lkml.org 
[lkml]   [2020]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] dt-bindings: thermal: tsens: Add zeroc interrupt support in yaml
On Tue, May 5, 2020 at 4:43 PM Manaf Meethalavalappu Pallikunhi
<manafm@codeaurora.org> wrote:
>
> Add 0C (zeroc) interrupt support for tsens in yaml.
>
> Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
> ---
> Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index 2ddd39d96766..8a0893f77d20 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -52,12 +52,14 @@ properties:
> items:
> - description: Combined interrupt if upper or lower threshold crossed
> - description: Interrupt if critical threshold crossed
> + - description: Interrupt if zeroC threshold is crossed
>
> interrupt-names:
> minItems: 1
> items:
> - const: uplow
> - const: critical
> + - const: zeroc
>
> nvmem-cells:
> minItems: 1
> @@ -168,8 +170,9 @@ examples:
> <0xc222000 0x1ff>;
>
> interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "uplow", "critical";
> + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "uplow", "critical", "zeroc";


Add a new example for v2 with 0C interrupt here instead of reusing the old one.

> #qcom,sensors = <13>;
> #thermal-sensor-cells = <1>;
> --
> 2.26.2

\
 
 \ /
  Last update: 2020-05-05 14:12    [W:0.205 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site