lkml.org 
[lkml]   [2020]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] rtc: fsl-ftm-alarm: fix freeze(s2idle) failed to wake
Date
Use dev_pm_set_wake_irq() instead of flag IRQF_NO_SUSPEND to enable
wakeup system feature for both freeze(s2idle) and mem(deep).

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
Change in v2:
- Remove wakeup-source control since the irq should be able to wakeup.
And this is not the case that RTC interrupt line is not connected
directly to SoC.

drivers/rtc/rtc-fsl-ftm-alarm.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-fsl-ftm-alarm.c b/drivers/rtc/rtc-fsl-ftm-alarm.c
index 756af62..6775205 100644
--- a/drivers/rtc/rtc-fsl-ftm-alarm.c
+++ b/drivers/rtc/rtc-fsl-ftm-alarm.c
@@ -21,6 +21,7 @@
#include <linux/rtc.h>
#include <linux/time.h>
#include <linux/acpi.h>
+#include <linux/pm_wakeirq.h>

#define FTM_SC_CLK(c) ((c) << FTM_SC_CLK_MASK_SHIFT)

@@ -274,7 +275,7 @@ static int ftm_rtc_probe(struct platform_device *pdev)
}

ret = devm_request_irq(&pdev->dev, irq, ftm_rtc_alarm_interrupt,
- IRQF_NO_SUSPEND, dev_name(&pdev->dev), rtc);
+ 0, dev_name(&pdev->dev), rtc);
if (ret < 0) {
dev_err(&pdev->dev, "failed to request irq\n");
return ret;
@@ -287,6 +288,9 @@ static int ftm_rtc_probe(struct platform_device *pdev)
rtc->rtc_dev->ops = &ftm_rtc_ops;

device_init_wakeup(&pdev->dev, true);
+ ret = dev_pm_set_wake_irq(&pdev->dev, irq);
+ if (ret)
+ dev_err(&pdev->dev, "failed to enable irq wake\n");

ret = rtc_register_device(rtc->rtc_dev);
if (ret) {
--
2.7.4
\
 
 \ /
  Last update: 2020-06-01 09:26    [W:0.078 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site