lkml.org 
[lkml]   [2020]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dt-bindings: input: touchscreen: edt-ft5x06: change reg property
On Wed, 20 May 2020 09:33:27 +0200, Johan Jonker wrote:
> A test with the command below gives this error:
>
> arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml:
> touchscreen@3e: reg:0:0: 56 was expected
>
> The touchscreen chip on 'rk3188-bqedison2qc' and other BQ models
> was shipped with different addresses then the binding currently allows.
> Change the reg property that any address will pass.
>
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/touchscreen/
> edt-ft5x06.yaml
>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>

Applied, thanks!

\
 
 \ /
  Last update: 2020-05-29 19:08    [W:0.056 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site