lkml.org 
[lkml]   [2020]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/5] iio: accel: Add bma023 support to bma180
On Sun, May 3, 2020 at 7:22 PM Jonathan Bakker <xc-racer2@live.ca> wrote:

> This patchset adds support for the bma023 three axis accelerometer
> to the bma180 IIO driver. The bma023 is found on several ~2010
> phones, including the first-gen Galaxy S series.
>
> The bma023 differs from later chips (bma180, bma25x) in that it
> has no low power but still working mode and no temperature
> channel.
>
> The bma023 is already supported by a misc input driver (bma150), so
> when both are enabled, the iio driver is preferred. The bma150
> is very similar to the bma023, but has a temperature channel.
> Support for the bma150 is not added in this patchset.

I'd say, if it's not too much trouble please also patch in
support for BMA150 and SMB380 to the IIO driver so
we can delete this old Input driver, we have done this
before and thes "input drivers" are just causing headaches
and wasting time for the Input maintainer.

It can be in a separate patch set from this one if you
don't want to get stuck on this.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2020-05-06 14:47    [W:0.050 / U:1.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site