lkml.org 
[lkml]   [2020]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/2] soc: ti: add k3 platforms chipid module driver
From
Date


On 5/5/20 12:34 PM, Grygorii Strashko wrote:
> Hi All,
>
> This series introduces TI K3 Multicore SoC platforms chipid module driver
> which provides identification support of the TI K3 SoCs (family, revision)
> and register this information with the SoC bus. It is available under
> /sys/devices/soc0/ for user space, and can be checked, where needed,
> in Kernel using soc_device_match().
> It is also required for introducing support for new revisions of
> K3 AM65x/J721E SoCs.
>
> Example J721E:
> # cat /sys/devices/soc0/{machine,family,revision}
> Texas Instruments K3 J721E SoC
> J721E
> SR1.0
>
> Example AM65x:
> # cat /sys/devices/soc0/{machine,family,revision}
> Texas Instruments AM654 Base Board
> AM65X
> SR1.0
>
> Changes in v2:
> - pr_debug() replaced with pr_info() to show SoC info on init
> - minor format change
> - split series on driver and platform changes
> - add Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
>
> v1: https://lwn.net/Articles/818577/
>
> Grygorii Strashko (2):
> dt-bindings: soc: ti: add binding for k3 platforms chipid module
> soc: ti: add k3 platforms chipid module driver
>
Need ack from DT maintainers on bindings.

Regards,
Santosh

\
 
 \ /
  Last update: 2020-05-06 01:22    [W:2.413 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site