lkml.org 
[lkml]   [2020]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [patch V4 part 2 18/18] x86/kvm/svm: Move guest enter/exit into .noinstr.text
From
Date
On 05/05/20 15:41, Thomas Gleixner wrote:
> Move the functions which are inside the RCU off region into the
> non-instrumentable text section.
>
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Sean Christopherson <sean.j.christopherson@intel.com>
> ---
> arch/x86/kvm/svm/svm.c | 102 ++++++++++++++++++++++++---------------------
> arch/x86/kvm/svm/vmenter.S | 2
> 2 files changed, 57 insertions(+), 47 deletions(-)
>
> --- a/arch/x86/kvm/svm/svm.c
> +++ b/arch/x86/kvm/svm/svm.c
> @@ -3278,6 +3278,61 @@ static void svm_cancel_injection(struct
>
> void __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
>
> +static noinstr void svm_vcpu_enter_exit(struct kvm_vcpu *vcpu,
> + struct vcpu_svm *svm)
> +{
> + /*
> + * VMENTER enables interrupts (host state), but the kernel state is
> + * interrupts disabled when this is invoked. Also tell RCU about
> + * it. This is the same logic as for exit_to_user_mode().
> + *
> + * 1) Trace interrupts on state
> + * 2) Prepare lockdep with RCU on
> + * 3) Invoke context tracking if enabled to adjust RCU state
> + * 4) Tell lockdep that interrupts are enabled
> + *
> + * This has to be after x86_spec_ctrl_set_guest() because that can
> + * take locks (lockdep needs RCU) and calls into world and some
> + * more.
> + */
> + instr_begin();
> + trace_hardirqs_on_prepare();
> + lockdep_hardirqs_on_prepare(CALLER_ADDR0);
> + instr_end();
> + guest_enter_irqoff();
> + lockdep_hardirqs_on(CALLER_ADDR0);
> +
> + __svm_vcpu_run(svm->vmcb_pa, (unsigned long *)&svm->vcpu.arch.regs);
> +
> +#ifdef CONFIG_X86_64
> + native_wrmsrl(MSR_GS_BASE, svm->host.gs_base);
> +#else
> + loadsegment(fs, svm->host.fs);
> +#ifndef CONFIG_X86_32_LAZY_GS
> + loadsegment(gs, svm->host.gs);
> +#endif
> +#endif
> +
> + /*
> + * VMEXIT disables interrupts (host state, see the CLI in the ASM
> + * above), but tracing and lockdep have them in state 'on'. Same as
> + * enter_from_user_mode().
> + *
> + * 1) Tell lockdep that interrupts are disabled
> + * 2) Invoke context tracking if enabled to reactivate RCU
> + * 3) Trace interrupts off state
> + *
> + * This needs to be done before the below as native_read_msr()
> + * contains a tracepoint and x86_spec_ctrl_restore_host() calls
> + * into world and some more.
> + */
> + lockdep_hardirqs_off(CALLER_ADDR0);
> + guest_exit_irqoff();
> + instr_begin();
> + trace_hardirqs_off_prepare();
> + instr_end();
> +}
> +
> static void svm_vcpu_run(struct kvm_vcpu *vcpu)
> {
> struct vcpu_svm *svm = to_svm(vcpu);
> @@ -3330,52 +3385,7 @@ static void svm_vcpu_run(struct kvm_vcpu
> */
> x86_spec_ctrl_set_guest(svm->spec_ctrl, svm->virt_spec_ctrl);
>
> - /*
> - * VMENTER enables interrupts (host state), but the kernel state is
> - * interrupts disabled when this is invoked. Also tell RCU about
> - * it. This is the same logic as for exit_to_user_mode().
> - *
> - * 1) Trace interrupts on state
> - * 2) Prepare lockdep with RCU on
> - * 3) Invoke context tracking if enabled to adjust RCU state
> - * 4) Tell lockdep that interrupts are enabled
> - *
> - * This has to be after x86_spec_ctrl_set_guest() because that can
> - * take locks (lockdep needs RCU) and calls into world and some
> - * more.
> - */
> - trace_hardirqs_on_prepare();
> - lockdep_hardirqs_on_prepare(CALLER_ADDR0);
> - guest_enter_irqoff();
> - lockdep_hardirqs_on(CALLER_ADDR0);
> -
> - __svm_vcpu_run(svm->vmcb_pa, (unsigned long *)&svm->vcpu.arch.regs);
> -
> -#ifdef CONFIG_X86_64
> - wrmsrl(MSR_GS_BASE, svm->host.gs_base);
> -#else
> - loadsegment(fs, svm->host.fs);
> -#ifndef CONFIG_X86_32_LAZY_GS
> - loadsegment(gs, svm->host.gs);
> -#endif
> -#endif
> -
> - /*
> - * VMEXIT disables interrupts (host state, see the CLI in the ASM
> - * above), but tracing and lockdep have them in state 'on'. Same as
> - * enter_from_user_mode().
> - *
> - * 1) Tell lockdep that interrupts are disabled
> - * 2) Invoke context tracking if enabled to reactivate RCU
> - * 3) Trace interrupts off state
> - *
> - * This needs to be done before the below as native_read_msr()
> - * contains a tracepoint and x86_spec_ctrl_restore_host() calls
> - * into world and some more.
> - */
> - lockdep_hardirqs_off(CALLER_ADDR0);
> - guest_exit_irqoff();
> - trace_hardirqs_off_prepare();
> + svm_vcpu_enter_exit(vcpu, svm);
>
> /*
> * We do not use IBRS in the kernel. If this vCPU has used the
> --- a/arch/x86/kvm/svm/vmenter.S
> +++ b/arch/x86/kvm/svm/vmenter.S
> @@ -27,7 +27,7 @@
> #define VCPU_R15 __VCPU_REGS_R15 * WORD_SIZE
> #endif
>
> - .text
> +.section .noinstr.text, "ax"
>
> /**
> * __svm_vcpu_run - Run a vCPU via a transition to SVM guest mode
>

Acked-by: Paolo Bonzini <pbonzini@redhat.com>

\
 
 \ /
  Last update: 2020-05-06 10:18    [W:0.417 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site