lkml.org 
[lkml]   [2020]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 2/3] phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver
Hi Kishon,

On Thu, May 07, 2020 at 10:14:45AM +0530, Kishon Vijay Abraham I wrote:
> On 4/2/2020 3:40 AM, Laurent Pinchart wrote:
> > From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
> >
> > Xilinx ZynqMP SoCs have a Gigabit Transceiver with four lanes. All the
> > high speed peripherals such as USB, SATA, PCIE, Display Port and
> > Ethernet SGMII can rely on any of the four GT lanes for PHY layer. This
> > patch adds driver for that ZynqMP GT core.
> >
> > Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > Changes since v5:
> >
> > - Cleanup headers
> > - Organize the code in sections
> > - Constify data tables and structures
> > - Allocate all PHY instances in one go
> > - Add I/O accessors
> > - Move DP-specific init to a separate function
> > - Use devm_platform_ioremap_resource_byname()
> > - Simplify acquisition of reset controllers
> > - Implement .configure() PHY operation for DP
> > - Implement .power_on() and .power_off() operations
> > - Wait for PLL lock for DP PHY too
> > - Remove USB core reset operations
> > - Fix SGMII bus width settings
> > - Update copyright notice and authors list
> > - Disable error messages on probe deferral
> > - Update reset names to new DT bindings
> > - Update to removal of subnodes in new DT bindings
> > - Handle reference clocks through CCF
> > - Add MAINTAINERS entry
> > - Drop reset handling
> > - Split TX term fix to separate function
> > - Remove unused registers
> > ---
> > MAINTAINERS | 9 +
> > drivers/phy/Kconfig | 8 +
> > drivers/phy/Makefile | 1 +
> > drivers/phy/phy-zynqmp.c | 995 +++++++++++++++++++++++++++++++++++++++
>
> Better to add a xilinx directory for this driver.

OK.

> > 4 files changed, 1013 insertions(+)
> > create mode 100644 drivers/phy/phy-zynqmp.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 07293073c4f6..19e630fcaf62 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -18406,6 +18406,15 @@ F: Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
> > F: drivers/dma/xilinx/xilinx_dpdma.c
> > F: include/dt-bindings/dma/xlnx-zynqmp-dpdma.h
> >
> > +XILINX ZYNQMP GSPTR PHY DRIVER
>
> Looks like a typo here, rest of the place seems to use PSGTR

Good catch. Will fix it.

> > +M: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
> > +M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > +L: linux-kernel@vger.kernel.org
> > +T: git https://github.com/Xilinx/linux-xlnx.git
> > +S: Supported
> > +F: Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
> > +F: drivers/phy/phy-zynqmp.c
> > +
> > XILLYBUS DRIVER
> > M: Eli Billauer <eli.billauer@gmail.com>
> > L: linux-kernel@vger.kernel.org
> > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> > index b3ed94b98d9b..b8251b9f3d87 100644
> > --- a/drivers/phy/Kconfig
> > +++ b/drivers/phy/Kconfig
> > @@ -49,6 +49,14 @@ config PHY_XGENE
> > help
> > This option enables support for APM X-Gene SoC multi-purpose PHY.
> >
> > +config PHY_XILINX_ZYNQMP
> > + tristate "Xilinx ZynqMP PHY driver"
> > + depends on ARCH_ZYNQMP
> > + select GENERIC_PHY
> > + help
> > + Enable this to support ZynqMP High Speed Gigabit Transceiver
> > + that is part of ZynqMP SoC.
> > +
> > source "drivers/phy/allwinner/Kconfig"
> > source "drivers/phy/amlogic/Kconfig"
> > source "drivers/phy/broadcom/Kconfig"
> > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> > index 310c149a9df5..5dc7469f078b 100644
> > --- a/drivers/phy/Makefile
> > +++ b/drivers/phy/Makefile
> > @@ -8,6 +8,7 @@ obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o
> > obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
> > obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
> > obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
> > +obj-$(CONFIG_PHY_XILINX_ZYNQMP) += phy-zynqmp.o
> > obj-$(CONFIG_ARCH_SUNXI) += allwinner/
> > obj-$(CONFIG_ARCH_MESON) += amlogic/
> > obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
> > diff --git a/drivers/phy/phy-zynqmp.c b/drivers/phy/phy-zynqmp.c
> > new file mode 100644
> > index 000000000000..8ab99d6b9220
> > --- /dev/null
> > +++ b/drivers/phy/phy-zynqmp.c
> > @@ -0,0 +1,995 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * phy-zynqmp.c - PHY driver for Xilinx ZynqMP GT.
> > + *
> > + * Copyright (C) 2018-20 Xilinx Inc.
> > + *
> > + * Author: Anurag Kumar Vulisha <anuragku@xilinx.com>
> > + * Author: Subbaraya Sundeep <sundeep.lkml@gmail.com>
> > + * Author: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > + *
> > + * This driver is tested for USB, SATA and Display Port currently.
> > + * Other controllers PCIe and SGMII should also work but that is
> > + * experimental as of now.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +
> > +#include <dt-bindings/phy/phy.h>
> > +
> > +/*
> > + * Lane Registers
> > + */
> > +
> > +/* TX De-emphasis parameters */
> > +#define L0_TX_ANA_TM_18 0x0048
> > +#define L0_TX_ANA_TM_118 0x01d8
> > +#define L0_TX_ANA_TM_118_FORCE_17_0 BIT(0)
> > +
> > +/* DN Resistor calibration code parameters */
> > +#define L0_TXPMA_ST_3 0x0b0c
> > +#define L0_DN_CALIB_CODE 0x3f
> > +
> > +/* PMA control parameters */
> > +#define L0_TXPMD_TM_45 0x0cb4
> > +#define L0_TXPMD_TM_48 0x0cc0
> > +#define L0_TXPMD_TM_45_OVER_DP_MAIN BIT(0)
> > +#define L0_TXPMD_TM_45_ENABLE_DP_MAIN BIT(1)
> > +#define L0_TXPMD_TM_45_OVER_DP_POST1 BIT(2)
> > +#define L0_TXPMD_TM_45_ENABLE_DP_POST1 BIT(3)
> > +#define L0_TXPMD_TM_45_OVER_DP_POST2 BIT(4)
> > +#define L0_TXPMD_TM_45_ENABLE_DP_POST2 BIT(5)
> > +
> > +/* PCS control parameters */
> > +#define L0_TM_DIG_6 0x106c
> > +#define L0_TM_DIS_DESCRAMBLE_DECODER 0x0f
> > +#define L0_TX_DIG_61 0x00f4
> > +#define L0_TM_DISABLE_SCRAMBLE_ENCODER 0x0f
> > +
> > +/* PLL Test Mode register parameters */
> > +#define L0_TM_PLL_DIG_37 0x2094
> > +#define L0_TM_COARSE_CODE_LIMIT 0x10
> > +
> > +/* PLL SSC step size offsets */
> > +#define L0_PLL_SS_STEPS_0_LSB 0x2368
> > +#define L0_PLL_SS_STEPS_1_MSB 0x236c
> > +#define L0_PLL_SS_STEP_SIZE_0_LSB 0x2370
> > +#define L0_PLL_SS_STEP_SIZE_1 0x2374
> > +#define L0_PLL_SS_STEP_SIZE_2 0x2378
> > +#define L0_PLL_SS_STEP_SIZE_3_MSB 0x237c
> > +#define L0_PLL_STATUS_READ_1 0x23e4
> > +
> > +/* SSC step size parameters */
> > +#define STEP_SIZE_0_MASK 0xff
> > +#define STEP_SIZE_1_MASK 0xff
> > +#define STEP_SIZE_2_MASK 0xff
> > +#define STEP_SIZE_3_MASK 0x3
> > +#define STEP_SIZE_SHIFT 8
> > +#define FORCE_STEP_SIZE 0x10
> > +#define FORCE_STEPS 0x20
> > +#define STEPS_0_MASK 0xff
> > +#define STEPS_1_MASK 0x07
> > +
> > +/* Reference clock selection parameters */
> > +#define L0_Ln_REF_CLK_SEL(n) (0x2860 + (n) * 4)
> > +#define L0_REF_CLK_SEL_MASK 0x8f
> > +
> > +/* Calibration digital logic parameters */
> > +#define L3_TM_CALIB_DIG19 0xec4c
> > +#define L3_CALIB_DONE_STATUS 0xef14
> > +#define L3_TM_CALIB_DIG18 0xec48
> > +#define L3_TM_CALIB_DIG19_NSW 0x07
> > +#define L3_TM_CALIB_DIG18_NSW 0xe0
> > +#define L3_TM_OVERRIDE_NSW_CODE 0x20
> > +#define L3_CALIB_DONE 0x02
> > +#define L3_NSW_SHIFT 5
> > +#define L3_NSW_PIPE_SHIFT 4
> > +#define L3_NSW_CALIB_SHIFT 3
> > +
> > +#define PHY_REG_OFFSET 0x4000
> > +
> > +/*
> > + * Global Registers
> > + */
> > +
> > +/* Refclk selection parameters */
> > +#define PLL_REF_SEL(n) (0x10000 + (n) * 4)
> > +#define PLL_FREQ_MASK 0x1f
> > +#define PLL_STATUS_LOCKED 0x10
> > +
> > +/* Inter Connect Matrix parameters */
> > +#define ICM_CFG0 0x10010
> > +#define ICM_CFG1 0x10014
> > +#define ICM_CFG0_L0_MASK 0x07
> > +#define ICM_CFG0_L1_MASK 0x70
> > +#define ICM_CFG1_L2_MASK 0x07
> > +#define ICM_CFG2_L3_MASK 0x70
> > +#define ICM_CFG_SHIFT 4
> > +
> > +/* Inter Connect Matrix allowed protocols */
> > +#define ICM_PROTOCOL_PD 0x0
> > +#define ICM_PROTOCOL_PCIE 0x1
> > +#define ICM_PROTOCOL_SATA 0x2
> > +#define ICM_PROTOCOL_USB 0x3
> > +#define ICM_PROTOCOL_DP 0x4
> > +#define ICM_PROTOCOL_SGMII 0x5
> > +
> > +/* Test Mode common reset control parameters */
> > +#define TM_CMN_RST 0x10018
> > +#define TM_CMN_RST_EN 0x1
> > +#define TM_CMN_RST_SET 0x2
> > +#define TM_CMN_RST_MASK 0x3
> > +
> > +/* Bus width parameters */
> > +#define TX_PROT_BUS_WIDTH 0x10040
> > +#define RX_PROT_BUS_WIDTH 0x10044
> > +#define PROT_BUS_WIDTH_10 0x0
> > +#define PROT_BUS_WIDTH_20 0x1
> > +#define PROT_BUS_WIDTH_40 0x2
> > +#define PROT_BUS_WIDTH_SHIFT 2
> > +
> > +/* Number of GT lanes */
> > +#define NUM_LANES 4
> > +
> > +/* SIOU SATA control register */
> > +#define SATA_CONTROL_OFFSET 0x0100
> > +
> > +/* Total number of controllers */
> > +#define CONTROLLERS_PER_LANE 5
> > +
> > +/* Protocol Type parameters */
> > +#define XPSGTR_TYPE_USB0 0 /* USB controller 0 */
> > +#define XPSGTR_TYPE_USB1 1 /* USB controller 1 */
> > +#define XPSGTR_TYPE_SATA_0 2 /* SATA controller lane 0 */
> > +#define XPSGTR_TYPE_SATA_1 3 /* SATA controller lane 1 */
> > +#define XPSGTR_TYPE_PCIE_0 4 /* PCIe controller lane 0 */
> > +#define XPSGTR_TYPE_PCIE_1 5 /* PCIe controller lane 1 */
> > +#define XPSGTR_TYPE_PCIE_2 6 /* PCIe controller lane 2 */
> > +#define XPSGTR_TYPE_PCIE_3 7 /* PCIe controller lane 3 */
> > +#define XPSGTR_TYPE_DP_0 8 /* Display Port controller lane 0 */
> > +#define XPSGTR_TYPE_DP_1 9 /* Display Port controller lane 1 */
> > +#define XPSGTR_TYPE_SGMII0 10 /* Ethernet SGMII controller 0 */
> > +#define XPSGTR_TYPE_SGMII1 11 /* Ethernet SGMII controller 1 */
> > +#define XPSGTR_TYPE_SGMII2 12 /* Ethernet SGMII controller 2 */
> > +#define XPSGTR_TYPE_SGMII3 13 /* Ethernet SGMII controller 3 */
> > +
> > +/* Timeout values */
> > +#define TIMEOUT_US 1000
> > +
> > +struct xpsgtr_dev;
> > +
> > +/**
> > + * struct xpsgtr_ssc - structure to hold SSC settings for a lane
> > + * @refclk_rate: PLL reference clock frequency
> > + * @pll_ref_clk: value to be written to register for corresponding ref clk rate
> > + * @steps: number of steps of SSC (Spread Spectrum Clock)
> > + * @step_size: step size of each step
> > + */
> > +struct xpsgtr_ssc {
> > + u32 refclk_rate;
> > + u8 pll_ref_clk;
> > + u32 steps;
> > + u32 step_size;
> > +};
> > +
> > +/**
> > + * struct xpsgtr_phy - representation of a lane
> > + * @phy: pointer to the kernel PHY device
> > + * @type: controller which uses this lane
> > + * @lane: lane number
> > + * @protocol: protocol in which the lane operates
> > + * @skip_phy_init: skip phy_init() if true
> > + * @dev: pointer to the xpsgtr_dev instance
> > + * @refclk: reference clock index
> > + */
> > +struct xpsgtr_phy {
> > + struct phy *phy;
> > + u8 type;
> > + u8 lane;
> > + u8 protocol;
> > + bool skip_phy_init;
> > + struct xpsgtr_dev *dev;
> > + unsigned int refclk;
> > +};
> > +
> > +/**
> > + * struct xpsgtr_dev - representation of a ZynMP GT device
> > + * @dev: pointer to device
> > + * @serdes: serdes base address
> > + * @siou: siou base address
> > + * @gtr_mutex: mutex for locking
> > + * @phys: PHY lanes
> > + * @refclk_sscs: spread spectrum settings for the reference clocks
> > + * @tx_term_fix: fix for GT issue
> > + * @saved_icm_cfg0: stored value of ICM CFG0 register
> > + * @saved_icm_cfg1: stored value of ICM CFG1 register
> > + */
> > +struct xpsgtr_dev {
> > + struct device *dev;
> > + void __iomem *serdes;
> > + void __iomem *siou;
> > + struct mutex gtr_mutex; /* mutex for locking */
> > + struct xpsgtr_phy phys[NUM_LANES];
> > + const struct xpsgtr_ssc *refclk_sscs[NUM_LANES];
> > + bool tx_term_fix;
> > + unsigned int saved_icm_cfg0;
> > + unsigned int saved_icm_cfg1;
> > +};
> > +
> > +/* -----------------------------------------------------------------------------
>
> The dash here is not commonly used. Please stick to default multi-line comment
> style.

It's more common in some subsystems than others :-) No big deal, I'll
drop it (even if I think it increases readability by clearly marking
sections visually).

> > + * Configuration Data
> > + */
> > +
> > +/* lookup table to hold all settings needed for a ref clock frequency */
> > +static const struct xpsgtr_ssc ssc_lookup[] = {
> > + { 19200000, 0x05, 608, 264020 },
> > + { 20000000, 0x06, 634, 243454 },
> > + { 24000000, 0x07, 760, 168973 },
> > + { 26000000, 0x08, 824, 143860 },
> > + { 27000000, 0x09, 856, 86551 },
> > + { 38400000, 0x0a, 1218, 65896 },
> > + { 40000000, 0x0b, 634, 243454 },
> > + { 52000000, 0x0c, 824, 143860 },
> > + { 100000000, 0x0d, 1058, 87533 },
> > + { 108000000, 0x0e, 856, 86551 },
> > + { 125000000, 0x0f, 992, 119497 },
> > + { 135000000, 0x10, 1070, 55393 },
> > + { 150000000, 0x11, 792, 187091 }
> > +};
> > +
> > +/* -----------------------------------------------------------------------------
> > + * I/O Accessors
> > + */
> > +
> > +static inline u32 xpsgtr_read(struct xpsgtr_dev *gtr_dev, u32 reg)
> > +{
> > + return readl(gtr_dev->serdes + reg);
> > +}
> > +
> > +static inline void xpsgtr_write(struct xpsgtr_dev *gtr_dev, u32 reg, u32 value)
> > +{
> > + writel(value, gtr_dev->serdes + reg);
> > +}
> > +
> > +static inline void xpsgtr_clr_set(struct xpsgtr_dev *gtr_dev, u32 reg,
> > + u32 clr, u32 set)
> > +{
> > + u32 value = xpsgtr_read(gtr_dev, reg);
> > +
> > + value &= ~clr;
> > + value |= set;
> > + xpsgtr_write(gtr_dev, reg, value);
> > +}
> > +
> > +static inline u32 xpsgtr_read_phy(struct xpsgtr_phy *gtr_phy, u32 reg)
> > +{
> > + void __iomem *addr = gtr_phy->dev->serdes
> > + + gtr_phy->lane * PHY_REG_OFFSET + reg;
> > +
> > + return readl(addr);
> > +}
> > +
> > +static inline void xpsgtr_write_phy(struct xpsgtr_phy *gtr_phy,
> > + u32 reg, u32 value)
> > +{
> > + void __iomem *addr = gtr_phy->dev->serdes
> > + + gtr_phy->lane * PHY_REG_OFFSET + reg;
> > +
> > + writel(value, addr);
> > +}
> > +
> > +static inline void xpsgtr_clr_set_phy(struct xpsgtr_phy *gtr_phy,
> > + u32 reg, u32 clr, u32 set)
> > +{
> > + void __iomem *addr = gtr_phy->dev->serdes
> > + + gtr_phy->lane * PHY_REG_OFFSET + reg;
> > +
> > + writel((readl(addr) & ~clr) | set, addr);
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Hardware Configuration
> > + */
> > +
> > +/* Wait for the PLL to lock (with a timeout). */
> > +static int xpsgtr_wait_pll_lock(struct phy *phy)
> > +{
> > + struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
> > + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> > + unsigned int timeout = TIMEOUT_US;
> > + int ret;
> > +
> > + dev_dbg(gtr_dev->dev, "Waiting for PLL lock\n");
> > +
> > + while (1) {
> > + u32 reg = xpsgtr_read_phy(gtr_phy, L0_PLL_STATUS_READ_1);
> > +
> > + if ((reg & PLL_STATUS_LOCKED) == PLL_STATUS_LOCKED) {
> > + ret = 0;
> > + break;
> > + }
> > +
> > + if (--timeout == 0) {
> > + ret = -ETIMEDOUT;
> > + break;
> > + }
> > +
> > + udelay(1);
> > + }
> > +
> > + if (ret == -ETIMEDOUT)
> > + dev_err(gtr_dev->dev,
> > + "lane %u (type %u, protocol %u): PLL lock timeout\n",
> > + gtr_phy->lane, gtr_phy->type, gtr_phy->protocol);
> > +
> > + return ret;
> > +}
> > +
> > +/* Configure PLL and spread-sprectrum clock. */
> > +static void xpsgtr_configure_pll(struct xpsgtr_phy *gtr_phy)
> > +{
> > + const struct xpsgtr_ssc *ssc;
> > + u32 step_size;
> > +
> > + ssc = gtr_phy->dev->refclk_sscs[gtr_phy->refclk];
> > + step_size = ssc->step_size;
> > +
> > + xpsgtr_clr_set(gtr_phy->dev, PLL_REF_SEL(gtr_phy->lane),
> > + PLL_FREQ_MASK, ssc->pll_ref_clk);
> > +
> > + /* Enable lane clock sharing, if required */
> > + if (gtr_phy->refclk != gtr_phy->lane) {
> > + /* Lane3 Ref Clock Selection Register */
> > + xpsgtr_clr_set(gtr_phy->dev, L0_Ln_REF_CLK_SEL(gtr_phy->lane),
> > + L0_REF_CLK_SEL_MASK, 1 << gtr_phy->refclk);
> > + }
> > +
> > + /* SSC step size [7:0] */
> > + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_0_LSB,
> > + STEP_SIZE_0_MASK, step_size & STEP_SIZE_0_MASK);
> > +
> > + /* SSC step size [15:8] */
> > + step_size >>= STEP_SIZE_SHIFT;
> > + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_1,
> > + STEP_SIZE_1_MASK, step_size & STEP_SIZE_1_MASK);
> > +
> > + /* SSC step size [23:16] */
> > + step_size >>= STEP_SIZE_SHIFT;
> > + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_2,
> > + STEP_SIZE_2_MASK, step_size & STEP_SIZE_2_MASK);
> > +
> > + /* SSC steps [7:0] */
> > + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEPS_0_LSB,
> > + STEPS_0_MASK, ssc->steps & STEPS_0_MASK);
> > +
> > + /* SSC steps [10:8] */
> > + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEPS_1_MSB,
> > + STEPS_1_MASK,
> > + (ssc->steps >> STEP_SIZE_SHIFT) & STEPS_1_MASK);
> > +
> > + /* SSC step size [24:25] */
> > + step_size >>= STEP_SIZE_SHIFT;
> > + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_3_MSB,
> > + STEP_SIZE_3_MASK, (step_size & STEP_SIZE_3_MASK) |
> > + FORCE_STEP_SIZE | FORCE_STEPS);
> > +}
> > +
> > +/* Configure the lane protocol. */
> > +static void xpsgtr_lane_set_protocol(struct xpsgtr_phy *gtr_phy)
> > +{
> > + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> > + u8 protocol = gtr_phy->protocol;
> > +
> > + switch (gtr_phy->lane) {
> > + case 0:
> > + xpsgtr_clr_set(gtr_dev, ICM_CFG0, ICM_CFG0_L0_MASK, protocol);
> > + break;
> > + case 1:
> > + xpsgtr_clr_set(gtr_dev, ICM_CFG0, ICM_CFG0_L1_MASK,
> > + protocol << ICM_CFG_SHIFT);
> > + break;
> > + case 2:
> > + xpsgtr_clr_set(gtr_dev, ICM_CFG1, ICM_CFG0_L0_MASK, protocol);
> > + break;
> > + case 3:
> > + xpsgtr_clr_set(gtr_dev, ICM_CFG1, ICM_CFG0_L1_MASK,
> > + protocol << ICM_CFG_SHIFT);
> > + break;
> > + default:
> > + /* We already checked 0 <= lane <= 3 */
> > + break;
> > + }
> > +}
> > +
> > +/* Bypass (de)scrambler and 8b/10b decoder and encoder. */
> > +static void xpsgtr_bypass_scrambler_8b10b(struct xpsgtr_phy *gtr_phy)
> > +{
> > + xpsgtr_write_phy(gtr_phy, L0_TM_DIG_6, L0_TM_DIS_DESCRAMBLE_DECODER);
> > + xpsgtr_write_phy(gtr_phy, L0_TX_DIG_61, L0_TM_DISABLE_SCRAMBLE_ENCODER);
> > +}
> > +
> > +/* DP-specific initialization. */
> > +static void xpsgtr_phy_init_dp(struct xpsgtr_phy *gtr_phy)
> > +{
> > + xpsgtr_write_phy(gtr_phy, L0_TXPMD_TM_45,
> > + L0_TXPMD_TM_45_OVER_DP_MAIN |
> > + L0_TXPMD_TM_45_ENABLE_DP_MAIN |
> > + L0_TXPMD_TM_45_OVER_DP_POST1 |
> > + L0_TXPMD_TM_45_OVER_DP_POST2 |
> > + L0_TXPMD_TM_45_ENABLE_DP_POST2);
> > + xpsgtr_write_phy(gtr_phy, L0_TX_ANA_TM_118,
> > + L0_TX_ANA_TM_118_FORCE_17_0);
> > +}
> > +
> > +/* SATA-specific initialization. */
> > +static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy)
> > +{
> > + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> > +
> > + xpsgtr_bypass_scrambler_8b10b(gtr_phy);
> > +
> > + writel(gtr_phy->lane, gtr_dev->siou + SATA_CONTROL_OFFSET);
> > +}
>
> The cover letter mentions this has been tested with DP. Was it tested with SATA
> and SGMII as well?

On the Xilinx downstream kernel only, as SATA and SGMII isn't available
upstream yet.

> > +
> > +/* SGMII-specific initialization. */
> > +static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy)
> > +{
> > + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> > +
> > + /* Set SGMII protocol TX and RX bus width to 10 bits. */
> > + xpsgtr_write(gtr_dev, TX_PROT_BUS_WIDTH,
> > + PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
> > + xpsgtr_write(gtr_dev, RX_PROT_BUS_WIDTH,
> > + PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
> > +
> > + xpsgtr_bypass_scrambler_8b10b(gtr_phy);
> > +}
> > +
> > +/* Configure TX de-emphasis and margining for DP. */
> > +static void xpsgtr_phy_configure_dp(struct xpsgtr_phy *gtr_phy, unsigned int pre,
> > + unsigned int voltage)
> > +{
> > + static const u8 voltage_swing[4][4] = {
> > + { 0x2a, 0x27, 0x24, 0x20 },
> > + { 0x27, 0x23, 0x20, 0xff },
> > + { 0x24, 0x20, 0xff, 0xff },
> > + { 0xff, 0xff, 0xff, 0xff }
> > + };
> > + static const u8 pre_emphasis[4][4] = {
> > + { 0x02, 0x02, 0x02, 0x02 },
> > + { 0x01, 0x01, 0x01, 0xff },
> > + { 0x00, 0x00, 0xff, 0xff },
> > + { 0xff, 0xff, 0xff, 0xff }
> > + };
> > +
> > + xpsgtr_write_phy(gtr_phy, L0_TXPMD_TM_48, voltage_swing[pre][voltage]);
> > + xpsgtr_write_phy(gtr_phy, L0_TX_ANA_TM_18, pre_emphasis[pre][voltage]);
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> > + * PHY Operations
> > + */
> > +
> > +static bool xpsgtr_phy_init_required(struct xpsgtr_phy *gtr_phy)
> > +{
> > + /*
> > + * As USB may save the snapshot of the states during hibernation, doing
> > + * phy_init() will put the USB controller into reset, resulting in the
> > + * losing of the saved snapshot. So try to avoid phy_init() for USB
> > + * except when gtr_phy->skip_phy_init is false (this happens when FPD is
> > + * shutdown during suspend or when gt lane is changed from current one)
> > + */
> > + if (gtr_phy->protocol == ICM_PROTOCOL_USB && gtr_phy->skip_phy_init)
> > + return false;
> > + else
>
> 'else' here is un-necessary.

Does it hurt though ? I find it more readable.

> > + return true;
> > +}
> > +
> > +/*
> > + * There is a functional issue in the GT. The TX termination resistance can be
> > + * out of spec due to a issue in the calibration logic. This is the workaround
> > + * to fix it, required for XCZU9EG silicon.
> > + */
> > +static int xpsgtr_phy_tx_term_fix(struct xpsgtr_phy *gtr_phy)
> > +{
> > + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> > + u32 timeout = TIMEOUT_US;
> > + u32 nsw;
> > +
> > + /* Enabling Test Mode control for CMN Rest */
> > + xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_SET);
>
> This function writes to the global registers. Wouldn't this affect a lane that
> is already configured?

This function is only executed once, for the first PHY that is
initialized (see the caller, this is guarded with a mutex, so there's no
race condition).

> > +
> > + /* Set Test Mode reset */
> > + xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_EN);
> > +
> > + xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG18, 0x00);
> > + xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG19, L3_TM_OVERRIDE_NSW_CODE);
> > +
> > + /*
> > + * As a part of work around sequence for PMOS calibration fix,
> > + * we need to configure any lane ICM_CFG to valid protocol. This
> > + * will deassert the CMN_Resetn signal.
> > + */
> > + xpsgtr_lane_set_protocol(gtr_phy);
> > +
> > + /* Clear Test Mode reset */
> > + xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_SET);
> > +
> > + dev_dbg(gtr_dev->dev, "calibrating...\n");
> > +
> > + do {
> > + u32 reg = xpsgtr_read(gtr_dev, L3_CALIB_DONE_STATUS);
> > +
> > + if ((reg & L3_CALIB_DONE) == L3_CALIB_DONE)
> > + break;
> > +
> > + if (!--timeout) {
> > + dev_err(gtr_dev->dev, "calibration time out\n");
> > + return -ETIMEDOUT;
> > + }
> > +
> > + udelay(1);
> > + } while (timeout > 0);
> > +
> > + dev_dbg(gtr_dev->dev, "calibration done\n");
> > +
> > + /* Reading NMOS Register Code */
> > + nsw = xpsgtr_read(gtr_dev, L0_TXPMA_ST_3) & L0_DN_CALIB_CODE;
> > +
> > + /* Set Test Mode reset */
> > + xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_EN);
> > +
> > + /* Writing NMOS register values back [5:3] */
> > + xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG19, nsw >> L3_NSW_CALIB_SHIFT);
> > +
> > + /* Writing NMOS register value [2:0] */
> > + xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG18,
> > + ((nsw & L3_TM_CALIB_DIG19_NSW) << L3_NSW_SHIFT) |
> > + (1 << L3_NSW_PIPE_SHIFT));
> > +
> > + /* Clear Test Mode reset */
> > + xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_SET);
> > +
> > + return 0;
> > +}
> > +
> > +static int xpsgtr_phy_init(struct phy *phy)
> > +{
> > + struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
> > + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> > + int ret = 0;
> > +
> > + mutex_lock(&gtr_dev->gtr_mutex);
> > +
> > + /* Skip initialization if not required. */
> > + if (!xpsgtr_phy_init_required(gtr_phy))
> > + goto out;
> > +
> > + if (gtr_dev->tx_term_fix) {
> > + ret = xpsgtr_phy_tx_term_fix(gtr_phy);
> > + if (ret < 0)
> > + goto out;
> > +
> > + gtr_dev->tx_term_fix = false;
> > + }
> > +
> > + /* Enable coarse code saturation limiting logic. */
> > + xpsgtr_write_phy(gtr_phy, L0_TM_PLL_DIG_37, L0_TM_COARSE_CODE_LIMIT);
> > +
> > + /*
> > + * Configure the PLL, the lane protocol, and perform protocol-specific
> > + * initialization.
> > + */
> > + xpsgtr_configure_pll(gtr_phy);
> > + xpsgtr_lane_set_protocol(gtr_phy);
> > +
> > + switch (gtr_phy->protocol) {
> > + case ICM_PROTOCOL_DP:
> > + xpsgtr_phy_init_dp(gtr_phy);
> > + break;
> > +
> > + case ICM_PROTOCOL_SATA:
> > + xpsgtr_phy_init_sata(gtr_phy);
> > + break;
> > +
> > + case ICM_PROTOCOL_SGMII:
> > + xpsgtr_phy_init_sgmii(gtr_phy);
> > + break;
> > + }
> > +
> > +out:
> > + mutex_unlock(&gtr_dev->gtr_mutex);
> > + return ret;
> > +}
> > +
> > +static int xpsgtr_phy_exit(struct phy *phy)
> > +{
> > + struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
> > +
> > + gtr_phy->skip_phy_init = false;
> > +
> > + return 0;
> > +}
> > +
> > +static int xpsgtr_phy_power_on(struct phy *phy)
> > +{
> > + struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
> > + int ret = 0;
> > +
> > + /*
> > + * Wait for the PLL to lock. For DP, only wait on DP0 to avoid
> > + * cumulating waits for both lanes. The user is expected to initialize
> > + * lane 0 last.
> > + */
> > + if (gtr_phy->protocol != ICM_PROTOCOL_DP ||
> > + gtr_phy->type == XPSGTR_TYPE_DP_0)
> > + ret = xpsgtr_wait_pll_lock(phy);
> > +
> > + return ret;
> > +}
> > +
> > +static int xpsgtr_phy_configure(struct phy *phy, union phy_configure_opts *opts)
> > +{
> > + struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
> > +
> > + if (gtr_phy->protocol != ICM_PROTOCOL_DP)
> > + return 0;
> > +
> > + xpsgtr_phy_configure_dp(gtr_phy, opts->dp.pre[0], opts->dp.voltage[0]);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct phy_ops xpsgtr_phyops = {
> > + .init = xpsgtr_phy_init,
> > + .exit = xpsgtr_phy_exit,
> > + .power_on = xpsgtr_phy_power_on,
> > + .configure = xpsgtr_phy_configure,
> > + .owner = THIS_MODULE,
> > +};
> > +
> > +/* -----------------------------------------------------------------------------
> > + * OF Xlate Support
> > + */
> > +
> > +/* Set the lane type and protocol based on the PHY type and instance number. */
> > +static int xpsgtr_set_lane_type(struct xpsgtr_phy *gtr_phy, u8 phy_type,
> > + unsigned int phy_instance)
> > +{
> > + unsigned int num_phy_types;
> > + const int *phy_types;
> > +
> > + switch (phy_type) {
> > + case PHY_TYPE_SATA: {
> > + static const int types[] = {
> > + XPSGTR_TYPE_SATA_0,
> > + XPSGTR_TYPE_SATA_1,
> > + };
> > +
> > + phy_types = types;
> > + num_phy_types = ARRAY_SIZE(types);
> > + gtr_phy->protocol = ICM_PROTOCOL_SATA;
> > + break;
> > + }
> > + case PHY_TYPE_USB3: {
> > + static const int types[] = {
> > + XPSGTR_TYPE_USB0,
> > + XPSGTR_TYPE_USB1,
> > + };
> > +
> > + phy_types = types;
> > + num_phy_types = ARRAY_SIZE(types);
> > + gtr_phy->protocol = ICM_PROTOCOL_USB;
> > + break;
> > + }
> > + case PHY_TYPE_DP: {
> > + static const int types[] = {
> > + XPSGTR_TYPE_DP_0,
> > + XPSGTR_TYPE_DP_1,
> > + };
> > +
> > + phy_types = types;
> > + num_phy_types = ARRAY_SIZE(types);
> > + gtr_phy->protocol = ICM_PROTOCOL_DP;
> > + break;
> > + }
> > + case PHY_TYPE_PCIE: {
> > + static const int types[] = {
> > + XPSGTR_TYPE_PCIE_0,
> > + XPSGTR_TYPE_PCIE_1,
> > + XPSGTR_TYPE_PCIE_2,
> > + XPSGTR_TYPE_PCIE_3,
> > + };
> > +
> > + phy_types = types;
> > + num_phy_types = ARRAY_SIZE(types);
> > + gtr_phy->protocol = ICM_PROTOCOL_PCIE;
> > + break;
> > + }
> > + case PHY_TYPE_SGMII: {
> > + static const int types[] = {
> > + XPSGTR_TYPE_SGMII0,
> > + XPSGTR_TYPE_SGMII1,
> > + XPSGTR_TYPE_SGMII2,
> > + XPSGTR_TYPE_SGMII3,
> > + };
> > +
> > + phy_types = types;
> > + num_phy_types = ARRAY_SIZE(types);
> > + gtr_phy->protocol = ICM_PROTOCOL_SGMII;
> > + break;
> > + }
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + if (phy_instance >= num_phy_types)
> > + return -EINVAL;
> > +
> > + gtr_phy->type = phy_types[phy_instance];
> > + return 0;
> > +}
> > +
> > +/*
> > + * Valid combinations of controllers and lanes (Interconnect Matrix).
> > + */
> > +static const unsigned int icm_matrix[NUM_LANES][CONTROLLERS_PER_LANE] = {
> > + { XPSGTR_TYPE_PCIE_0, XPSGTR_TYPE_SATA_0, XPSGTR_TYPE_USB0,
> > + XPSGTR_TYPE_DP_1, XPSGTR_TYPE_SGMII0 },
> > + { XPSGTR_TYPE_PCIE_1, XPSGTR_TYPE_SATA_1, XPSGTR_TYPE_USB0,
> > + XPSGTR_TYPE_DP_0, XPSGTR_TYPE_SGMII1 },
> > + { XPSGTR_TYPE_PCIE_2, XPSGTR_TYPE_SATA_0, XPSGTR_TYPE_USB0,
> > + XPSGTR_TYPE_DP_1, XPSGTR_TYPE_SGMII2 },
> > + { XPSGTR_TYPE_PCIE_3, XPSGTR_TYPE_SATA_1, XPSGTR_TYPE_USB1,
> > + XPSGTR_TYPE_DP_0, XPSGTR_TYPE_SGMII3 }
> > +};
> > +
> > +/* Translate OF phandle and args to PHY instance. */
> > +static struct phy *xpsgtr_xlate(struct device *dev,
> > + struct of_phandle_args *args)
> > +{
> > + struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev);
> > + struct xpsgtr_phy *gtr_phy;
> > + unsigned int phy_instance;
> > + unsigned int phy_lane;
> > + unsigned int phy_type;
> > + unsigned int refclk;
> > + unsigned int i;
> > + int ret;
> > +
> > + if (args->args_count != 4) {
> > + dev_err(dev, "Invalid number of cells in 'phy' property\n");
> > + return ERR_PTR(-EINVAL);
> > + }
> > +
> > + /*
> > + * Get the PHY parameters from the OF arguments and derive the lane
> > + * type.
> > + */
> > + phy_lane = args->args[0];
> > + if (phy_lane >= ARRAY_SIZE(gtr_dev->phys)) {
> > + dev_err(dev, "Invalid lane number %u\n", phy_lane);
> > + return ERR_PTR(-ENODEV);
> > + }
> > +
> > + gtr_phy = &gtr_dev->phys[phy_lane];
> > + phy_type = args->args[1];
> > + phy_instance = args->args[2];
> > +
> > + ret = xpsgtr_set_lane_type(gtr_phy, phy_type, phy_instance);
> > + if (ret < 0) {
> > + dev_err(gtr_dev->dev, "Invalid PHY type and/or instance\n");
> > + return ERR_PTR(ret);
> > + }
> > +
> > + refclk = args->args[3];
> > + if (refclk >= ARRAY_SIZE(gtr_dev->refclk_sscs) ||
> > + !gtr_dev->refclk_sscs[refclk]) {
> > + dev_err(dev, "Invalid reference clock number %u\n", refclk);
> > + return ERR_PTR(-EINVAL);
> > + }
> > +
> > + gtr_phy->refclk = refclk;
> > +
> > + /*
> > + * Ensure that the Interconnect Matrix is obeyed, i.e a given lane type
> > + * is allowed to operate on the lane.
> > + */
> > + for (i = 0; i < CONTROLLERS_PER_LANE; i++) {
> > + if (icm_matrix[phy_lane][i] == gtr_phy->type)
> > + return gtr_phy->phy;
> > + }
> > +
> > + return ERR_PTR(-EINVAL);
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Power Management
> > + */
> > +
> > +#ifdef CONFIG_PM
> > +static int xpsgtr_suspend(struct device *dev)
> > +{
> > + struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev);
> > +
> > + /* Save the snapshot ICM_CFG registers. */
> > + gtr_dev->saved_icm_cfg0 = xpsgtr_read(gtr_dev, ICM_CFG0);
> > + gtr_dev->saved_icm_cfg1 = xpsgtr_read(gtr_dev, ICM_CFG1);
> > +
> > + return 0;
> > +}
> > +
> > +static int xpsgtr_resume(struct device *dev)
> > +{
> > + struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev);
> > + unsigned int icm_cfg0, icm_cfg1;
> > + unsigned int i;
> > + bool skip_phy_init;
> > +
> > + icm_cfg0 = xpsgtr_read(gtr_dev, ICM_CFG0);
> > + icm_cfg1 = xpsgtr_read(gtr_dev, ICM_CFG1);
> > +
> > + /* Return if no GT lanes got configured before suspend. */
> > + if (!gtr_dev->saved_icm_cfg0 && !gtr_dev->saved_icm_cfg1)
> > + return 0;
> > +
> > + /* Check if the ICM configurations changed after suspend. */
> > + if (icm_cfg0 == gtr_dev->saved_icm_cfg0 &&
> > + icm_cfg1 == gtr_dev->saved_icm_cfg1)
> > + skip_phy_init = true;
> > + else
> > + skip_phy_init = false;
> > +
> > + /* Update the skip_phy_init for all gtr_phy instances. */
> > + for (i = 0; i < ARRAY_SIZE(gtr_dev->phys); i++)
> > + gtr_dev->phys[i].skip_phy_init = skip_phy_init;
> > +
> > + return 0;
> > +}
> > +#endif /* CONFIG_PM */
> > +
> > +static const struct dev_pm_ops xpsgtr_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(xpsgtr_suspend, xpsgtr_resume)
> > +};
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Probe & Platform Driver
> > + */
> > +
> > +static int xpsgtr_get_ref_clocks(struct xpsgtr_dev *gtr_dev)
> > +{
> > + unsigned int refclk;
> > +
> > + for (refclk = 0; refclk < ARRAY_SIZE(gtr_dev->refclk_sscs); ++refclk) {
> > + unsigned long rate;
> > + unsigned int i;
> > + struct clk *clk;
> > + char name[8];
> > +
> > + snprintf(name, sizeof(name), "ref%u", refclk);
> > + clk = devm_clk_get_optional(gtr_dev->dev, name);
> > + if (IS_ERR(clk)) {
> > + if (PTR_ERR(clk) != -EPROBE_DEFER)
> > + dev_err(gtr_dev->dev,
> > + "Failed to get reference clock %u: %ld\n",
> > + refclk, PTR_ERR(clk));
> > + return PTR_ERR(clk);
> > + }
> > +
> > + if (!clk)
> > + continue;
> > +
> > + /*
> > + * Get the spread spectrum (SSC) settings for the reference
> > + * clock rate.
> > + */
> > + rate = clk_get_rate(clk);
> > +
> > + for (i = 0 ; i < ARRAY_SIZE(ssc_lookup); i++) {
> > + if (rate == ssc_lookup[i].refclk_rate) {
> > + gtr_dev->refclk_sscs[refclk] = &ssc_lookup[i];
> > + break;
> > + }
> > + }
> > +
> > + if (i == ARRAY_SIZE(ssc_lookup)) {
> > + dev_err(gtr_dev->dev,
> > + "Invalid rate %lu for reference clock %u\n",
> > + rate, refclk);
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int xpsgtr_probe(struct platform_device *pdev)
> > +{
> > + struct device_node *np = pdev->dev.of_node;
> > + struct xpsgtr_dev *gtr_dev;
> > + struct phy_provider *provider;
> > + unsigned int port;
> > + int ret;
> > +
> > + gtr_dev = devm_kzalloc(&pdev->dev, sizeof(*gtr_dev), GFP_KERNEL);
> > + if (!gtr_dev)
> > + return -ENOMEM;
> > +
> > + gtr_dev->dev = &pdev->dev;
> > + platform_set_drvdata(pdev, gtr_dev);
> > +
> > + mutex_init(&gtr_dev->gtr_mutex);
> > +
> > + if (of_device_is_compatible(np, "xlnx,zynqmp-psgtr"))
> > + gtr_dev->tx_term_fix =
> > + of_property_read_bool(np, "xlnx,tx-termination-fix");
> > +
> > + /* Acquire resources. */
> > + gtr_dev->serdes = devm_platform_ioremap_resource_byname(pdev, "serdes");
> > + if (IS_ERR(gtr_dev->serdes))
> > + return PTR_ERR(gtr_dev->serdes);
> > +
> > + gtr_dev->siou = devm_platform_ioremap_resource_byname(pdev, "siou");
> > + if (IS_ERR(gtr_dev->siou))
> > + return PTR_ERR(gtr_dev->siou);
> > +
> > + ret = xpsgtr_get_ref_clocks(gtr_dev);
> > + if (ret)
> > + return ret;
> > +
> > + /* Create PHYs. */
> > + for (port = 0; port < ARRAY_SIZE(gtr_dev->phys); ++port) {
> > + struct xpsgtr_phy *gtr_phy = &gtr_dev->phys[port];
> > + struct phy *phy;
> > +
> > + gtr_phy->lane = port;
> > + gtr_phy->dev = gtr_dev;
> > +
> > + phy = devm_phy_create(&pdev->dev, np, &xpsgtr_phyops);
> > + if (IS_ERR(phy)) {
> > + dev_err(&pdev->dev, "failed to create PHY\n");
> > + return PTR_ERR(phy);
> > + }
> > +
> > + gtr_phy->phy = phy;
> > + phy_set_drvdata(phy, gtr_phy);
> > + }
> > +
> > + /* Register the PHY provider. */
> > + provider = devm_of_phy_provider_register(&pdev->dev, xpsgtr_xlate);
> > + if (IS_ERR(provider)) {
> > + dev_err(&pdev->dev, "registering provider failed\n");
> > + return PTR_ERR(provider);
>
> wrong indentation.

Oops. Will fix.

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2020-05-08 02:54    [W:0.117 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site