lkml.org 
[lkml]   [2020]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] hwmon: (occ) Add new temperature sensor type
On Fri, May 01, 2020 at 10:08:33AM -0500, Eddie James wrote:
> The latest version of the On-Chip Controller (OCC) has a different
> format for the temperature sensor data. Add a new temperature sensor
> version to handle this data.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>

For my reference:

Acked-by: Guenter Roeck <linux@roeck-us.net>

I assume this depends on at least patch 2 of the series, so we'll have
to wait for that to be accepted.

Guenter

> ---
> drivers/hwmon/occ/common.c | 75 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 75 insertions(+)
>
> diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c
> index 30e18eb60da7..52af0e728232 100644
> --- a/drivers/hwmon/occ/common.c
> +++ b/drivers/hwmon/occ/common.c
> @@ -41,6 +41,14 @@ struct temp_sensor_2 {
> u8 value;
> } __packed;
>
> +struct temp_sensor_10 {
> + u32 sensor_id;
> + u8 fru_type;
> + u8 value;
> + u8 throttle;
> + u8 reserved;
> +} __packed;
> +
> struct freq_sensor_1 {
> u16 sensor_id;
> u16 value;
> @@ -307,6 +315,60 @@ static ssize_t occ_show_temp_2(struct device *dev,
> return snprintf(buf, PAGE_SIZE - 1, "%u\n", val);
> }
>
> +static ssize_t occ_show_temp_10(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + int rc;
> + u32 val = 0;
> + struct temp_sensor_10 *temp;
> + struct occ *occ = dev_get_drvdata(dev);
> + struct occ_sensors *sensors = &occ->sensors;
> + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> +
> + rc = occ_update_response(occ);
> + if (rc)
> + return rc;
> +
> + temp = ((struct temp_sensor_10 *)sensors->temp.data) + sattr->index;
> +
> + switch (sattr->nr) {
> + case 0:
> + val = get_unaligned_be32(&temp->sensor_id);
> + break;
> + case 1:
> + val = temp->value;
> + if (val == OCC_TEMP_SENSOR_FAULT)
> + return -EREMOTEIO;
> +
> + /*
> + * VRM doesn't return temperature, only alarm bit. This
> + * attribute maps to tempX_alarm instead of tempX_input for
> + * VRM
> + */
> + if (temp->fru_type != OCC_FRU_TYPE_VRM) {
> + /* sensor not ready */
> + if (val == 0)
> + return -EAGAIN;
> +
> + val *= 1000;
> + }
> + break;
> + case 2:
> + val = temp->fru_type;
> + break;
> + case 3:
> + val = temp->value == OCC_TEMP_SENSOR_FAULT;
> + break;
> + case 4:
> + val = temp->throttle * 1000;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return snprintf(buf, PAGE_SIZE - 1, "%u\n", val);
> +}
> +
> static ssize_t occ_show_freq_1(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> @@ -745,6 +807,10 @@ static int occ_setup_sensor_attrs(struct occ *occ)
> num_attrs += (sensors->temp.num_sensors * 4);
> show_temp = occ_show_temp_2;
> break;
> + case 0x10:
> + num_attrs += (sensors->temp.num_sensors * 5);
> + show_temp = occ_show_temp_10;
> + break;
> default:
> sensors->temp.num_sensors = 0;
> }
> @@ -844,6 +910,15 @@ static int occ_setup_sensor_attrs(struct occ *occ)
> attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
> show_temp, NULL, 3, i);
> attr++;
> +
> + if (sensors->temp.version == 0x10) {
> + snprintf(attr->name, sizeof(attr->name),
> + "temp%d_max", s);
> + attr->sensor = OCC_INIT_ATTR(attr->name, 0444,
> + show_temp, NULL,
> + 4, i);
> + attr++;
> + }
> }
> }
>

\
 
 \ /
  Last update: 2020-05-06 17:57    [W:0.085 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site