lkml.org 
[lkml]   [2020]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] dt-bindings: chrome: Add cros-ec-typec mux props
On Tue, May 12, 2020 at 7:42 AM Heikki Krogerus
<heikki.krogerus@linux.intel.com> wrote:
>
> Hi guys,
>
> On Mon, May 11, 2020 at 01:46:35PM -0700, Prashant Malani wrote:
> > Hi Rob,
> >
> > Thank you for reviewing the patch. Kindly see my comments inline:
> >
> > On Mon, May 11, 2020 at 02:28:00PM -0500, Rob Herring wrote:
> > > On Wed, Apr 22, 2020 at 03:22:39PM -0700, Prashant Malani wrote:
> > > > Add properties for mode, orientation and USB data role switches for
> > > > Type C connectors. When available, these will allow the Type C connector
> > > > class port driver to configure the various switches according to USB PD
> > > > information (like orientation, alt mode etc.) provided by the Chrome OS
> > > > EC controller.
> > > >
> > > > Signed-off-by: Prashant Malani <pmalani@chromium.org>
> > > > ---
> > > > .../bindings/chrome/google,cros-ec-typec.yaml | 27 ++++++++++++++++++-
> > > > 1 file changed, 26 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
> > > > index 6d7396ab8bee..b5814640aa32 100644
> > > > --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
> > > > +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
> > > > @@ -21,7 +21,21 @@ properties:
> > > > const: google,cros-ec-typec
> > > >
> > > > connector:
> > > > - $ref: /schemas/connector/usb-connector.yaml#
> > > > + allOf:
> > > > + - $ref: /schemas/connector/usb-connector.yaml#
> > > > + - type: object
> > > > + properties:
> > >
> > > These don't seem CrOS EC specific, so why document them as such.
> >
> > Are you referring to the "mode-switch", "orientation-switch" and
> > "usb-role-switch" properties? If so, then yes, they aren't Cros EC
> > specific. The Type C connector class framework requires the nodes to be
> > named like this, and the cros-ec-typec driver uses this framework, hence
> > the description here (the Type C connector class framework doesn't have
> > any bindings).
> >
> > Would it be better to add in the description string that Type Connector
> > class expects these switches to be named this way? :
> >
> > " Reference to a DT node for the USB Type C Multiplexer controlling the
> > data lines routing for this connector. This switch is assumed registered
> > with the Type C connector class framework, which requires it to be named
> > this way."
> > >
> > > > + mode-switch:
> > > > + description: Reference to a DT node for the USB Type C Multiplexer
> > > > + controlling the data lines routing for this connector.
> > >
> > > This is for alternate mode muxing I presume.
> >
> > Yes, that's right.
> > >
> > > We already have a mux-control binding. Why not use that here?
> >
> > Heikki might be able to offer more insight into why this is the case,
> > since the connector class framework seems to expect a phandle and for
> > the device driver to implement a "set" command. Heikki, would you happen to know?
>
> The mode-switch here would actually represent the "consumer" part in
> the mux-control bindings. So the mux-controls would describe the
> relationship between the "mode-switch" and the mux controller(s),
> while the mode-switch property describes the relationship between
> something like USB Type-C Port Manager (or this cros_ec function) and
> the "mux consumer".

The "USB Type-C Port Manager" is not just the parent node in your case?

Can you point me to what you expect your DT to look like showing the
mode switch node, the connector, the USB host(s), and the DP/HDMI
bridge/output?

Rob

\
 
 \ /
  Last update: 2020-05-29 23:56    [W:1.162 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site