lkml.org 
[lkml]   [2020]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 03/16] spi: dw: Locally wait for the DMA transactions completion
On Fri, May 29, 2020 at 7:02 AM Serge Semin
<Sergey.Semin@baikalelectronics.ru> wrote:
>
> Even if DMA transactions are finished it doesn't mean that the SPI
> transfers are also completed. It's specifically concerns the Tx-only
> SPI transfers, since there might be data left in the SPI Tx FIFO after
> the DMA engine notifies that the Tx DMA procedure is done. In order to
> completely fix the problem first the driver has to wait for the DMA
> transaction completion, then for the corresponding SPI operations to be
> finished. In this commit we implement the former part of the solution.
>
> Note we can't just move the SPI operations wait procedure to the DMA
> completion callbacks, since these callbacks might be executed in the
> tasklet context (and they will be in case of the DW DMA). In case of
> slow SPI bus it can cause significant system performance drop.

I read commit message, I read the code. What's going on here since you
repeated xfer_completion (and its wait routine) from SPI core and I'm
wondering what happened to it? Why we are not calling
spi_finalize_current_transfer()?

...

> dws->master->cur_msg->status = -EIO;
> - spi_finalize_current_transfer(dws->master);
> + complete(&dws->dma_completion);
> return IRQ_HANDLED;

...

> +static int dw_spi_dma_wait(struct dw_spi *dws, struct spi_transfer *xfer)
> +{
> + unsigned long long ms;
> +
> + ms = xfer->len * MSEC_PER_SEC * BITS_PER_BYTE;
> + do_div(ms, xfer->effective_speed_hz);
> + ms += ms + 200;
> +
> + if (ms > UINT_MAX)
> + ms = UINT_MAX;
> +
> + ms = wait_for_completion_timeout(&dws->dma_completion,
> + msecs_to_jiffies(ms));
> +
> + if (ms == 0) {
> + dev_err(&dws->master->cur_msg->spi->dev,
> + "DMA transaction timed out\n");
> + return -ETIMEDOUT;
> + }
> +
> + return 0;
> +}
> +
> /*
> * dws->dma_chan_busy is set before the dma transfer starts, callback for tx
> * channel will clear a corresponding bit.
> @@ -155,7 +184,7 @@ static void dw_spi_dma_tx_done(void *arg)
> return;
>
> dw_writel(dws, DW_SPI_DMACR, 0);
> - spi_finalize_current_transfer(dws->master);
> + complete(&dws->dma_completion);
> }
>
> static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
> @@ -204,7 +233,7 @@ static void dw_spi_dma_rx_done(void *arg)
> return;
>
> dw_writel(dws, DW_SPI_DMACR, 0);
> - spi_finalize_current_transfer(dws->master);
> + complete(&dws->dma_completion);
> }


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2020-05-29 09:58    [W:0.156 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site