lkml.org 
[lkml]   [2020]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: linux-rt stall on imx6dl on patch-5.4.22-rt13.patch
Hi

On Fri, May 29, 2020 at 3:31 PM Sebastian Andrzej Siewior
<bigeasy@linutronix.de> wrote:
>
> On 2020-05-29 10:08:01 [+0200], Michael Nazzareno Trimarchi wrote:
> > Hi all
> Hi,
>
> > I get this stack trace
> > echo 3 > /proc/sys/vm/drop_caches chrt -f 99 sysbench --test=cpu --num-threads=2
> >
> > First of all, I need to know that if it is a valid use case because
> > was raised by the testing team and
> > how can I start and where to take a look at it
>
> Assuming that there is a `;' in front of `chrt' then I wouldn't be
> surprised. You are basically keeping two CPUs busy with sysbench at RT
> priority and then wondering why the system isn't making any progress. If
> it wouldn't be for the RT throttler, you might not even see any output
> and box hardware would appear be dead.

No, I'm not surprised but my answer to them was not enough. Right now
they are executing some bench.

Best
Michael
>
> > Best Regards
> > Michael
> >
> > [ 161.709260] 001: sh (480): drop_caches: 3
> > [ 180.234358] 001: sched: RT throttling activated
> > [ 180.283363] 001: fec 2188000.ethernet eth0: MDIO read timeout
> > [ 180.283406] 001: ------------[ cut here ]------------
> > [ 180.283416] 001: WARNING: CPU: 1 PID: 133 at
> > drivers/net/phy/phy.c:716 phy_er
> >
> > ror+0x24/0x64
> > [ 180.283460] 001: Modules linked in:
> > [ 180.283473] 001: CPU: 1 PID: 133 Comm: kworker/1:2 Tainted: G
> > W
>
> This is hard to read. Especially later in that mail. In future please
> try to not cut the lines.
>
> Sebastian



--
| Michael Nazzareno Trimarchi Amarula Solutions BV |
| COO - Founder Cruquiuskade 47 |
| +31(0)851119172 Amsterdam 1018 AM NL |
| [`as] http://www.amarulasolutions.com |

\
 
 \ /
  Last update: 2020-05-29 15:49    [W:0.120 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site