lkml.org 
[lkml]   [2020]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH next] ARM: dts: am437x: fix networking on boards with ksz9031 phy
Hi Grygorii,

thank you for you patches!

On Wed, May 06, 2020 at 10:08:35PM +0300, Grygorii Strashko wrote:
> Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
> KSZ9031 PHY") the networking is broken on boards:
> am437x-gp-evm
> am437x-sk-evm
> am437x-idk-evm
>
> All above boards have phy-mode = "rgmii" and this is worked before, because
> KSZ9031 PHY started with default RGMII internal delays configuration (TX
> off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the
> KSZ9031 PHY starts handling phy mode properly and disables RX delay, as
> result networking is become broken.
>
> Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
> behavior.
>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Philippe Schenker <philippe.schenker@toradex.com>
> Fixes: commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> ---
> arch/arm/boot/dts/am437x-gp-evm.dts | 2 +-
> arch/arm/boot/dts/am437x-idk-evm.dts | 2 +-
> arch/arm/boot/dts/am437x-sk-evm.dts | 4 ++--
> 3 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
> index 811c8cae315b..d692e3b2812a 100644
> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
> @@ -943,7 +943,7 @@
>
> &cpsw_emac0 {
> phy-handle = <&ethphy0>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-rxid";
> };
>
> &elm {
> diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
> index 9f66f96d09c9..a7495fb364bf 100644
> --- a/arch/arm/boot/dts/am437x-idk-evm.dts
> +++ b/arch/arm/boot/dts/am437x-idk-evm.dts
> @@ -504,7 +504,7 @@
>
> &cpsw_emac0 {
> phy-handle = <&ethphy0>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-id";
> };

Do you have here really rgmii-id?


> &rtc {
> diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
> index 25222497f828..4d5a7ca2e25d 100644
> --- a/arch/arm/boot/dts/am437x-sk-evm.dts
> +++ b/arch/arm/boot/dts/am437x-sk-evm.dts
> @@ -833,13 +833,13 @@
>
> &cpsw_emac0 {
> phy-handle = <&ethphy0>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-rxid";
> dual_emac_res_vlan = <1>;
> };
>
> &cpsw_emac1 {
> phy-handle = <&ethphy1>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-rxid";
> dual_emac_res_vlan = <2>;
> };
>
> --
> 2.17.1

Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-05-07 06:42    [W:0.090 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site