lkml.org 
[lkml]   [2020]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] net: bpf: permit redirect from L3 to L2 devices at near max mtu
> I thought we have established that checking device MTU (m*T*u)
> at ingress makes a very limited amount of sense, no?
>
> Shooting from the hip here, but won't something like:
>
> if (!skb->dev || skb->tc_at_ingress)
> return SKB_MAX_ALLOC;
> return skb->dev->mtu + skb->dev->hard_header_len;
>
> Solve your problem?

I believe that probably does indeed solve the ingress case of tc
ingress hook on cellular redirecting to wifi.

However, there's 2 possible uplinks - cellular (rawip, L3), and wifi
(ethernet, L2).
Thus, there's actually 4 things I'm trying to support:

- ipv6 ingress on cellular uplink (L3/rawip), translate to ipv4,
forward to wifi/ethernet <- need to add ethernet header

- ipv6 ingress on wifi uplink (L2/ether), translate to ipv4, forward
to wifi/ethernet <- trivial, no packet size change

- ipv4 egressing through tun (L3), translate to ipv6, forward to
cellular uplink <- trivial, no packet size change

- ipv4 egressing through tun (L3), translate to ipv6, forward to wifi
uplink <- need to add ethernet header [*]

I think your approach doesn't solve the reverse path (* up above):

ie. ipv4 packets hitting a tun device (owned by a clat daemon doing
ipv4<->ipv6 translation in userspace), being stolen by a tc egress
ebpf hook, mutated to ipv6 by ebpf and bpf_redirect'ed to egress
through a wifi ipv6-only uplink.

Though arguably in this case I could probably simply increase the tun
device mtu by another 14, while keeping ipv4 route mtus low...
(tun mtu already has to be 28 bytes lower then wifi mtu to allow
replacement of ipv4 with ipv6 header (20 bytes extra), with possibly
an ipv6 frag header (8 more bytes))

Any further thoughts?

\
 
 \ /
  Last update: 2020-05-07 02:48    [W:0.049 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site