lkml.org 
[lkml]   [2020]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] epoll: ensure ep_poll() doesn't miss wakeup events
From
Date


On 5/4/20 12:29 AM, Jason Baron wrote:
>
>
> On 5/3/20 6:24 AM, Roman Penyaev wrote:
>> On 2020-05-02 00:09, Jason Baron wrote:
>>> On 5/1/20 5:02 PM, Roman Penyaev wrote:
>>>> Hi Jason,
>>>>
>>>> That is indeed a nice catch.
>>>> Seems we need smp_rmb() pair between list_empty_careful(&rp->rdllist) and
>>>> READ_ONCE(ep->ovflist) for ep_events_available(), do we?
>>>>
>>>
>>> Hi Roman,
>>>
>>> Good point, even if we order those reads its still racy, since the
>>> read of the ready list could come after its been cleared and the
>>> read of the overflow could again come after its been cleared.
>>
>> You mean the second chunk? True. Sigh.
>>
>>> So I'm afraid we might need instead something like this to make
>>> sure they are read together:
>>
>> No, impossible, I can't believe in that :) We can't give up.
>>
>> All we need is to keep a mark, that ep->rdllist is not empty,
>> even we've just spliced it.  ep_poll_callback() always takes
>> the ->ovflist path, if ->ovflist is not EP_UNACTIVE_PTR, but
>> ep_events_available() does not need to observe ->ovflist at
>> all, just a ->rdllist.
>>
>> Take a look at that, do I miss something? :
>>
>> diff --git a/fs/eventpoll.c b/fs/eventpoll.c
>> index aba03ee749f8..a8770f9a917e 100644
>> --- a/fs/eventpoll.c
>> +++ b/fs/eventpoll.c
>> @@ -376,8 +376,7 @@ static void ep_nested_calls_init(struct nested_calls *ncalls)
>>   */
>>  static inline int ep_events_available(struct eventpoll *ep)
>>  {
>> -       return !list_empty_careful(&ep->rdllist) ||
>> -               READ_ONCE(ep->ovflist) != EP_UNACTIVE_PTR;
>> +       return !list_empty_careful(&ep->rdllist);
>>  }
>>
>>  #ifdef CONFIG_NET_RX_BUSY_POLL
>> @@ -683,7 +682,8 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,
>>  {
>>         __poll_t res;
>>         struct epitem *epi, *nepi;
>> -       LIST_HEAD(txlist);
>> +       LIST_HEAD(rdllist);
>> +       LIST_HEAD(ovflist);
>>
>>         lockdep_assert_irqs_enabled();
>>
>> @@ -704,14 +704,22 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,
>>          * in a lockless way.
>>          */
>>         write_lock_irq(&ep->lock);
>> -       list_splice_init(&ep->rdllist, &txlist);
>> +       /*
>> +        * We do not call list_splice_init() because for lockless
>> +        * ep_events_available() ->rdllist is still "not empty".
>> +        * Otherwise the feature that there is something left in
>> +        * the list can be lost which causes missed wakeup.
>> +        */
>> +       list_splice(&ep->rdllist, &rdllist);
>> +       /*
>> +        * If ->rdllist was empty we should pretend it was not,
>> +        * because after the unlock ->ovflist comes into play,
>> +        * which is invisible for lockless ep_events_available().
>> +        */
>> +       ep->rdllist.next = LIST_POISON1;
>>         WRITE_ONCE(ep->ovflist, NULL);
>>         write_unlock_irq(&ep->lock);
>>
>>         /*
>>          * Now call the callback function.
>>          */
>> -       res = (*sproc)(ep, &txlist, priv);
>> +       res = (*sproc)(ep, &rdllist, priv);
>>
>>         write_lock_irq(&ep->lock);
>>         /*
>> @@ -724,7 +732,7 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,
>>                 /*
>>                  * We need to check if the item is already in the list.
>>                  * During the "sproc" callback execution time, items are
>> -                * queued into ->ovflist but the "txlist" might already
>> +                * queued into ->ovflist but the "rdllist" might already
>>                  * contain them, and the list_splice() below takes care of them.
>>                  */
>>                 if (!ep_is_linked(epi)) {
>> @@ -732,7 +740,7 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,
>>                          * ->ovflist is LIFO, so we have to reverse it in order
>>                          * to keep in FIFO.
>>                          */
>> -                       list_add(&epi->rdllink, &ep->rdllist);
>> +                       list_add(&epi->rdllink, &ovflist);
>>                         ep_pm_stay_awake(epi);
>>                 }
>>         }
>> @@ -743,10 +751,11 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,
>>          */
>>         WRITE_ONCE(ep->ovflist, EP_UNACTIVE_PTR);
>>
>> -       /*
>> -        * Quickly re-inject items left on "txlist".
>> -        */
>> -       list_splice(&txlist, &ep->rdllist);
>> +       /* Events from ->ovflist happened later, thus splice to the tail */
>> +       list_splice_tail(&ovflist, &rdllist);
>> +       /* Just replace list */
>> +       list_replace(&rdllist, &ep->rdllist);
>> +
>>         __pm_relax(ep->ws);
>>         write_unlock_irq(&ep->lock);
>>
>> @@ -1763,13 +1772,13 @@ static __poll_t ep_send_events_proc(struct eventpoll *ep, struct list_head *head
>>                          * Trigger mode, we need to insert back inside
>>                          * the ready list, so that the next call to
>>                          * epoll_wait() will check again the events
>> -                        * availability. At this point, no one can insert
>> -                        * into ep->rdllist besides us. The epoll_ctl()
>> -                        * callers are locked out by
>> -                        * ep_scan_ready_list() holding "mtx" and the
>> -                        * poll callback will queue them in ep->ovflist.
>> +                        * availability. What we do here is simply
>> +                        * return the epi to the same position where
>> +                        * it was, the ep_scan_ready_list() will
>> +                        * re-inject the leftovers to the ->rdllist
>> +                        * under the proper lock.
>>                          */
>> -                       list_add_tail(&epi->rdllink, &ep->rdllist);
>> +                       list_add_tail(&epi->rdllink, &tmp->rdllink);
>>                         ep_pm_stay_awake(epi);
>>                 }
>>         }
>>
>>
>> --
>> Roman
>>
>
>
> Hi Roman,
>
> I think this misses an important case - the initial ep_poll_callback()
> may queue to the overflow list. In this case ep_poll has no visibility
> into the event since its only checking ep->rdllist.

Ok, my mistake - I see it sets: ep->rdllist.next = LIST_POISON1; for that
case. Ok I think this approach makes sense then.

Thanks,

-Jason

\
 
 \ /
  Last update: 2020-05-04 07:01    [W:0.054 / U:1.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site