lkml.org 
[lkml]   [2020]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRE: [PATCH v3 3/5] scsi: ufs: add LU Dedicated buffer mode support for WriteBooster
From
Date
Hi Avri,

On Sat, 2020-05-02 at 15:32 +0000, Avri Altman wrote:
> Hi Stanley,
> Few more nits.
> Thanks,
> Avri

All fixed in v4.
Thanks for these suggestions.

Stanley Chu

>
> >
> > According to UFS specification, there are two WriteBooster mode of
> > operations: "LU dedicated buffer" mode and "shared buffer" mode.
> > In the "LU dedicated buffer" mode, the WriteBooster Buffer is
> > dedicated to a logical unit.
> >
> > If the device supports the "LU dedicated buffer" mode, this mode is
> > configured by setting bWriteBoosterBufferType to 00h. The logical
> > unit WriteBooster Buffer size is configured by setting the
> > dLUNumWriteBoosterBufferAllocUnits field of the related Unit
> > Descriptor. Only a value greater than zero enables the WriteBooster
> > feature in the logical unit.
> >
> > Modify ufshcd_wb_probe() as above description to support LU Dedicated
> > buffer mode.
> >
> > Note that according to UFS 3.1 specification, the valid value of
> > bDeviceMaxWriteBoosterLUs parameter in Geometry Descriptor is 1,
> > which means at most one LUN can have WriteBooster buffer in "LU
> > dedicated buffer mode". Therefore this patch supports only one
> > LUN with WriteBooster enabled. All WriteBooster related sysfs nodes
> > are specifically mapped to the LUN with WriteBooster enabled in
> > LU Dedicated buffer mode.
> >
> > Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
> > ---
> > drivers/scsi/ufs/ufs-sysfs.c | 14 ++++++++-
> > drivers/scsi/ufs/ufs.h | 7 +++++
> > drivers/scsi/ufs/ufshcd.c | 60 +++++++++++++++++++++++++++++-------
> > drivers/scsi/ufs/ufshcd.h | 1 +
> > 4 files changed, 70 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
> > index b86b6a40d7e6..a162f63098e5 100644
> > --- a/drivers/scsi/ufs/ufs-sysfs.c
> > +++ b/drivers/scsi/ufs/ufs-sysfs.c
> > @@ -622,16 +622,28 @@ static const struct attribute_group
> > ufs_sysfs_string_descriptors_group = {
> > .attrs = ufs_sysfs_string_descriptors,
> > };
> >
> > +static bool ufshcd_is_wb_flags(enum flag_idn idn)
> Inline?
> And just return (idn >= QUERY_FLAG_IDN_WB_EN && idn <= QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8)
>
> > +{
> > + if (idn >= QUERY_FLAG_IDN_WB_EN &&
> > + idn <= QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8)
> > + return true;
> > + else
> > + return false;
> > +}
> > +
>
>
> >
> > +int ufshcd_wb_get_flag_index(struct ufs_hba *hba)
> > +{
> > + if (hba->dev_info.b_wb_buffer_type ==
> > WB_BUF_MODE_LU_DEDICATED)
> > + return hba->dev_info.wb_dedicated_lu;
> > + else
> No need for else.
> Maybe make this static inline in ufshcd.h?
>
> > + return 0;
> > +}
> > +

\
 
 \ /
  Last update: 2020-05-03 08:07    [W:3.062 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site