lkml.org 
[lkml]   [2020]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V1 1/2] mmc: sdhci: Introduce new quirk to use reserved timeout
Date
Introduce a new quirk for letting vendor drivers to use reserved
timeout value (0xF) in timeout control register.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
---
drivers/mmc/host/sdhci.c | 3 ++-
drivers/mmc/host/sdhci.h | 5 +++++
2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 1bb6b67..07528a9 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -967,7 +967,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd,
}

if (count >= 0xF) {
- if (!(host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT))
+ if (!(host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT) ||
+ !(host->quirks2 & SDHCI_QUIRK2_USE_RESERVED_MAX_TIMEOUT))
DBG("Too large timeout 0x%x requested for CMD%d!\n",
count, cmd->opcode);
count = 0xE;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 8d2a096..02f8779 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -476,6 +476,11 @@ struct sdhci_host {
* block count.
*/
#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18)
+/*
+ * Some controllers define the usage of 0xF in data timeout counter
+ * register (0x2E) which is actually a reserved bit as per specification.
+ */
+#define SDHCI_QUIRK2_USE_RESERVED_MAX_TIMEOUT (1<<19)

int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
2.7.4
\
 
 \ /
  Last update: 2020-05-06 15:54    [W:0.058 / U:2.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site