lkml.org 
[lkml]   [2020]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] power: supply: max17040: Set rcomp value
From
Date
Hi Sebastian,

I'm sorry, I messed up my rebase on top of the low battery alert and it somehow
slipped through my pre-submit checklist.

Before resubmitting, do you want the rcomp changed in any manner (where the
datasheet doesn't specify if its the full 16 bits or only 8 bites for max17040
but does for the later max17043/max77836 where its only 8 bits)?

Thanks and sorry for the issues,
Jonathan

On 2020-05-28 10:02 a.m., Sebastian Reichel wrote:
> Hi,
>
> This patch does not even compile, how did you test it?
>
> -- Sebastian
>
> On Mon, May 04, 2020 at 03:13:00PM -0700, Jonathan Bakker wrote:
>> According to the datasheet (1), the rcomp parameter can
>> vary based on the typical operating temperature and the
>> battery chemistry. If provided, make sure we set it after
>> we reset the chip on boot.
>>
>> 1) https://datasheets.maximintegrated.com/en/ds/MAX17040-MAX17041.pdf
>>
>> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
>> ---
>> drivers/power/supply/max17040_battery.c | 33 +++++++++++++++++++++----
>> 1 file changed, 28 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/power/supply/max17040_battery.c b/drivers/power/supply/max17040_battery.c
>> index 48aa44665e2f..f66e2fdc0a8a 100644
>> --- a/drivers/power/supply/max17040_battery.c
>> +++ b/drivers/power/supply/max17040_battery.c
>> @@ -10,6 +10,7 @@
>> #include <linux/init.h>
>> #include <linux/platform_device.h>
>> #include <linux/mutex.h>
>> +#include <linux/property.h>
>> #include <linux/err.h>
>> #include <linux/i2c.h>
>> #include <linux/delay.h>
>> @@ -31,6 +32,8 @@
>>
>> #define MAX17040_ATHD_MASK 0xFFC0
>> #define MAX17040_ATHD_DEFAULT_POWER_UP 4
>> +#define MAX17040_RCOMP_MASK 0xFF
>> +#define MAX17040_RCOMP_DEFAULT_POWER_UP 0x97
>>
>> struct max17040_chip {
>> struct i2c_client *client;
>> @@ -48,6 +51,8 @@ struct max17040_chip {
>> int status;
>> /* Low alert threshold from 32% to 1% of the State of Charge */
>> u32 low_soc_alert;
>> + /* Optimization for specific chemistries */
>> + u8 rcomp_value;
>> };
>>
>> static int max17040_get_property(struct power_supply *psy,
>> @@ -119,6 +124,20 @@ static int max17040_set_low_soc_alert(struct i2c_client *client, u32 level)
>> return ret;
>> }
>>
>> +static int max17040_set_rcomp(struct i2c_client *client, u32 val)
>> +{
>> + int ret;
>> + u16 data;
>> +
>> + data = max17040_read_reg(client, MAX17040_RCOMP);
>> + /* clear the rcomp val and set MSb 8 bits */
>> + data &= MAX17040_RCOMP_MASK;
>> + data |= val << 8;
>> + ret = max17040_write_reg(client, MAX17040_RCOMP, data);
>> +
>> + return ret;
>> +}
>> +
>> static void max17040_get_vcell(struct i2c_client *client)
>> {
>> struct max17040_chip *chip = i2c_get_clientdata(client);
>> @@ -190,8 +209,14 @@ static int max17040_get_of_data(struct max17040_chip *chip)
>> "maxim,alert-low-soc-level",
>> &chip->low_soc_alert);
>>
>> - if (chip->low_soc_alert <= 0 || chip->low_soc_alert >= 33)
>> + if (chip->low_soc_alert <= 0 || chip->low_soc_alert >= 33) {
>> + dev_err(&client->dev,
>> + "failed: low SOC alert OF data out of bounds\n");
>> return -EINVAL;
>> + }
>> +
>> + chip->rcomp_value = MAX17040_RCOMP_DEFAULT_POWER_UP;
>> + device_property_read_u8(dev, "maxim,rcomp-value", &chip->rcomp_value);
>>
>> return 0;
>> }
>> @@ -289,11 +314,8 @@ static int max17040_probe(struct i2c_client *client,
>> chip->client = client;
>> chip->pdata = client->dev.platform_data;
>> ret = max17040_get_of_data(chip);
>> - if (ret) {
>> - dev_err(&client->dev,
>> - "failed: low SOC alert OF data out of bounds\n");
>> + if (ret)
>> return ret;
>> - }
>>
>> i2c_set_clientdata(client, chip);
>> psy_cfg.drv_data = chip;
>> @@ -307,6 +329,7 @@ static int max17040_probe(struct i2c_client *client,
>>
>> max17040_reset(client);
>> max17040_get_version(client);
>> + max17040_set_rcomp(client, chip->rcomp_value);
>>
>> /* check interrupt */
>> if (client->irq && of_device_is_compatible(client->dev.of_node,
>> --
>> 2.20.1

\
 
 \ /
  Last update: 2020-05-29 22:10    [W:0.086 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site