lkml.org 
[lkml]   [2020]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 46/91] perf intel-pt: Update documentation about itrace G and L options
Date
From: Adrian Hunter <adrian.hunter@intel.com>

Provide a little more information about the new G and L options,
particularly the issue with large PEBs.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200429150751.12570-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/Documentation/itrace.txt | 4 +++
tools/perf/Documentation/perf-intel-pt.txt | 35 ++++++++++++++++++++++
2 files changed, 39 insertions(+)

diff --git a/tools/perf/Documentation/itrace.txt b/tools/perf/Documentation/itrace.txt
index 0326050beebd..271484754fee 100644
--- a/tools/perf/Documentation/itrace.txt
+++ b/tools/perf/Documentation/itrace.txt
@@ -33,6 +33,10 @@
Also the number of last branch entries (default 64, max. 1024) for
instructions or transactions events can be specified.

+ Similar to options g and l, size may also be specified for options G and L.
+ On x86, note that G and L work poorly when data has been recorded with
+ large PEBS. Refer linkperf:perf-intel-pt[1] man page for details.
+
It is also possible to skip events generated (instructions, branches, transactions,
ptwrite, power) at the beginning. This is useful to ignore initialization code.

diff --git a/tools/perf/Documentation/perf-intel-pt.txt b/tools/perf/Documentation/perf-intel-pt.txt
index 456fdcbf26ac..782eb8a65caf 100644
--- a/tools/perf/Documentation/perf-intel-pt.txt
+++ b/tools/perf/Documentation/perf-intel-pt.txt
@@ -821,7 +821,9 @@ The letters are:
e synthesize tracing error events
d create a debug log
g synthesize a call chain (use with i or x)
+ G synthesize a call chain on existing event records
l synthesize last branch entries (use with i or x)
+ L synthesize last branch entries on existing event records
s skip initial number of events

"Instructions" events look like they were recorded by "perf record -e
@@ -912,6 +914,39 @@ transactions events can be specified. e.g.
Note that last branch entries are cleared for each sample, so there is no overlap
from one sample to the next.

+The G and L options are designed in particular for sample mode, and work much
+like g and l but add call chain and branch stack to the other selected events
+instead of synthesized events. For example, to record branch-misses events for
+'ls' and then add a call chain derived from the Intel PT trace:
+
+ perf record --aux-sample -e '{intel_pt//u,branch-misses:u}' -- ls
+ perf report --itrace=Ge
+
+Although in fact G is a default for perf report, so that is the same as just:
+
+ perf report
+
+One caveat with the G and L options is that they work poorly with "Large PEBS".
+Large PEBS means PEBS records will be accumulated by hardware and the written
+into the event buffer in one go. That reduces interrupts, but can give very
+late timestamps. Because the Intel PT trace is synchronized by timestamps,
+the PEBS events do not match the trace. Currently, Large PEBS is used only in
+certain circumstances:
+ - hardware supports it
+ - PEBS is used
+ - event period is specified, instead of frequency
+ - the sample type is limited to the following flags:
+ PERF_SAMPLE_IP | PERF_SAMPLE_TID | PERF_SAMPLE_ADDR |
+ PERF_SAMPLE_ID | PERF_SAMPLE_CPU | PERF_SAMPLE_STREAM_ID |
+ PERF_SAMPLE_DATA_SRC | PERF_SAMPLE_IDENTIFIER |
+ PERF_SAMPLE_TRANSACTION | PERF_SAMPLE_PHYS_ADDR |
+ PERF_SAMPLE_REGS_INTR | PERF_SAMPLE_REGS_USER |
+ PERF_SAMPLE_PERIOD (and sometimes) | PERF_SAMPLE_TIME
+Because Intel PT sample mode uses a different sample type to the list above,
+Large PEBS is not used with Intel PT sample mode. To avoid Large PEBS in other
+cases, avoid specifying the event period i.e. avoid the 'perf record' -c option,
+--count option, or 'period' config term.
+
To disable trace decoding entirely, use the option --no-itrace.

It is also possible to skip events generated (instructions, branches, transactions)
--
2.21.1
\
 
 \ /
  Last update: 2020-05-06 17:26    [W:0.223 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site