lkml.org 
[lkml]   [2020]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] serial: lantiq: Make UART's use as console selectable
Date
Lantiq UART driver can be used for system console. Add changes to
make this driver's use as console selectable/configurable.

Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
---
drivers/tty/serial/Kconfig | 9 ++++++++-
drivers/tty/serial/lantiq.c | 11 ++++++++++-
2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 4b0a7b98f8c7..bb4009a1135f 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1037,10 +1037,17 @@ config SERIAL_LANTIQ
bool "Lantiq serial driver"
depends on (LANTIQ || X86) || COMPILE_TEST
select SERIAL_CORE
+ help
+ Support for UART on Lantiq and Intel SoCs.
+
+config SERIAL_LANTIQ_CONSOLE
+ bool "Console on Lantiq UART"
+ depends on SERIAL_LANTIQ=y
select SERIAL_CORE_CONSOLE
select SERIAL_EARLYCON
help
- Support for console and UART on Lantiq SoCs.
+ Select this option if you would like to use a Lantiq UART as the
+ system console.

config SERIAL_QE
tristate "Freescale QUICC Engine serial port support"
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index c5e46ff972e4..d3b62a1be6ad 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -597,6 +597,7 @@ static const struct uart_ops lqasc_pops = {
.verify_port = lqasc_verify_port,
};

+#ifdef CONFIG_SERIAL_LANTIQ_CONSOLE
static void
lqasc_console_putchar(struct uart_port *port, int ch)
{
@@ -705,6 +706,14 @@ lqasc_serial_early_console_setup(struct earlycon_device *device,
OF_EARLYCON_DECLARE(lantiq, "lantiq,asc", lqasc_serial_early_console_setup);
OF_EARLYCON_DECLARE(lantiq, "intel,lgm-asc", lqasc_serial_early_console_setup);

+#define LANTIQ_SERIAL_CONSOLE (&lqasc_console)
+
+#else
+
+#define LANTIQ_SERIAL_CONSOLE NULL
+
+#endif /* CONFIG_SERIAL_LANTIQ_CONSOLE */
+
static struct uart_driver lqasc_reg = {
.owner = THIS_MODULE,
.driver_name = DRVNAME,
@@ -712,7 +721,7 @@ static struct uart_driver lqasc_reg = {
.major = 0,
.minor = 0,
.nr = MAXPORTS,
- .cons = &lqasc_console,
+ .cons = LANTIQ_SERIAL_CONSOLE,
};

static int fetch_irq_lantiq(struct device *dev, struct ltq_uart_port *ltq_port)
--
2.11.0
\
 
 \ /
  Last update: 2020-05-09 08:42    [W:0.043 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site