lkml.org 
[lkml]   [2020]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next 1/7] dt-binding: ti: am65x: document common platform time sync cpts module
From
Date


On 06/05/2020 22:07, Rob Herring wrote:
> On Tue, May 5, 2020 at 10:01 AM Grygorii Strashko
> <grygorii.strashko@ti.com> wrote:
>>
>>
>>
>> On 05/05/2020 07:04, Rob Herring wrote:
>>> On Fri, May 01, 2020 at 11:50:05PM +0300, Grygorii Strashko wrote:
>>>> Document device tree bindings for TI AM654/J721E SoC The Common Platform
>>>> Time Sync (CPTS) module. The CPTS module is used to facilitate host control
>>>> of time sync operations. Main features of CPTS module are:
>>>> - selection of multiple external clock sources
>>>> - 64-bit timestamp mode in ns with ppm and nudge adjustment.
>>>> - control of time sync events via interrupt or polling
>>>> - hardware timestamp of ext. events (HWx_TS_PUSH)
>>>> - periodic generator function outputs (TS_GENFx)
>>>> - PPS in combination with timesync router
>>>> - Depending on integration it enables compliance with the IEEE 1588-2008
>>>> standard for a precision clock synchronization protocol, Ethernet Enhanced
>>>> Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time
>>>> Measurement (PTM).
>>>>
>>>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>>>> ---
>>>> .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 7 +
>>>> .../bindings/net/ti,k3-am654-cpts.yaml | 152 ++++++++++++++++++
>>>> 2 files changed, 159 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
>>>> index 78bf511e2892..0f3fde45e200 100644
>>>> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
>>>> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
>>>> @@ -144,6 +144,13 @@ patternProperties:
>>>> description:
>>>> CPSW MDIO bus.
>>>>
>>>> + "^cpts$":
>>
>> ok
>>
>>>
>>> Fixed strings go under 'properties'.
>>>
>>>> + type: object
>>>> + allOf:
>>>> + - $ref: "ti,am654-cpts.yaml#"
>>>> + description:
>>>> + CPSW Common Platform Time Sync (CPTS) module.
>>>> +
>>>> required:
>>>> - compatible
>>>> - reg
>>>> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
>>>> new file mode 100644
>>>> index 000000000000..1b535d41e5c6
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
>>>> @@ -0,0 +1,152 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/net/ti,am654-cpts.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module Device Tree Bindings
>>>> +
>>>> +maintainers:
>>>> + - Grygorii Strashko <grygorii.strashko@ti.com>
>>>> + - Sekhar Nori <nsekhar@ti.com>
>>>> +
>>>> +description: |+
>>>> + The TI AM654x/J721E CPTS module is used to facilitate host control of time
>>>> + sync operations.
>>>> + Main features of CPTS module are
>>>> + - selection of multiple external clock sources
>>>> + - Software control of time sync events via interrupt or polling
>>>> + - 64-bit timestamp mode in ns with PPM and nudge adjustment.
>>>> + - hardware timestamp push inputs (HWx_TS_PUSH)
>>>> + - timestamp counter compare output (TS_COMP)
>>>> + - timestamp counter bit output (TS_SYNC)
>>>> + - periodic Generator function outputs (TS_GENFx)
>>>> + - Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) (TSN)
>>>> + - external hardware timestamp push inputs (HWx_TS_PUSH) timestamping
>>>> +
>>>> + Depending on integration it enables compliance with the IEEE 1588-2008
>>>> + standard for a precision clock synchronization protocol, Ethernet Enhanced
>>>> + Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time
>>>> + Measurement (PTM).
>>>> +
>>>> + TI AM654x/J721E SoCs has several similar CPTS modules integrated into the
>>>> + different parts of the system which could be synchronized with each other
>>>> + - Main CPTS
>>>> + - MCU CPSW CPTS with IEEE 1588-2008 support
>>>> + - PCIe subsystem CPTS for PTM support
>>>> +
>>>> + Depending on CPTS module integration and when CPTS is integral part of
>>>> + another module (MCU CPSW for example) "compatible" and "reg" can
>>>> + be omitted - parent module is fully responsible for CPTS enabling and
>>>> + configuration.
>>>
>>> That's fine, but you should still have compatible and reg.
>>
>> I'll add reg as below. But compatible is an issue, because
>> k3-am654-cpsw-nuss call of_platform_populate() to create mdio device.
>> But for CPTS I do not want to create device as k3-am654-cpsw-nuss uses direct
>> function calls to CPTS.
>>
>> Will it be correct to switch to of_platform_device_create() instead of
>> of_platform_populate()?
>
> That should be fine I think.

Thanks. I've sent follow up patches.

--
Best regards,
grygorii

\
 
 \ /
  Last update: 2020-05-06 21:11    [W:1.513 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site