lkml.org 
[lkml]   [2020]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/2] devicetree: bindings: phy: Document ipq806x dwc3 qcom phy
On Fri, May 01, 2020 at 11:58:05PM +0200, Ansuel Smith wrote:
> Document dwc3 qcom phy hs and ss phy bindings needed to correctly
> inizialize and use usb on ipq806x SoC.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> v5:
> * Fix dt_binding_check error
> v4:
> * Add qcom to specific bindings
> v3:
> * Use explicit reg instead of regmap
>
> .../bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 58 ++++++++++++++
> .../bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 79 +++++++++++++++++++
> 2 files changed, 137 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml
> create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml
> new file mode 100644
> index 000000000000..c019de7478e3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/qcom,ipq806x-usb-phy-hs.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm ipq806x usb DWC3 HS PHY CONTROLLER
> +
> +maintainers:
> + - Ansuel Smith <ansuelsmth@gmail.com>
> +
> +description:
> + DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
> + controllers used in ipq806x. Each DWC3 PHY controller should have its
> + own node.
> +
> +properties:
> + compatible:
> + const: qcom,ipq806x-usb-phy-hs
> +
> + "#phy-cells":
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + maxItems: 2
> +
> + clock-names:
> + minItems: 1
> + maxItems: 2
> + description: |
> + - "ref" Is required
> + - "xo" Optional external reference clock
> + items:
> + - const: ref
> + - const: xo
> +
> +required:
> + - compatible
> + - "#phy-cells"
> + - reg
> + - clocks
> + - clock-names
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
> +
> + hs_phy_0: phy@110f8800 {
> + compatible = "qcom,ipq806x-usb-phy-hs";
> + reg = <0x110f8800 0x30>;
> + clocks = <&gcc USB30_0_UTMI_CLK>;
> + clock-names = "ref";
> + #phy-cells = <0>;
> + };
> diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml
> new file mode 100644
> index 000000000000..fa10a1c51cf0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/qcom,ipq806x-usb-phy-ss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm ipq806x usb DWC3 SS PHY CONTROLLER
> +
> +maintainers:
> + - Ansuel Smith <ansuelsmth@gmail.com>
> +
> +description:
> + DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
> + controllers used in ipq806x. Each DWC3 PHY controller should have its
> + own node.
> +
> +properties:
> + compatible:
> + const: qcom,ipq806x-usb-phy-ss
> +
> + "#phy-cells":
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + maxItems: 2
> +
> + clock-names:
> + minItems: 1
> + maxItems: 2
> + description: |
> + - "ref" Required.
> + - "xo" Optional external reference clock.

description just repeats what the schema says. Just drop.

> + items:
> + - const: ref
> + - const: xo
> +
> + qcom,rx_eq:

s/_/-/

> + maxItems: 1

Drop. Not an array.

> + description: Override value for rx_eq.
> + default: 4

0-2^32 are okay values?

> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> + qcom,tx_deamp_3_5db:

Same issues in this one.

> + maxItems: 1
> + description: Override value for transmit preemphasis.
> + default: 23
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> + qcom,mpll:

And here.

> + maxItems: 1
> + description: Override value for mpll.
> + default: 0
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> +required:
> + - compatible
> + - "#phy-cells"
> + - reg
> + - clocks
> + - clock-names
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
> +
> + ss_phy_0: phy@110f8830 {
> + compatible = "qcom,ipq806x-usb-phy-ss";
> + reg = <0x110f8830 0x30>;
> + clocks = <&gcc USB30_0_MASTER_CLK>;
> + clock-names = "ref";
> + #phy-cells = <0>;
> + };
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2020-05-05 21:15    [W:0.689 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site