lkml.org 
[lkml]   [2020]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] libata: Fix retrieving of active qcs
On Sun, May 03, 2020 at 11:46:27PM +0200, Pali Rohár wrote:
> On Monday 27 January 2020 12:24:28 Sascha Hauer wrote:
> > On Mon, Jan 27, 2020 at 12:16:30PM +0100, Pali Rohár wrote:
> > > On Monday 06 January 2020 09:16:05 Sascha Hauer wrote:
> > > > On Wed, Dec 25, 2019 at 07:18:40PM +0100, Pali Rohár wrote:
> > > > > Hello Sascha!
> > > > >
> > > > > On Friday 13 December 2019 09:04:08 Sascha Hauer wrote:
> > > > > > ata_qc_complete_multiple() is called with a mask of the still active
> > > > > > tags.
> > > > > >
> > > > > > mv_sata doesn't have this information directly and instead calculates
> > > > > > the still active tags from the started tags (ap->qc_active) and the
> > > > > > finished tags as (ap->qc_active ^ done_mask)
> > > > > >
> > > > > > Since 28361c40368 the hw_tag and tag are no longer the same and the
> > > > > > equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is
> > > > > > initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is
> > > > > > started and this will be in done_mask on completion. ap->qc_active ^
> > > > > > done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as
> > > > > > the internal tag will never be reported as completed.
> > > > > >
> > > > > > This is fixed by introducing ata_qc_get_active() which returns the
> > > > > > active hardware tags and calling it where appropriate.
> > > > > >
> > > > > > This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same
> > > > > > problem. There is another case in sata_nv that most likely needs fixing
> > > > > > as well, but this looks a little different, so I wasn't confident enough
> > > > > > to change that.
> > > > >
> > > > > I can confirm that sata_nv.ko does not work in 4.18 (and new) kernel
> > > > > version correctly. More details are in email:
> > > > >
> > > > > https://lore.kernel.org/linux-ide/20191225180824.bql2o5whougii4ch@pali/T/
> > > > >
> > > > > I tried this patch and it fixed above problems with sata_nv.ko. It just
> > > > > needs small modification (see below).
> > > > >
> > > > > So you can add my:
> > > > >
> > > > > Tested-by: Pali Rohár <pali.rohar@gmail.com>
> > > > >
> > > > > And I hope that patch would be backported to 4.18 and 4.19 stable
> > > > > branches soon as distributions kernels are broken for machines with
> > > > > these nvidia sata controllers.
> > > > >
> > > > > Anyway, what is that another case in sata_nv which needs to be fixed
> > > > > too?
> > > >
> > > > It's in nv_swncq_sdbfis(). Here we have:
> > > >
> > > > sactive = readl(pp->sactive_block);
> > > > done_mask = pp->qc_active ^ sactive;
> > > >
> > > > pp->qc_active &= ~done_mask;
> > > > pp->dhfis_bits &= ~done_mask;
> > > > pp->dmafis_bits &= ~done_mask;
> > > > pp->sdbfis_bits |= done_mask;
> > > > ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask);
> > > >
> > > > Sascha
> > >
> > > Ok. Are you going to fix also this case?
> >
> > As said, this one looks slightly different than the others and I would
> > prefer if somebody could fix it who actually has a hardware and can test
> > it.
>
> Well, I have hardware and could test changes. But I'm not really sure
> that I understand this part of code. So it would be better if somebody
> else with better knowledge prepares patches I could test them. But
> currently during coronavirus I have only remote ssh access, so boot,
> modify/compile/reboot process is quite slower.

Ok, here we go. Compile tested only.

Regards,
Sascha

------------------------------8<-----------------------------------

From fcdcfa9e7a4ee4faf411de1df4f3c4e12c78545c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 8 May 2020 07:28:19 +0200
Subject: [PATCH] ata: sata_nv: Fix retrieving of active qcs

ata_qc_complete_multiple() has to be called with the tags physically
active, that is the hw tag is at bit 0. ap->qc_active has the same tag
at bit ATA_TAG_INTERNAL instead, so call ata_qc_get_active() to fix that
up. This is done in the vein of 8385d756e114 ("libata: Fix retrieving of
active qcs").

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/ata/sata_nv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index eb9dc14e5147..20190f66ced9 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -2100,7 +2100,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
pp->dhfis_bits &= ~done_mask;
pp->dmafis_bits &= ~done_mask;
pp->sdbfis_bits |= done_mask;
- ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask);
+ ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask);

if (!ap->qc_active) {
DPRINTK("over\n");
--
2.26.2
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
\
 
 \ /
  Last update: 2020-05-08 07:47    [W:0.072 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site