lkml.org 
[lkml]   [2020]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] media: dt-bindings: media: xilinx: Add Xilinx UHD-SDI Receiver Subsystem
Hi Vishal,

Thank you for the patch.

On Wed, Apr 29, 2020 at 07:47:03PM +0530, Vishal Sagar wrote:
> Add bindings documentation for Xilinx UHD-SDI Receiver Subsystem.
>
> The Xilinx UHD-SDI Receiver Subsystem consists of SMPTE UHD-SDI (RX) IP
> core, an SDI RX to Video Bridge IP core to convert SDI video to native
> video and a Video In to AXI4-Stream IP core to convert native video to
> AXI4-Stream.
>
> Signed-off-by: Vishal Sagar <vishal.sagar@xilinx.com>
> ---
> v2
> - Removed references to xlnx,video*
> - Fixed as per Sakari Ailus and Rob Herring's comments
> - Converted to yaml format
>
> .../bindings/media/xilinx/xlnx,sdirxss.yaml | 132 ++++++++++++++++++
> 1 file changed, 132 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/xilinx/xlnx,sdirxss.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,sdirxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,sdirxss.yaml
> new file mode 100644
> index 000000000000..9133ad19df55
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,sdirxss.yaml
> @@ -0,0 +1,132 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/xilinx/xlnx,sdirxss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +
> +title: Xilinx SMPTE UHD-SDI Receiver Subsystem
> +
> +maintainers:
> + - Vishal Sagar <vishal.sagar@xilinx.com>
> +
> +description: |
> + The SMPTE UHD-SDI Receiver (RX) Subsystem allows you to quickly create systems
> + based on SMPTE SDI protocols. It receives unaligned native SDI streams from
> + the SDI GT PHY and outputs an AXI4-Stream video stream, native video, or
> + native SDI using Xilinx transceivers as the physical layer.
> +
> + The subsystem consists of
> + 1 - SMPTE UHD-SDI Rx
> + 2 - SDI Rx to Native Video Bridge
> + 3 - Video In to AXI4-Stream Bridge
> +
> + The subsystem can capture SDI streams in upto 12G mode 8 data streams and output

s/upto/up to/

> + a dual pixel per clock RGB/YUV444,422/420 10/12 bits per component AXI4-Stream.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - xlnx,v-smpte-uhdsdi-rx-ss-2.0
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + description: List of clock specifiers
> + items:
> + - description: AXI4-Lite clock
> + - description: SMPTE UHD-SDI Rx core clock
> + - description: Video clock
> +
> + clock-names:
> + items:
> + - const: s_axi_aclk
> + - const: sdi_rx_clk
> + - const: video_out_clk
> +
> + xlnx,bpp:
> + description: Bits per pixel supported. Can be 10 or 12 bits per pixel only.
> + allOf:
> + - $ref: "/schemas/types.yaml#/definitions/uint32"
> + - enum: [10, 12]

I don't see this as a design parameter in the documentation (pg290,
v2.0). What does it correspond to ? All the BPC mentions in the
documentation always state that 10-bit is the only supported value.

> +
> + xlnx,line-rate:
> + description: |
> + The maximum mode supported by the design. Possible values are as below
> + 12G_SDI_8DS - 12G mode with 8 data streams
> + 6G_SDI - 6G mode
> + 3G_SDI - 3G mode
> + enum:
> + - 12G_SDI_8DS
> + - 6G_SDI
> + - 3G_SDI

How about making this an integer property, with #define in
include/dt-bindings/media/xilinx-sdi.h ? As far as I understand, the SDI
TX subsystem has the same parameter, so the #define could be shared
between the two.

> +
> + xlnx,include-edh:
> + type: boolean
> + description: |
> + This is present when the Error Detection and Handling processor is
> + enabled in design.
> +
> + ports:
> + type: object
> + description: |
> + Generally the SDI port is connected to a device like SDI Broadcast camera
> + which is independently controlled. Hence port@0 is a source port which can be
> + connected to downstream IP which can work with AXI4 Stream data.

We should still have an input port. It can be connected to a DT node for
a physical SDI connector, or any other component in the platform (I
expect the former to be the common case). There are DT bindings for
connectors in Documentation/devicetree/bindings/display/connector/, we
should add one for SDI.

> + properties:
> + port@0:
> + type: object
> + description: Source port
> + properties:
> + reg:
> + const: 0
> + endpoint:
> + type: object
> + properties:
> + remote-endpoint: true
> + required:
> + - remote-endpoint
> + additionalProperties: false
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - xlnx,line-rate
> + - xlnx,bpp
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + uhdsdirxss: v-smpte-uhdsdi-rxss@80000000 {
> + compatible = "xlnx,v-smpte-uhdsdi-rx-ss-2.0";
> + interrupt-parent = <&gic>;
> + interrupts = <0 89 4>;
> + reg = <0x0 0x80000000 0x0 0x10000>;
> + xlnx,include-edh;
> + xlnx,line-rate = "12G_SDI_8DS";
> + clocks = <&clk_1>, <&si570_1>, <&clk_2>;
> + clock-names = "s_axi_aclk", "sdi_rx_clk", "video_out_clk";
> + xlnx,bpp = <10>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + sdirx_out: endpoint {
> + remote-endpoint = <&vcap_sdirx_in>;
> + };
> + };
> + };
> + };

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2020-05-06 15:03    [W:0.229 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site