lkml.org 
[lkml]   [2020]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/4] arm64: dts: rockchip: Add RGA support to the PX30
From
Date
Hi Paul,

On 5/7/20 10:25 PM, Paul Kocialkowski wrote:
> Hi,
>
> On Fri 01 May 20, 00:05, Johan Jonker wrote:
>> Hi Paul,
>>
>>> The PX30 features a RGA block: add the necessary node to support it.
>>>
>>> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
>>> ---
>>> arch/arm64/boot/dts/rockchip/px30.dtsi | 11 +++++++++++
>>> 1 file changed, 11 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
>>> index f809dd6d5dc3..3de70aa4f1ce 100644
>>> --- a/arch/arm64/boot/dts/rockchip/px30.dtsi
>>> +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
>>> @@ -1102,6 +1102,17 @@ vopl_mmu: iommu@ff470f00 {
>>> status = "disabled";
>>> };
>>>
>>> + rga: rga@ff480000 {
>>> + compatible = "rockchip,px30-rga", "rockchip,rk3288-rga";
>>> + reg = <0x0 0xff480000 0x0 0x10000>;
>>> + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
>>> + clock-names = "aclk", "hclk", "sclk";
>>
>>> + resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>;
>>> + reset-names = "core", "axi", "ahb";
>>> + power-domains = <&power PX30_PD_VO>;
>>
>> sort
>>
>> power-domains = <&power PX30_PD_VO>;
>> resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>;
>> reset-names = "core", "axi", "ahb";
>
> What's the rationale behind this (besides alphabetic sorting, which I don't
> believe is a rule for dt properties)? Some nodes above in the file have it in
> the same order that I do, and I like to see clocks followed by resets.

My short list.
There is no hard rule... It mostly depend on Heiko...

For nodes:
If exists on top: model, compatible and chosen.
Sort things without reg alphabetical first,
then sort the rest by reg address.

Inside nodes:
If exists on top: compatible, reg and interrupts.
In alphabetical order the required properties.
Then in alphabetical order the other properties.
And as last things that start with '#' in alphabetical order.
Add status below all other properties for soc internal components with
any board-specifics.
Keep an empty line between properties and nodes.

Exceptions:
Sort pinctrl-0 above pinctrl-names, so it stays in line with clock-names
and dma-names.
Sort simple-audio-card,name above other simple-audio-card properties.
Sort regulator-name above other regulator properties.
Sort regulator-min-microvolt above regulator-max-microvolt.

>
> Cheers,
>
> Paul
>
>>
>>
>>> + };
>>> +
>>> qos_gmac: qos@ff518000 {
>>> compatible = "syscon";
>>> reg = <0x0 0xff518000 0x0 0x20>;
>>> --
>>> 2.26.0
>>
>

\
 
 \ /
  Last update: 2020-05-08 01:41    [W:0.056 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site