Messages in this thread | | | From | "Wong, Vee Khee" <> | Subject | RE: [PATCH net-next 1/1] net: stmmac: Add option for VLAN filter fail queue enable | Date | Wed, 6 May 2020 03:31:00 +0000 |
| |
> -----Original Message----- > From: netdev-owner@vger.kernel.org <netdev-owner@vger.kernel.org> On > Behalf Of David Miller > Sent: Friday, April 24, 2020 6:53 AM > To: Wong, Vee Khee <vee.khee.wong@intel.com> > Cc: peppe.cavallaro@st.com; alexandre.torgue@st.com; > joabreu@synopsys.com; mcoquelin.stm32@gmail.com; > netdev@vger.kernel.org; linux-stm32@st-md-mailman.stormreply.com; > linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Ong, > Boon Leong <boon.leong.ong@intel.com>; Voon, Weifeng > <weifeng.voon@intel.com> > Subject: Re: [PATCH net-next 1/1] net: stmmac: Add option for VLAN filter fail > queue enable > > From: Wong Vee Khee <vee.khee.wong@intel.com> > Date: Thu, 23 Apr 2020 15:00:26 +0800 > > > From: "Chuah, Kim Tatt" <kim.tatt.chuah@intel.com> > > > > Add option in plat_stmmacenet_data struct to enable VLAN Filter Fail > > Queuing. This option allows packets that fail VLAN filter to be routed > > to a specific Rx queue when Receive All is also set. > > > > When this option is enabled: > > - Enable VFFQ only when entering promiscuous mode, because Receive All > > will pass up all rx packets that failed address filtering (similar to > > promiscuous mode). > > - VLAN-promiscuous mode is never entered to allow rx packet to fail VLAN > > filters and get routed to selected VFFQ Rx queue. > > > > Reviewed-by: Voon Weifeng <weifeng.voon@intel.com> > > Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com> > > Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com> > > Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> > > Why would you be setting this with a platform attribute? Even if the > capability exists, wouldn't you want the user to be able to choose to opt out?
Hi Jose/David Miller,
1/ In current implementation, TSN uses VLAN filter that can either accept/reject VLAN-tagged network packets. In some situation, we do not want to drop failed packets, but instead steer the packet to a VLAN Failed Queue Channel.
2/ VLAN Fail Queue Channel will be set to use the RxQ with higheset index as per HW IP configuration because that is the least priority channel.
3/ The way user will enable this feature is through promiscuous mode settings using ifconfig. (e.g. ifconfig enp0s30f4 promisc)
4/ VLAN Filter Fail Packets Queue feature is IP version specific (only applicable to DWMAC5). I would propose we add this under platform data (e.g. dwmac-intel), so that it can be built in according to hardware on a separate patch.
Any thoughts?
| |