Messages in this thread | | | Date | Tue, 5 May 2020 11:42:23 -0700 | From | Tony Lindgren <> | Subject | Re: [PATCH] ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2 |
| |
* Adam Ford <aford173@gmail.com> [200504 16:02]: > Various OMAP3 boards have two AES blocks, but only one is currently > available, because the hwmods are only configured for one. > > This patch migrates the hwmods for the AES engine to sysc-omap2 > which allows the second AES crypto engine to become available. > > omap-aes 480a6000.aes1: OMAP AES hw accel rev: 2.6 > omap-aes 480a6000.aes1: will run requests pump with realtime priority > omap-aes 480c5000.aes2: OMAP AES hw accel rev: 2.6 > omap-aes 480c5000.aes2: will run requests pump with realtime priority
Great :) Looks like I'm getting the following though:
DTC arch/arm/boot/dts/am3517-craneboard.dtb arch/arm/boot/dts/omap3.dtsi:160.39-184.5: ERROR (phandle_references): /ocp@68000000/target-module@480a6000: Reference to non-existent node or label "aes1_ick"
Is this patch maybe missing a change for am3717 for the aes1_ick?
Regards,
Tony
| |