lkml.org 
[lkml]   [2020]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 3/3] drm/bridge: chrontel-ch7033: Add a new driver
From
Date
On 04/05/2020 22:06, Sam Ravnborg wrote:
> Hi Lubomir.
>
> Drivers looks good. I look forward to the day we have moved
> connector stuff to the displaydriver - this will simplify this driver
> even more.
>
> One Q in the following.
>
> Sam
>
> On Fri, Apr 24, 2020 at 11:35:39PM +0200, Lubomir Rintel wrote:
>> This is a driver for video encoder with VGA and DVI/HDMI outputs.
>>
>> There is no documentation for the chip -- the operation was guessed from
>> what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names
>> come from the ch7035 driver in Mediatek's GPL code dump.
>>
>> Only bare minimum is implemented -- no fancy stuff, such as scaling. That
>> would only worsen our misery. We don't load the firmware and we don't need
>> to even bother enabling the MCU. There are probably no distributable
>> firmware images anyway.
>>
>> Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60,
>> with VGA as well as DVI.
>>
>> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
>>
>> ---
>> Changes since v4:
>> - Removed the registration with the component framework and creation of
>> drm_encoder.
>>
>> Changes since v3:
>> - Cosmetic changes; drop ch7033_encoder_destroy() and use
>> drm_encoder_cleanup() for drm_encoder_funcs.destroy callback
>> directly.
>>
>> Changes since v1:
>> - Sort the includes
>> - Drop a useless model id read
>> - Chain to the bridge-connector instead of dealing with the HPD/EDID
>> readout machinery ourselves
>> - Utilize regmap to access the registers
>>
>> drivers/gpu/drm/bridge/Kconfig | 10 +
>> drivers/gpu/drm/bridge/Makefile | 1 +
>> drivers/gpu/drm/bridge/chrontel-ch7033.c | 620 +++++++++++++++++++++++
>> 3 files changed, 631 insertions(+)
>> create mode 100644 drivers/gpu/drm/bridge/chrontel-ch7033.c
>>
>> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
>> index aaed2347ace9..0ebc72d62a5b 100644
>> --- a/drivers/gpu/drm/bridge/Kconfig
>> +++ b/drivers/gpu/drm/bridge/Kconfig
>> @@ -27,6 +27,16 @@ config DRM_CDNS_DSI
>> Support Cadence DPI to DSI bridge. This is an internal
>> bridge and is meant to be directly embedded in a SoC.
>>
>> +config DRM_CHRONTEL_CH7033
>> + tristate "Chrontel CH7033 Video Encoder"
>> + depends on OF
>> + select DRM_KMS_HELPER
>> + help
>> + Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as
>> + found in the Dell Wyse 3020 thin client.
>> +
>> + If in doubt, say "N".
>> +
>> config DRM_DISPLAY_CONNECTOR
>> tristate "Display connector support"
>> depends on OF
>> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
>> index 6fb062b5b0f0..a844315feddb 100644
>> --- a/drivers/gpu/drm/bridge/Makefile
>> +++ b/drivers/gpu/drm/bridge/Makefile
>> @@ -1,5 +1,6 @@
>> # SPDX-License-Identifier: GPL-2.0
>> obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
>> +obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
>> obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o
>> obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
>> obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
>> diff --git a/drivers/gpu/drm/bridge/chrontel-ch7033.c b/drivers/gpu/drm/bridge/chrontel-ch7033.c
>> new file mode 100644
>> index 000000000000..f8675d82974b
>> --- /dev/null
>> +++ b/drivers/gpu/drm/bridge/chrontel-ch7033.c
>> @@ -0,0 +1,620 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Chrontel CH7033 Video Encoder Driver
>> + *
>> + * Copyright (C) 2019,2020 Lubomir Rintel
>> + */
>> +
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/module.h>
>> +#include <linux/regmap.h>
>> +
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_bridge.h>
>> +#include <drm/drm_edid.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_print.h>
>> +#include <drm/drm_probe_helper.h>
>> +
>> +/* Page 0, Register 0x07 */
>> +enum {
>> + DRI_PD = BIT(3),
>> + IO_PD = BIT(5),
>> +};
>> +
>> +/* Page 0, Register 0x08 */
>> +enum {
>> + DRI_PDDRI = GENMASK(7, 4),
>> + PDDAC = GENMASK(3, 1),
>> + PANEN = BIT(0),
>> +};
>> +
>> +/* Page 0, Register 0x09 */
>> +enum {
>> + DPD = BIT(7),
>> + GCKOFF = BIT(6),
>> + TV_BP = BIT(5),
>> + SCLPD = BIT(4),
>> + SDPD = BIT(3),
>> + VGA_PD = BIT(2),
>> + HDBKPD = BIT(1),
>> + HDMI_PD = BIT(0),
>> +};
>> +
>> +/* Page 0, Register 0x0a */
>> +enum {
>> + MEMINIT = BIT(7),
>> + MEMIDLE = BIT(6),
>> + MEMPD = BIT(5),
>> + STOP = BIT(4),
>> + LVDS_PD = BIT(3),
>> + HD_DVIB = BIT(2),
>> + HDCP_PD = BIT(1),
>> + MCU_PD = BIT(0),
>> +};
>> +
>> +/* Page 0, Register 0x18 */
>> +enum {
>> + IDF = GENMASK(7, 4),
>> + INTEN = BIT(3),
>> + SWAP = GENMASK(2, 0),
>> +};
>> +
>> +enum {
>> + BYTE_SWAP_RGB = 0,
>> + BYTE_SWAP_RBG = 1,
>> + BYTE_SWAP_GRB = 2,
>> + BYTE_SWAP_GBR = 3,
>> + BYTE_SWAP_BRG = 4,
>> + BYTE_SWAP_BGR = 5,
>> +};
>> +
>> +/* Page 0, Register 0x19 */
>> +enum {
>> + HPO_I = BIT(5),
>> + VPO_I = BIT(4),
>> + DEPO_I = BIT(3),
>> + CRYS_EN = BIT(2),
>> + GCLKFREQ = GENMASK(2, 0),
>> +};
>> +
>> +/* Page 0, Register 0x2e */
>> +enum {
>> + HFLIP = BIT(7),
>> + VFLIP = BIT(6),
>> + DEPO_O = BIT(5),
>> + HPO_O = BIT(4),
>> + VPO_O = BIT(3),
>> + TE = GENMASK(2, 0),
>> +};
>> +
>> +/* Page 0, Register 0x2b */
>> +enum {
>> + SWAPS = GENMASK(7, 4),
>> + VFMT = GENMASK(3, 0),
>> +};
>> +
>> +/* Page 0, Register 0x54 */
>> +enum {
>> + COMP_BP = BIT(7),
>> + DAC_EN_T = BIT(6),
>> + HWO_HDMI_HI = GENMASK(5, 3),
>> + HOO_HDMI_HI = GENMASK(2, 0),
>> +};
>> +
>> +/* Page 0, Register 0x57 */
>> +enum {
>> + FLDSEN = BIT(7),
>> + VWO_HDMI_HI = GENMASK(5, 3),
>> + VOO_HDMI_HI = GENMASK(2, 0),
>> +};
>> +
>> +/* Page 0, Register 0x7e */
>> +enum {
>> + HDMI_LVDS_SEL = BIT(7),
>> + DE_GEN = BIT(6),
>> + PWM_INDEX_HI = BIT(5),
>> + USE_DE = BIT(4),
>> + R_INT = GENMASK(3, 0),
>> +};
>> +
>> +/* Page 1, Register 0x07 */
>> +enum {
>> + BPCKSEL = BIT(7),
>> + DRI_CMFB_EN = BIT(6),
>> + CEC_PUEN = BIT(5),
>> + CEC_T = BIT(3),
>> + CKINV = BIT(2),
>> + CK_TVINV = BIT(1),
>> + DRI_CKS2 = BIT(0),
>> +};
>> +
>> +/* Page 1, Register 0x08 */
>> +enum {
>> + DACG = BIT(6),
>> + DACKTST = BIT(5),
>> + DEDGEB = BIT(4),
>> + SYO = BIT(3),
>> + DRI_IT_LVDS = GENMASK(2, 1),
>> + DISPON = BIT(0),
>> +};
>> +
>> +/* Page 1, Register 0x0c */
>> +enum {
>> + DRI_PLL_CP = GENMASK(7, 6),
>> + DRI_PLL_DIVSEL = BIT(5),
>> + DRI_PLL_N1_1 = BIT(4),
>> + DRI_PLL_N1_0 = BIT(3),
>> + DRI_PLL_N3_1 = BIT(2),
>> + DRI_PLL_N3_0 = BIT(1),
>> + DRI_PLL_CKTSTEN = BIT(0),
>> +};
>> +
>> +/* Page 1, Register 0x6b */
>> +enum {
>> + VCO3CS = GENMASK(7, 6),
>> + ICPGBK2_0 = GENMASK(5, 3),
>> + DRI_VCO357SC = BIT(2),
>> + PDPLL2 = BIT(1),
>> + DRI_PD_SER = BIT(0),
>> +};
>> +
>> +/* Page 1, Register 0x6c */
>> +enum {
>> + PLL2N11 = GENMASK(7, 4),
>> + PLL2N5_4 = BIT(3),
>> + PLL2N5_TOP = BIT(2),
>> + DRI_PLL_PD = BIT(1),
>> + PD_I2CM = BIT(0),
>> +};
>> +
>> +/* Page 3, Register 0x28 */
>> +enum {
>> + DIFF_EN = GENMASK(7, 6),
>> + CORREC_EN = GENMASK(5, 4),
>> + VGACLK_BP = BIT(3),
>> + HM_LV_SEL = BIT(2),
>> + HD_VGA_SEL = BIT(1),
>> +};
>> +
>> +/* Page 3, Register 0x2a */
>> +enum {
>> + LVDSCLK_BP = BIT(7),
>> + HDTVCLK_BP = BIT(6),
>> + HDMICLK_BP = BIT(5),
>> + HDTV_BP = BIT(4),
>> + HDMI_BP = BIT(3),
>> + THRWL = GENMASK(2, 0),
>> +};
>> +
>> +/* Page 4, Register 0x52 */
>> +enum {
>> + PGM_ARSTB = BIT(7),
>> + MCU_ARSTB = BIT(6),
>> + MCU_RETB = BIT(2),
>> + RESETIB = BIT(1),
>> + RESETDB = BIT(0),
>> +};
>> +
>> +struct ch7033_priv {
>> + struct regmap *regmap;
>> + struct drm_bridge *next_bridge;
>> + struct drm_bridge bridge;
>> + struct drm_connector connector;
>> +};
>> +
>> +#define conn_to_ch7033_priv(x) \
>> + container_of(x, struct ch7033_priv, connector)
>> +#define bridge_to_ch7033_priv(x) \
>> + container_of(x, struct ch7033_priv, bridge)
>> +
>> +
>> +static enum drm_connector_status ch7033_connector_detect(
>> + struct drm_connector *connector, bool force)
>> +{
>> + struct ch7033_priv *priv = conn_to_ch7033_priv(connector);
>> +
>> + return drm_bridge_detect(priv->next_bridge);
>> +}
>> +
>> +static const struct drm_connector_funcs ch7033_connector_funcs = {
>> + .reset = drm_atomic_helper_connector_reset,
>> + .fill_modes = drm_helper_probe_single_connector_modes,
>> + .detect = ch7033_connector_detect,
>> + .destroy = drm_connector_cleanup,
>> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static int ch7033_connector_get_modes(struct drm_connector *connector)
>> +{
>> + struct ch7033_priv *priv = conn_to_ch7033_priv(connector);
>> + struct edid *edid;
>> + int ret;
>> +
>> + edid = drm_bridge_get_edid(priv->next_bridge, connector);
>
>> + drm_connector_update_edid_property(connector, edid);
> I have seen that others do drm_connector_update_edid_property()
> in the get_modes operation - but I am yet to understand why that
> is correct in a get operation.
> Maybe you know?
>

To attach the newly gathered edid to the connector ? I don't see another place
where it can be done.

Neil

>
>> + if (edid) {
>> + ret = drm_add_edid_modes(connector, edid);
>> + kfree(edid);
>> + } else {
>> + ret = drm_add_modes_noedid(connector, 1920, 1080);
>> + drm_set_preferred_mode(connector, 1024, 768);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static struct drm_encoder *ch7033_connector_best_encoder(
>> + struct drm_connector *connector)
>> +{
>> + struct ch7033_priv *priv = conn_to_ch7033_priv(connector);
>> +
>> + return priv->bridge.encoder;
>> +}
>> +
>> +static const struct drm_connector_helper_funcs ch7033_connector_helper_funcs = {
>> + .get_modes = ch7033_connector_get_modes,
>> + .best_encoder = ch7033_connector_best_encoder,
>> +};
>> +
>> +static void ch7033_hpd_event(void *arg, enum drm_connector_status status)
>> +{
>> + struct ch7033_priv *priv = arg;
>> +
>> + if (priv->bridge.dev)
>> + drm_helper_hpd_irq_event(priv->connector.dev);
>> +}
>> +
>> +static int ch7033_bridge_attach(struct drm_bridge *bridge,
>> + enum drm_bridge_attach_flags flags)
>> +{
>> + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
>> + struct drm_connector *connector = &priv->connector;
>> + int ret;
>> +
>> + ret = drm_bridge_attach(bridge->encoder, priv->next_bridge, bridge,
>> + DRM_BRIDGE_ATTACH_NO_CONNECTOR);
>> + if (ret)
>> + return ret;
>> +
>> + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
>> + return 0;
>> +
>> + if (priv->next_bridge->ops & DRM_BRIDGE_OP_DETECT) {
>> + connector->polled = DRM_CONNECTOR_POLL_HPD;
>> + } else {
>> + connector->polled = DRM_CONNECTOR_POLL_CONNECT |
>> + DRM_CONNECTOR_POLL_DISCONNECT;
>> + }
>> +
>> + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) {
>> + drm_bridge_hpd_enable(priv->next_bridge, ch7033_hpd_event,
>> + priv);
>> + }
>> +
>> + drm_connector_helper_add(connector,
>> + &ch7033_connector_helper_funcs);
>> + ret = drm_connector_init_with_ddc(bridge->dev, &priv->connector,
>> + &ch7033_connector_funcs,
>> + priv->next_bridge->type,
>> + priv->next_bridge->ddc);
>> + if (ret) {
>> + DRM_ERROR("Failed to initialize connector\n");
>> + return ret;
>> + }
>> +
>> + return drm_connector_attach_encoder(&priv->connector, bridge->encoder);
>> +}
>> +
>> +static void ch7033_bridge_detach(struct drm_bridge *bridge)
>> +{
>> + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
>> +
>> + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD)
>> + drm_bridge_hpd_disable(priv->next_bridge);
>> + drm_connector_cleanup(&priv->connector);
>> +}
>> +
>> +static enum drm_mode_status ch7033_bridge_mode_valid(struct drm_bridge *bridge,
>> + const struct drm_display_mode *mode)
>> +{
>> + if (mode->clock > 165000)
>> + return MODE_CLOCK_HIGH;
>> + if (mode->hdisplay >= 1920)
>> + return MODE_BAD_HVALUE;
>> + if (mode->vdisplay >= 1080)
>> + return MODE_BAD_VVALUE;
>> + return MODE_OK;
>> +}
>> +
>> +static void ch7033_bridge_disable(struct drm_bridge *bridge)
>> +{
>> + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
>> +
>> + regmap_write(priv->regmap, 0x03, 0x04);
>> + regmap_update_bits(priv->regmap, 0x52, RESETDB, 0x00);
>> +}
>> +
>> +static void ch7033_bridge_enable(struct drm_bridge *bridge)
>> +{
>> + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
>> +
>> + regmap_write(priv->regmap, 0x03, 0x04);
>> + regmap_update_bits(priv->regmap, 0x52, RESETDB, RESETDB);
>> +}
>> +
>> +static void ch7033_bridge_mode_set(struct drm_bridge *bridge,
>> + const struct drm_display_mode *mode,
>> + const struct drm_display_mode *adjusted_mode)
>> +{
>> + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
>> + int hbporch = mode->hsync_start - mode->hdisplay;
>> + int hsynclen = mode->hsync_end - mode->hsync_start;
>> + int vbporch = mode->vsync_start - mode->vdisplay;
>> + int vsynclen = mode->vsync_end - mode->vsync_start;
>> +
>> + /*
>> + * Page 4
>> + */
>> + regmap_write(priv->regmap, 0x03, 0x04);
>> +
>> + /* Turn everything off to set all the registers to their defaults. */
>> + regmap_write(priv->regmap, 0x52, 0x00);
>> + /* Bring I/O block up. */
>> + regmap_write(priv->regmap, 0x52, RESETIB);
>> +
>> + /*
>> + * Page 0
>> + */
>> + regmap_write(priv->regmap, 0x03, 0x00);
>> +
>> + /* Bring up parts we need from the power down. */
>> + regmap_update_bits(priv->regmap, 0x07, DRI_PD | IO_PD, 0);
>> + regmap_update_bits(priv->regmap, 0x08, DRI_PDDRI | PDDAC | PANEN, 0);
>> + regmap_update_bits(priv->regmap, 0x09, DPD | GCKOFF |
>> + HDMI_PD | VGA_PD, 0);
>> + regmap_update_bits(priv->regmap, 0x0a, HD_DVIB, 0);
>> +
>> + /* Horizontal input timing. */
>> + regmap_write(priv->regmap, 0x0b, (mode->htotal >> 8) << 3 |
>> + (mode->hdisplay >> 8));
>> + regmap_write(priv->regmap, 0x0c, mode->hdisplay);
>> + regmap_write(priv->regmap, 0x0d, mode->htotal);
>> + regmap_write(priv->regmap, 0x0e, (hsynclen >> 8) << 3 |
>> + (hbporch >> 8));
>> + regmap_write(priv->regmap, 0x0f, hbporch);
>> + regmap_write(priv->regmap, 0x10, hsynclen);
>> +
>> + /* Vertical input timing. */
>> + regmap_write(priv->regmap, 0x11, (mode->vtotal >> 8) << 3 |
>> + (mode->vdisplay >> 8));
>> + regmap_write(priv->regmap, 0x12, mode->vdisplay);
>> + regmap_write(priv->regmap, 0x13, mode->vtotal);
>> + regmap_write(priv->regmap, 0x14, ((vsynclen >> 8) << 3) |
>> + (vbporch >> 8));
>> + regmap_write(priv->regmap, 0x15, vbporch);
>> + regmap_write(priv->regmap, 0x16, vsynclen);
>> +
>> + /* Input color swap. */
>> + regmap_update_bits(priv->regmap, 0x18, SWAP, BYTE_SWAP_BGR);
>> +
>> + /* Input clock and sync polarity. */
>> + regmap_update_bits(priv->regmap, 0x19, 0x1, mode->clock >> 16);
>> + regmap_update_bits(priv->regmap, 0x19, HPO_I | VPO_I | GCLKFREQ,
>> + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_I : 0 |
>> + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_I : 0 |
>> + mode->clock >> 16);
>> + regmap_write(priv->regmap, 0x1a, mode->clock >> 8);
>> + regmap_write(priv->regmap, 0x1b, mode->clock);
>> +
>> + /* Horizontal output timing. */
>> + regmap_write(priv->regmap, 0x1f, (mode->htotal >> 8) << 3 |
>> + (mode->hdisplay >> 8));
>> + regmap_write(priv->regmap, 0x20, mode->hdisplay);
>> + regmap_write(priv->regmap, 0x21, mode->htotal);
>> +
>> + /* Vertical output timing. */
>> + regmap_write(priv->regmap, 0x25, (mode->vtotal >> 8) << 3 |
>> + (mode->vdisplay >> 8));
>> + regmap_write(priv->regmap, 0x26, mode->vdisplay);
>> + regmap_write(priv->regmap, 0x27, mode->vtotal);
>> +
>> + /* VGA channel bypass */
>> + regmap_update_bits(priv->regmap, 0x2b, VFMT, 9);
>> +
>> + /* Output sync polarity. */
>> + regmap_update_bits(priv->regmap, 0x2e, HPO_O | VPO_O,
>> + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_O : 0 |
>> + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_O : 0);
>> +
>> + /* HDMI horizontal output timing. */
>> + regmap_update_bits(priv->regmap, 0x54, HWO_HDMI_HI | HOO_HDMI_HI,
>> + (hsynclen >> 8) << 3 |
>> + (hbporch >> 8));
>> + regmap_write(priv->regmap, 0x55, hbporch);
>> + regmap_write(priv->regmap, 0x56, hsynclen);
>> +
>> + /* HDMI vertical output timing. */
>> + regmap_update_bits(priv->regmap, 0x57, VWO_HDMI_HI | VOO_HDMI_HI,
>> + (vsynclen >> 8) << 3 |
>> + (vbporch >> 8));
>> + regmap_write(priv->regmap, 0x58, vbporch);
>> + regmap_write(priv->regmap, 0x59, vsynclen);
>> +
>> + /* Pick HDMI, not LVDS. */
>> + regmap_update_bits(priv->regmap, 0x7e, HDMI_LVDS_SEL, HDMI_LVDS_SEL);
>> +
>> + /*
>> + * Page 1
>> + */
>> + regmap_write(priv->regmap, 0x03, 0x01);
>> +
>> + /* No idea what these do, but VGA is wobbly and blinky without them. */
>> + regmap_update_bits(priv->regmap, 0x07, CKINV, CKINV);
>> + regmap_update_bits(priv->regmap, 0x08, DISPON, DISPON);
>> +
>> + /* DRI PLL */
>> + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_DIVSEL, DRI_PLL_DIVSEL);
>> + if (mode->clock <= 40000) {
>> + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 |
>> + DRI_PLL_N1_0 |
>> + DRI_PLL_N3_1 |
>> + DRI_PLL_N3_0,
>> + 0);
>> + } else if (mode->clock < 80000) {
>> + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 |
>> + DRI_PLL_N1_0 |
>> + DRI_PLL_N3_1 |
>> + DRI_PLL_N3_0,
>> + DRI_PLL_N3_0 |
>> + DRI_PLL_N1_0);
>> + } else {
>> + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 |
>> + DRI_PLL_N1_0 |
>> + DRI_PLL_N3_1 |
>> + DRI_PLL_N3_0,
>> + DRI_PLL_N3_1 |
>> + DRI_PLL_N1_1);
>> + }
>> +
>> + /* This seems to be color calibration for VGA. */
>> + regmap_write(priv->regmap, 0x64, 0x29); /* LSB Blue */
>> + regmap_write(priv->regmap, 0x65, 0x29); /* LSB Green */
>> + regmap_write(priv->regmap, 0x66, 0x29); /* LSB Red */
>> + regmap_write(priv->regmap, 0x67, 0x00); /* MSB Blue */
>> + regmap_write(priv->regmap, 0x68, 0x00); /* MSB Green */
>> + regmap_write(priv->regmap, 0x69, 0x00); /* MSB Red */
>> +
>> + regmap_update_bits(priv->regmap, 0x6b, DRI_PD_SER, 0x00);
>> + regmap_update_bits(priv->regmap, 0x6c, DRI_PLL_PD, 0x00);
>> +
>> + /*
>> + * Page 3
>> + */
>> + regmap_write(priv->regmap, 0x03, 0x03);
>> +
>> + /* More bypasses and apparently another HDMI/LVDS selector. */
>> + regmap_update_bits(priv->regmap, 0x28, VGACLK_BP | HM_LV_SEL,
>> + VGACLK_BP | HM_LV_SEL);
>> + regmap_update_bits(priv->regmap, 0x2a, HDMICLK_BP | HDMI_BP,
>> + HDMICLK_BP | HDMI_BP);
>> +
>> + /*
>> + * Page 4
>> + */
>> + regmap_write(priv->regmap, 0x03, 0x04);
>> +
>> + /* Output clock. */
>> + regmap_write(priv->regmap, 0x10, mode->clock >> 16);
>> + regmap_write(priv->regmap, 0x11, mode->clock >> 8);
>> + regmap_write(priv->regmap, 0x12, mode->clock);
>> +}
>> +
>> +static const struct drm_bridge_funcs ch7033_bridge_funcs = {
>> + .attach = ch7033_bridge_attach,
>> + .detach = ch7033_bridge_detach,
>> + .mode_valid = ch7033_bridge_mode_valid,
>> + .disable = ch7033_bridge_disable,
>> + .enable = ch7033_bridge_enable,
>> + .mode_set = ch7033_bridge_mode_set,
>> +};
>> +
>> +static const struct regmap_config ch7033_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> + .max_register = 0x7f,
>> +};
>> +
>> +static int ch7033_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct device *dev = &client->dev;
>> + struct ch7033_priv *priv;
>> + unsigned int val;
>> + int ret;
>> +
>> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + dev_set_drvdata(dev, priv);
>> +
>> + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, -1, NULL,
>> + &priv->next_bridge);
>> + if (ret)
>> + return ret;
>> +
>> + priv->regmap = devm_regmap_init_i2c(client, &ch7033_regmap_config);
>> + if (IS_ERR(priv->regmap)) {
>> + dev_err(&client->dev, "regmap init failed\n");
>> + return PTR_ERR(priv->regmap);
>> + }
>> +
>> + ret = regmap_read(priv->regmap, 0x00, &val);
>> + if (ret < 0) {
>> + dev_err(&client->dev, "error reading the model id: %d\n", ret);
>> + return ret;
>> + }
>> + if ((val & 0xf7) != 0x56) {
>> + dev_err(&client->dev, "the device is not a ch7033\n");
>> + return -ENODEV;
>> + }
>> +
>> + regmap_write(priv->regmap, 0x03, 0x04);
>> + ret = regmap_read(priv->regmap, 0x51, &val);
>> + if (ret < 0) {
>> + dev_err(&client->dev, "error reading the model id: %d\n", ret);
>> + return ret;
>> + }
>> + if ((val & 0x0f) != 3) {
>> + dev_err(&client->dev, "unknown revision %u\n", val);
>> + return -ENODEV;
>> + }
>> +
>> + INIT_LIST_HEAD(&priv->bridge.list);
>> + priv->bridge.funcs = &ch7033_bridge_funcs;
>> + priv->bridge.of_node = dev->of_node;
>> + drm_bridge_add(&priv->bridge);
>> +
>> + dev_info(dev, "Chrontel CH7033 Video Encoder\n");
>> + return 0;
>> +}
>> +
>> +static int ch7033_remove(struct i2c_client *client)
>> +{
>> + struct device *dev = &client->dev;
>> + struct ch7033_priv *priv = dev_get_drvdata(dev);
>> +
>> + drm_bridge_remove(&priv->bridge);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id ch7033_dt_ids[] = {
>> + { .compatible = "chrontel,ch7033", },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, ch7033_dt_ids);
>> +
>> +static const struct i2c_device_id ch7033_ids[] = {
>> + { "ch7033", 0 },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(i2c, ch7033_ids);
>> +
>> +static struct i2c_driver ch7033_driver = {
>> + .probe = ch7033_probe,
>> + .remove = ch7033_remove,
>> + .driver = {
>> + .name = "ch7033",
>> + .of_match_table = of_match_ptr(ch7033_dt_ids),
>> + },
>> + .id_table = ch7033_ids,
>> +};
>> +
>> +module_i2c_driver(ch7033_driver);
>> +
>> +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
>> +MODULE_DESCRIPTION("Chrontel CH7033 Video Encoder Driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.26.0
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel

\
 
 \ /
  Last update: 2020-05-05 09:23    [W:1.193 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site