lkml.org 
[lkml]   [2020]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] net: broadcom: Imply BROADCOM_PHY for BCMGENET
Date
The GENET controller on the Raspberry Pi 4 (2711) is typically
interfaced with an external Broadcom PHY via a RGMII electrical
interface. To make sure that delays are properly configured at the PHY
side, ensure that we get a chance to have the dedicated Broadcom PHY
driver (CONFIG_BROADCOM_PHY) enabled for this to happen.

Fixes: 402482a6a78e ("net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not needed")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
David,

I would like Marek to indicate whether he is okay or not with this
change. Thanks!

drivers/net/ethernet/broadcom/Kconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 53055ce5dfd6..8a70b9152f7c 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -69,6 +69,7 @@ config BCMGENET
select BCM7XXX_PHY
select MDIO_BCM_UNIMAC
select DIMLIB
+ imply BROADCOM_PHY if ARCH_BCM2835
help
This driver supports the built-in Ethernet MACs found in the
Broadcom BCM7xxx Set Top Box family chipset.
--
2.17.1
\
 
 \ /
  Last update: 2020-05-09 00:32    [W:0.062 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site