lkml.org 
[lkml]   [2020]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN
Hi Guenter,

Thanks for the initial look at this.

One question for you below...

On Fri, May 29, 2020 at 10:30:16AM -0700, Guenter Roeck wrote:
> On 5/29/20 5:46 AM, Manikandan Elumalai wrote:
> > + /* Enable TEMP1 by default */
> > + config |= ADM1278_TEMP1_EN;
> > + ret = i2c_smbus_write_byte_data(client,
> > + ADM1275_PMON_CONFIG,
> > + config);
> > + if (ret < 0) {
> > + dev_err(&client->dev,
> > + "Failed to enable temperature config\n");
> > + return -ENODEV;
> > + }
>
> This can be handled in a single operation, together with ADM1278_VOUT_EN
> below. There is no need for two separate write operations.

I don't know if you noticed here but the change ends up enabling
TEMP1_EN in all cases. Is this acceptable? If not, do you have any
preference on how it is selected for enablement?

> > /* Enable VOUT if not enabled (it is disabled by default) */
> > if (!(config & ADM1278_VOUT_EN)) {
> > @@ -681,9 +697,6 @@ static int adm1275_probe(struct i2c_client *client,
> > }
> > }
> >
> > - if (config & ADM1278_TEMP1_EN)
> > - info->func[0] |=
> > - PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> > if (config & ADM1278_VIN_EN)
> > info->func[0] |= PMBUS_HAVE_VIN;
> > break;
> >
>

--
Patrick Williams
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-05-29 19:43    [W:0.143 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site