lkml.org 
[lkml]   [2020]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dtc: Remove warning for I2C_OWN_SLAVE_ADDRESS
Date
dtc does a sanity check on reg properties that they are within the 10
bit address range for i2c slave addresses. In the case of multi-master
buses the binding may describe an address that the bus will listen on as
a device. Do not warn when this flag is set.

This fixes the following build warnings reported by Stephen:

arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:126.11-130.4:
Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@80/ipmb1@10:
I2C bus unit address format error, expected "40000010"
arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts:128.3-30:
Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@80/ipmb1@10:reg:
I2C address must be less than 10-bits, got "0x40000010"

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
scripts/dtc/checks.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c
index 4b3c486f1399..986754f858cf 100644
--- a/scripts/dtc/checks.c
+++ b/scripts/dtc/checks.c
@@ -1022,6 +1022,8 @@ static void check_i2c_bus_bridge(struct check *c, struct dt_info *dti, struct no
}
WARNING(i2c_bus_bridge, check_i2c_bus_bridge, NULL, &addr_size_cells);

+#define I2C_OWN_SLAVE_ADDRESS (1 << 30)
+
static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node *node)
{
struct property *prop;
@@ -1044,6 +1046,8 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node
}

reg = fdt32_to_cpu(*cells);
+ /* Ingore I2C_OWN_SLAVE_ADDRESS */
+ reg &= ~I2C_OWN_SLAVE_ADDRESS;
snprintf(unit_addr, sizeof(unit_addr), "%x", reg);
if (!streq(unitname, unit_addr))
FAIL(c, dti, node, "I2C bus unit address format error, expected \"%s\"",
@@ -1051,6 +1055,8 @@ static void check_i2c_bus_reg(struct check *c, struct dt_info *dti, struct node

for (len = prop->val.len; len > 0; len -= 4) {
reg = fdt32_to_cpu(*(cells++));
+ /* Ingore I2C_OWN_SLAVE_ADDRESS */
+ reg &= ~I2C_OWN_SLAVE_ADDRESS;
if (reg > 0x3ff)
FAIL_PROP(c, dti, node, prop, "I2C address must be less than 10-bits, got \"0x%x\"",
reg);
--
2.26.2
\
 
 \ /
  Last update: 2020-05-08 08:39    [W:0.041 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site