lkml.org 
[lkml]   [2020]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 10/18] net: dsa: b53: Rework ARL bin logic
Date
From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 6344dbde6a27d10d16246d734b968f84887841e2 ]

When asking the ARL to read a MAC address, we will get a number of bins
returned in a single read. Out of those bins, there can essentially be 3
states:

- all bins are full, we have no space left, and we can either replace an
existing address or return that full condition

- the MAC address was found, then we need to return its bin index and
modify that one, and only that one

- the MAC address was not found and we have a least one bin free, we use
that bin index location then

The code would unfortunately fail on all counts.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/b53/b53_common.c | 30 ++++++++++++++++++++++++++----
drivers/net/dsa/b53/b53_regs.h | 3 +++
2 files changed, 29 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 71525950c641d..060f9b1769298 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1109,6 +1109,7 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
u16 vid, struct b53_arl_entry *ent, u8 *idx,
bool is_valid)
{
+ DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
unsigned int i;
int ret;

@@ -1116,6 +1117,8 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
if (ret)
return ret;

+ bitmap_zero(free_bins, dev->num_arl_entries);
+
/* Read the bins */
for (i = 0; i < dev->num_arl_entries; i++) {
u64 mac_vid;
@@ -1127,13 +1130,21 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
b53_arl_to_entry(ent, mac_vid, fwd_entry);

- if (!(fwd_entry & ARLTBL_VALID))
+ if (!(fwd_entry & ARLTBL_VALID)) {
+ set_bit(i, free_bins);
continue;
+ }
if ((mac_vid & ARLTBL_MAC_MASK) != mac)
continue;
*idx = i;
+ return 0;
}

+ if (bitmap_weight(free_bins, dev->num_arl_entries) == 0)
+ return -ENOSPC;
+
+ *idx = find_first_bit(free_bins, dev->num_arl_entries);
+
return -ENOENT;
}

@@ -1163,10 +1174,21 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
if (op)
return ret;

- /* We could not find a matching MAC, so reset to a new entry */
- if (ret) {
+ switch (ret) {
+ case -ENOSPC:
+ dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
+ addr, vid);
+ return is_valid ? ret : 0;
+ case -ENOENT:
+ /* We could not find a matching MAC, so reset to a new entry */
+ dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
+ addr, vid, idx);
fwd_entry = 0;
- idx = 1;
+ break;
+ default:
+ dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
+ addr, vid, idx);
+ break;
}

memset(&ent, 0, sizeof(ent));
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 85c44bfba55a2..3cf246c6bdcc4 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -280,6 +280,9 @@
#define ARLTBL_STATIC BIT(15)
#define ARLTBL_VALID BIT(16)

+/* Maximum number of bin entries in the ARL for all switches */
+#define B53_ARLTBL_MAX_BIN_ENTRIES 4
+
/* ARL Search Control Register (8 bit) */
#define B53_ARL_SRCH_CTL 0x50
#define B53_ARL_SRCH_CTL_25 0x20
--
2.20.1


\
 
 \ /
  Last update: 2020-05-08 14:50    [W:0.176 / U:1.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site