lkml.org 
[lkml]   [2020]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/9] dt-bindings: atmel-tcb: convert bindings to json-schema
Date
Convert Atmel Timer Counter Blocks bindings to DT schema format using
json-schema.

Also move it out of mfd as it is not and has never been related to mfd.

Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
Changes in v4:
- use oneOf to describe possible clock-names list

.../devicetree/bindings/mfd/atmel-tcb.txt | 56 --------
.../soc/microchip/atmel,at91rm9200-tcb.yaml | 131 ++++++++++++++++++
2 files changed, 131 insertions(+), 56 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-tcb.txt
create mode 100644 Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml

diff --git a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt
deleted file mode 100644
index c4a83e364cb6..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Device tree bindings for Atmel Timer Counter Blocks
-- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon".
- <chip> can be "at91rm9200" or "at91sam9x5"
-- reg: Should contain registers location and length
-- #address-cells: has to be 1
-- #size-cells: has to be 0
-- interrupts: Should contain all interrupts for the TC block
- Note that you can specify several interrupt cells if the TC
- block has one interrupt per channel.
-- clock-names: tuple listing input clock names.
- Required elements: "t0_clk", "slow_clk"
- Optional elements: "t1_clk", "t2_clk"
-- clocks: phandles to input clocks.
-
-The TCB can expose multiple subdevices:
- * a timer
- - compatible: Should be "atmel,tcb-timer"
- - reg: Should contain the TCB channels to be used. If the
- counter width is 16 bits (at91rm9200-tcb), two consecutive
- channels are needed. Else, only one channel will be used.
-
-Examples:
-
-One interrupt per TC block:
- tcb0: timer@fff7c000 {
- compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xfff7c000 0x100>;
- interrupts = <18 4>;
- clocks = <&tcb0_clk>, <&clk32k>;
- clock-names = "t0_clk", "slow_clk";
-
- timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>, <1>;
- };
-
- timer@2 {
- compatible = "atmel,tcb-timer";
- reg = <2>;
- };
- };
-
-One interrupt per TC channel in a TC block:
- tcb1: timer@fffdc000 {
- compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xfffdc000 0x100>;
- interrupts = <26 4>, <27 4>, <28 4>;
- clocks = <&tcb1_clk>, <&clk32k>;
- clock-names = "t0_clk", "slow_clk";
- };
-
-
diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
new file mode 100644
index 000000000000..9d680e0b9109
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Atmel Timer Counter Block
+
+maintainers:
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+ The Atmel (now Microchip) SoCs have timers named Timer Counter Block. Each
+ timer has three channels with two counters each.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - atmel,at91rm9200-tcb
+ - atmel,at91sam9x5-tcb
+ - const: simple-mfd
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ List of interrupts. One interrupt per TCB channel if available or one
+ interrupt for the TC block
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ description:
+ List of clock names. Always includes t0_clk and slow clk. Also includes
+ t1_clk and t2_clk if a clock per channel is available.
+ oneOf:
+ - items:
+ - const: t0_clk
+ - const: slow_clk
+ - items:
+ - const: t0_clk
+ - const: t1_clk
+ - const: t2_clk
+ - const: slow_clk
+ minItems: 2
+ maxItems: 4
+
+ clocks:
+ minItems: 2
+ maxItems: 4
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^timer@[0-2]$":
+ description: The timer block channels that are used as timers.
+ type: object
+ properties:
+ compatible:
+ const: atmel,tcb-timer
+ reg:
+ description:
+ List of channels to use for this particular timer.
+ minItems: 1
+ maxItems: 3
+
+ required:
+ - compatible
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ /* One interrupt per TC block: */
+ tcb0: timer@fff7c000 {
+ compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfff7c000 0x100>;
+ interrupts = <18 4>;
+ clocks = <&tcb0_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+
+ timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-timer";
+ reg = <2>;
+ };
+ };
+
+ /* One interrupt per TC channel in a TC block: */
+ tcb1: timer@fffdc000 {
+ compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfffdc000 0x100>;
+ interrupts = <26 4>, <27 4>, <28 4>;
+ clocks = <&tcb1_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+
+ timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+ };
--
2.26.2
\
 
 \ /
  Last update: 2020-05-30 01:29    [W:0.065 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site