lkml.org 
[lkml]   [2020]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v8 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
    Date
    On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
    loaded directly from an EEPROM or, if not present, by the SoC's
    VideoCore. Inform VideoCore that VL805 was just reset.

    Also, as this creates a dependency between USB_PCI and VideoCore's
    firmware interface, and since USB_PCI can't be set as a module neither
    this can. Reflect that on the firmware interface Kconfg.

    Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
    ---

    Changes since v5:
    - Fix Kconfig issue with allmodconfig

    Changes since v4:
    - Do not split up error message

    Changes since v3:
    - Add more complete error message

    Changes since v1:
    - Make RASPBERRYPI_FIRMWARE dependent on this quirk to make sure it
    gets compiled when needed.

    drivers/firmware/Kconfig | 3 ++-
    drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
    2 files changed, 18 insertions(+), 1 deletion(-)

    diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
    index 8007d4aa76dc..b42140cff8ac 100644
    --- a/drivers/firmware/Kconfig
    +++ b/drivers/firmware/Kconfig
    @@ -178,8 +178,9 @@ config ISCSI_IBFT
    Otherwise, say N.

    config RASPBERRYPI_FIRMWARE
    - tristate "Raspberry Pi Firmware Driver"
    + bool "Raspberry Pi Firmware Driver"
    depends on BCM2835_MBOX
    + default USB_PCI
    help
    This option enables support for communicating with the firmware on the
    Raspberry Pi.
    diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
    index 92150ecdb036..0b949acfa258 100644
    --- a/drivers/usb/host/pci-quirks.c
    +++ b/drivers/usb/host/pci-quirks.c
    @@ -16,6 +16,9 @@
    #include <linux/export.h>
    #include <linux/acpi.h>
    #include <linux/dmi.h>
    +
    +#include <soc/bcm2835/raspberrypi-firmware.h>
    +
    #include "pci-quirks.h"
    #include "xhci-ext-caps.h"

    @@ -1243,11 +1246,24 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev)

    static void quirk_usb_early_handoff(struct pci_dev *pdev)
    {
    + int ret;
    +
    /* Skip Netlogic mips SoC's internal PCI USB controller.
    * This device does not need/support EHCI/OHCI handoff
    */
    if (pdev->vendor == 0x184e) /* vendor Netlogic */
    return;
    +
    + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
    + ret = rpi_firmware_init_vl805(pdev);
    + if (ret) {
    + /* Firmware might be outdated, or something failed */
    + dev_warn(&pdev->dev,
    + "Failed to load VL805's firmware: %d. Will continue to attempt to work, but bad things might happen. You should fix this...\n",
    + ret);
    + }
    + }
    +
    if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
    pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
    pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
    --
    2.26.2
    \
     
     \ /
      Last update: 2020-05-05 18:13    [W:4.157 / U:0.044 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site