Messages in this thread | | | Date | Tue, 5 May 2020 12:54:13 +0200 | From | Greg Kroah-Hartman <> | Subject | Re: [PATCH v6 4/4] usb: host: Add ability to build new Broadcom STB USB drivers |
| |
On Thu, Apr 30, 2020 at 07:12:58AM -0400, Al Cooper wrote: > Add the build system changes needed to get the Broadcom STB XHCI, > EHCI and OHCI functionality working. The OHCI support does not > require anything unique to Broadcom so the standard ohci-platform > driver is being used. The link order for XHCI was changed in the > Makefile because of the way STB XHCI, EHCI and OHCI controllers > share a port which requires that the XHCI driver be initialized > first. Also update MAINTAINERS. > > Signed-off-by: Al Cooper <alcooperx@gmail.com> > --- > MAINTAINERS | 8 ++++++++ > drivers/usb/host/Kconfig | 16 ++++++++++++++++ > drivers/usb/host/Makefile | 16 ++++++++++------ > 3 files changed, 34 insertions(+), 6 deletions(-) > > diff --git a/MAINTAINERS b/MAINTAINERS > index 26f281d9f32a..6147ed78d212 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -3481,6 +3481,14 @@ S: Supported > F: Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml > F: drivers/i2c/busses/i2c-brcmstb.c > > +BROADCOM BRCMSTB USB EHCI DRIVER > +M: Al Cooper <alcooperx@gmail.com> > +L: linux-usb@vger.kernel.org > +L: bcm-kernel-feedback-list@broadcom.com > +S: Maintained > +F: Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml > +F: drivers/usb/host/ehci-brcm.* > + > BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER > M: Al Cooper <alcooperx@gmail.com> > L: linux-kernel@vger.kernel.org > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index 55bdfdf11e4c..7d58fd66e412 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -97,6 +97,22 @@ config USB_XHCI_TEGRA > > endif # USB_XHCI_HCD > > +config USB_EHCI_BRCMSTB > + tristate > + > +config USB_BRCMSTB > + tristate "Broadcom STB USB support" > + depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST > + select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD > + select USB_EHCI_BRCMSTB if USB_EHCI_HCD > + select USB_XHCI_PLATFORM if USB_XHCI_HCD > + help > + Say Y to enable support for XHCI, EHCI and OHCI host controllers > + found in Broadcom STB SoC's. > + > + Disabling this will keep the controllers and corresponding > + PHYs powered down.
Whhat are the module names?
And why 2 config options here?
> + > config USB_EHCI_HCD > tristate "EHCI HCD (USB 2.0) support" > depends on HAS_DMA && HAS_IOMEM > diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile > index b191361257cc..85fa6ace552a 100644 > --- a/drivers/usb/host/Makefile > +++ b/drivers/usb/host/Makefile > @@ -37,6 +37,15 @@ endif > > obj-$(CONFIG_USB_PCI) += pci-quirks.o > > +# NOTE: BRCMSTB systems require that xhci driver be linked before the > +# ehci/ohci drivers.
Why? Please do this as a separate change before your makefile changes.
And what else will this break? We have relied on this link order for a very long time, changing it could cause issues...
I don't see how your driver needs this, please explain in great detail.
thanks,
greg k-h
| |