lkml.org 
[lkml]   [2020]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/3] iio: cros_ec: Add support for RGB light sensor
On Wed, 6 May 2020 16:03:21 -0700
Gwendal Grignou <gwendal@chromium.org> wrote:

> Add support for color light sensor presented by the Chromebook Embedded
> Controller (EC).
> Instead of just presenting lux measurement (clear channel), a color light
> sensor is able to report color temperature measurement.
>
> The EC, using factory settings, can transform the raw measurement into
> the CIE 1931 XYZ color space (XYZ) and take adavantage of color sensor
> autocalibration to provide the most accurate measurements.

v3 of series with v2 patches?

Also my earlier comment about colour channels cannot be illuminance
still stands. It is a term that "only" applies to light measurements with
a particular frequency / sensitivity curve.

The colour channels should all be in_intensity_xxx_raw.

If you want to do the computation in driver to derive the illuminance
that would be great, otherwise we shouldn't have any illuminance channels.

Jonathan


>
> Gwendal Grignou (3):
> iio: Add in_illumincance vectors in different color spaces
> iio: cros_ec: Allow enabling/disabling calibration mode
> iio: cros_ec_light: Add support for RGB sensor
>
> Documentation/ABI/testing/sysfs-bus-iio | 27 +
> .../cros_ec_sensors/cros_ec_sensors_core.c | 3 +-
> drivers/iio/light/cros_ec_light_prox.c | 469 +++++++++++++++---
> drivers/platform/chrome/cros_ec_sensorhub.c | 3 +
> .../linux/iio/common/cros_ec_sensors_core.h | 1 -
> .../linux/platform_data/cros_ec_commands.h | 14 +-
> 6 files changed, 441 insertions(+), 76 deletions(-)
>


\
 
 \ /
  Last update: 2020-05-08 16:57    [W:0.113 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site