lkml.org 
[lkml]   [2020]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.6 107/177] ARM: dts: mmp3-dell-ariel: Fix the SPI devices
Date
From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit 233cbffaa0b9ca874731efee67a11f005da1f87c ]

I've managed to get about everything wrong while digging these out of
OEM's board file.

Correct the bus numbers, the exact model of the NOR flash, polarity of
the chip selects and align the SPI frequency with the data sheet.

Tested that it works now, with a slight fix to the PXA SSP driver.

Link: https://lore.kernel.org/r/20200419171157.672999-16-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/mmp3-dell-ariel.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts
index 15449c72c042..b0ec14c42164 100644
--- a/arch/arm/boot/dts/mmp3-dell-ariel.dts
+++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts
@@ -98,19 +98,19 @@
status = "okay";
};

-&ssp3 {
+&ssp1 {
status = "okay";
- cs-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;

firmware-flash@0 {
- compatible = "st,m25p80", "jedec,spi-nor";
+ compatible = "winbond,w25q32", "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <40000000>;
+ spi-max-frequency = <104000000>;
m25p,fast-read;
};
};

-&ssp4 {
- cs-gpios = <&gpio 56 GPIO_ACTIVE_HIGH>;
+&ssp2 {
+ cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
status = "okay";
};
--
2.25.1


\
 
 \ /
  Last update: 2020-06-01 20:16    [W:0.641 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site