Messages in this thread | | | Subject | Re: [PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts | From | Jonathan Marek <> | Date | Thu, 28 May 2020 23:15:09 -0400 |
| |
On 5/28/20 11:05 PM, Bjorn Andersson wrote: > On Sat 23 May 19:38 PDT 2020, Jonathan Marek wrote: > >> Add dts nodes for apps_smmu and USB for both sm8150 and sm8250. >> >> Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a >> few changes. Notably, the HDK865 dts has regulator config changed a bit based >> on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150). > > Can you please elaborate on this discrepancy? I do remember seeing > something odd when looking at this, but it seems like I didn't document > it anywhere... > > Thanks, > Bjorn >
Mainly there's a few regulators with different min/max voltage values. For example with l16a, downstream has min/max 3024000/3304000 but upstream sm8250-mtp has 2704000/2960000. I also added l18a.
>> >> Jonathan Marek (6): >> arm64: dts: qcom: sm8150: add apps_smmu node >> arm64: dts: qcom: sm8250: add apps_smmu node >> arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes >> arm64: dts: qcom: sm8250: Add USB and PHY device nodes >> arm64: dts: qcom: add sm8150 hdk dts >> arm64: dts: qcom: add sm8250 hdk dts >> >> arch/arm64/boot/dts/qcom/Makefile | 2 + >> arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++ >> arch/arm64/boot/dts/qcom/sm8150.dtsi | 180 +++++++++ >> arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++ >> arch/arm64/boot/dts/qcom/sm8250.dtsi | 287 +++++++++++++++ >> 5 files changed, 1384 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts >> create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts >> >> -- >> 2.26.1 >>
| |