8064 have tx term
offset set to 7' done in the prior patch? One tweak is needed for
stable, but this isn't?

>
> Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++++++++++--
> 1 file changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index f5398b0d270c..ab6f1bdd24c3 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -45,6 +45,9 @@
> #define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10
>
> #define PCIE20_PARF_PHY_CTRL 0x40
> +#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, 16)
> +#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) ((x) << 16)
> +
> #define PCIE20_PARF_PHY_REFCLK 0x4C
> #define PHY_REFCLK_SSP_EN BIT(16)
> #define PHY_REFCLK_USE_PAD BIT(12)
> @@ -363,7 +366,8 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
> val &= ~BIT(0);
> writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
>
> - if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
> + if (of_device_is_compatible(node, "qcom,pcie-ipq8064") |
> + of_device_is_compatible(node, "qcom,pcie-ipq8064-v2")) {
> writel(PCS_DEEMPH_TX_DEEMPH_GEN1(24) |
> PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(24) |
> PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(34),
> @@ -374,9 +378,18 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
> writel(PHY_RX0_EQ(4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
> }
>
> + if (of_device_is_compatible(node, "qcom,pcie-ipq8064")) {
> + /* set TX termination offset */
> + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
> + val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK;
> + val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(7);
> + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
> + }
> +
> /* enable external reference clock */
> val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
> - val |= BIT(16);
> + val &= ~PHY_REFCLK_USE_PAD;
> + val |= PHY_REFCLK_SSP_EN;
> writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
>
> /* wait for clock acquisition */
> @@ -1452,6 +1465,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
> static const struct of_device_id qcom_pcie_match[] = {
> { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
> { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
> + { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
> { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
> { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
> { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2020-06-01 23:11    [W:0.097 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site