lkml.org 
[lkml]   [2020]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/5] Statsfs: a new ram-based file sytem for Linux kernel statistics
On Mon, 4 May 2020, Emanuele Giuseppe Esposito wrote:

> There is currently no common way for Linux kernel subsystems to expose
> statistics to userspace shared throughout the Linux kernel; subsystems
> have to take care of gathering and displaying statistics by themselves,
> for example in the form of files in debugfs. For example KVM has its own
> code section that takes care of this in virt/kvm/kvm_main.c, where it sets
> up debugfs handlers for displaying values and aggregating them from
> various subfolders to obtain information about the system state (i.e.
> displaying the total number of exits, calculated by summing all exits of
> all cpus of all running virtual machines).
>
> Allowing each section of the kernel to do so has two disadvantages. First,
> it will introduce redundant code. Second, debugfs is anyway not the right
> place for statistics (for example it is affected by lockdown)
>
> In this patch series I introduce statsfs, a synthetic ram-based virtual
> filesystem that takes care of gathering and displaying statistics for the
> Linux kernel subsystems.
>

This is exciting, we have been looking in the same area recently. Adding
Jonathan Adams <jwadams@google.com>.

In your diffstat, one thing I notice that is omitted: an update to
Documentation/* :) Any chance of getting some proposed Documentation/
updates with structure of the fs, the per subsystem breakdown, and best
practices for managing the stats from the kernel level?

> The file system is mounted on /sys/kernel/stats and would be already used
> by kvm. Statsfs was initially introduced by Paolo Bonzini [1].
>
> Statsfs offers a generic and stable API, allowing any kind of
> directory/file organization and supporting multiple kind of aggregations
> (not only sum, but also average, max, min and count_zero) and data types
> (all unsigned and signed types plus boolean). The implementation, which is
> a generalization of KVM’s debugfs statistics code, takes care of gathering
> and displaying information at run time; users only need to specify the
> values to be included in each source.
>
> Statsfs would also be a different mountpoint from debugfs, and would not
> suffer from limited access due to the security lock down patches. Its main
> function is to display each statistics as a file in the desired folder
> hierarchy defined through the API. Statsfs files can be read, and possibly
> cleared if their file mode allows it.
>
> Statsfs has two main components: the public API defined by
> include/linux/statsfs.h, and the virtual file system which should end up
> in /sys/kernel/stats.
>
> The API has two main elements, values and sources. Kernel subsystems like
> KVM can use the API to create a source, add child
> sources/values/aggregates and register it to the root source (that on the
> virtual fs would be /sys/kernel/statsfs).
>
> Sources are created via statsfs_source_create(), and each source becomes a
> directory in the file system. Sources form a parent-child relationship;
> root sources are added to the file system via statsfs_source_register().
> Every other source is added to or removed from a parent through the
> statsfs_source_add_subordinate and statsfs_source_remote_subordinate APIs.
> Once a source is created and added to the tree (via add_subordinate), it
> will be used to compute aggregate values in the parent source.
>
> Values represent quantites that are gathered by the statsfs user. Examples
> of values include the number of vm exits of a given kind, the amount of
> memory used by some data structure, the length of the longest hash table
> chain, or anything like that. Values are defined with the
> statsfs_source_add_values function. Each value is defined by a struct
> statsfs_value; the same statsfs_value can be added to many different
> sources. A value can be considered "simple" if it fetches data from a
> user-provided location, or "aggregate" if it groups all values in the
> subordinates sources that include the same statsfs_value.
>

This seems like it could have a lot of overhead if we wanted to
periodically track the totality of subsystem stats as a form of telemetry
gathering from userspace. To collect telemetry for 1,000 different stats,
do we need to issue lseek()+read() syscalls for each of them individually
(or, worse, open()+read()+close())?

Any thoughts on how that can be optimized? A couple of ideas:

- an interface that allows gathering of all stats for a particular
interface through a single file that would likely be encoded in binary
and the responsibility of userspace to disseminate, or

- an interface that extends beyond this proposal and allows the reader to
specify which stats they are interested in collecting and then the
kernel will only provide these stats in a well formed structure and
also be binary encoded.

We've found that the one-file-per-stat method is pretty much a show
stopper from the performance view and we always must execute at least two
syscalls to obtain a single stat.

Since this is becoming a generic API (good!!), maybe we can discuss
possible ways to optimize gathering of stats in mass?

> For more information, please consult the kerneldoc documentation in patch
> 2 and the sample uses in the kunit tests and in KVM.
>
> This series of patches is based on my previous series "libfs: group and
> simplify linux fs code" and the single patch sent to kvm "kvm_host: unify
> VM_STAT and VCPU_STAT definitions in a single place". The former
> simplifies code duplicated in debugfs and tracefs (from which statsfs is
> based on), the latter groups all macros definition for statistics in kvm
> in a single common file shared by all architectures.
>
> Patch 1 adds a new refcount and kref destructor wrappers that take a
> semaphore, as those are used later by statsfs. Patch 2 introduces the
> statsfs API, patch 3 provides extensive tests that can also be used as
> example on how to use the API and patch 4 adds the file system support.
> Finally, patch 5 provides a real-life example of statsfs usage in KVM.
>
> [1] https://lore.kernel.org/kvm/5d6cdcb1-d8ad-7ae6-7351-3544e2fa366d@redhat.com/?fbclid=IwAR18LHJ0PBcXcDaLzILFhHsl3qpT3z2vlG60RnqgbpGYhDv7L43n0ZXJY8M
>
> Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
>
> v1->v2 remove unnecessary list_foreach_safe loops, fix wrong indentation,
> change statsfs in stats_fs
>
> Emanuele Giuseppe Esposito (5):
> refcount, kref: add dec-and-test wrappers for rw_semaphores
> stats_fs API: create, add and remove stats_fs sources and values
> kunit: tests for stats_fs API
> stats_fs fs: virtual fs to show stats to the end-user
> kvm_main: replace debugfs with stats_fs
>
> MAINTAINERS | 7 +
> arch/arm64/kvm/Kconfig | 1 +
> arch/arm64/kvm/guest.c | 2 +-
> arch/mips/kvm/Kconfig | 1 +
> arch/mips/kvm/mips.c | 2 +-
> arch/powerpc/kvm/Kconfig | 1 +
> arch/powerpc/kvm/book3s.c | 6 +-
> arch/powerpc/kvm/booke.c | 8 +-
> arch/s390/kvm/Kconfig | 1 +
> arch/s390/kvm/kvm-s390.c | 16 +-
> arch/x86/include/asm/kvm_host.h | 2 +-
> arch/x86/kvm/Kconfig | 1 +
> arch/x86/kvm/Makefile | 2 +-
> arch/x86/kvm/debugfs.c | 64 --
> arch/x86/kvm/stats_fs.c | 56 ++
> arch/x86/kvm/x86.c | 6 +-
> fs/Kconfig | 12 +
> fs/Makefile | 1 +
> fs/stats_fs/Makefile | 6 +
> fs/stats_fs/inode.c | 337 ++++++++++
> fs/stats_fs/internal.h | 35 +
> fs/stats_fs/stats_fs-tests.c | 1088 +++++++++++++++++++++++++++++++
> fs/stats_fs/stats_fs.c | 773 ++++++++++++++++++++++
> include/linux/kref.h | 11 +
> include/linux/kvm_host.h | 39 +-
> include/linux/refcount.h | 2 +
> include/linux/stats_fs.h | 304 +++++++++
> include/uapi/linux/magic.h | 1 +
> lib/refcount.c | 32 +
> tools/lib/api/fs/fs.c | 21 +
> virt/kvm/arm/arm.c | 2 +-
> virt/kvm/kvm_main.c | 314 ++-------
> 32 files changed, 2772 insertions(+), 382 deletions(-)
> delete mode 100644 arch/x86/kvm/debugfs.c
> create mode 100644 arch/x86/kvm/stats_fs.c
> create mode 100644 fs/stats_fs/Makefile
> create mode 100644 fs/stats_fs/inode.c
> create mode 100644 fs/stats_fs/internal.h
> create mode 100644 fs/stats_fs/stats_fs-tests.c
> create mode 100644 fs/stats_fs/stats_fs.c
> create mode 100644 include/linux/stats_fs.h
>
> --
> 2.25.2
>
>
\
 
 \ /
  Last update: 2020-05-04 23:37    [W:1.510 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site