lkml.org 
[lkml]   [2020]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/5] scsi: ufs-mediatek: Fix imprecise waiting time for ref-clk control
Date
Currently ref-clk control timeout is implemented by Jiffies. However
jiffies is not accurate enough thus "false timeout" may happen.

Use more accurate delay mechanism instead, for example, ktime.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Andy Teng <andy.teng@mediatek.com>
---
drivers/scsi/ufs/ufs-mediatek.c | 7 ++++---
drivers/scsi/ufs/ufs-mediatek.h | 2 +-
2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index d56ce8d97d4e..523ee5573921 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -120,7 +120,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
{
struct ufs_mtk_host *host = ufshcd_get_variant(hba);
struct arm_smccc_res res;
- unsigned long timeout;
+ ktime_t timeout, time_checked;
u32 value;

if (host->ref_clk_enabled == on)
@@ -135,8 +135,9 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
}

/* Wait for ack */
- timeout = jiffies + msecs_to_jiffies(REFCLK_REQ_TIMEOUT_MS);
+ timeout = ktime_add_us(ktime_get(), REFCLK_REQ_TIMEOUT_US);
do {
+ time_checked = ktime_get();
value = ufshcd_readl(hba, REG_UFS_REFCLK_CTRL);

/* Wait until ack bit equals to req bit */
@@ -144,7 +145,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
goto out;

usleep_range(100, 200);
- } while (time_before(jiffies, timeout));
+ } while (ktime_before(time_checked, timeout));

dev_err(hba->dev, "missing ack of refclk req, reg: 0x%x\n", value);

diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/scsi/ufs/ufs-mediatek.h
index 5bbd3e9cbae2..fc42dcbfd800 100644
--- a/drivers/scsi/ufs/ufs-mediatek.h
+++ b/drivers/scsi/ufs/ufs-mediatek.h
@@ -28,7 +28,7 @@
#define REFCLK_REQUEST BIT(0)
#define REFCLK_ACK BIT(1)

-#define REFCLK_REQ_TIMEOUT_MS 3
+#define REFCLK_REQ_TIMEOUT_US 3000

/*
* Vendor specific pre-defined parameters
--
2.18.0
\
 
 \ /
  Last update: 2020-05-29 11:24    [W:0.059 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site