lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts
On Sat 23 May 19:38 PDT 2020, Jonathan Marek wrote:

> Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
>
> Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
> few changes. Notably, the HDK865 dts has regulator config changed a bit based
> on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).

Can you please elaborate on this discrepancy? I do remember seeing
something odd when looking at this, but it seems like I didn't document
it anywhere...

Thanks,
Bjorn

>
> Jonathan Marek (6):
> arm64: dts: qcom: sm8150: add apps_smmu node
> arm64: dts: qcom: sm8250: add apps_smmu node
> arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
> arm64: dts: qcom: sm8250: Add USB and PHY device nodes
> arm64: dts: qcom: add sm8150 hdk dts
> arm64: dts: qcom: add sm8250 hdk dts
>
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 180 +++++++++
> arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 287 +++++++++++++++
> 5 files changed, 1384 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts
>
> --
> 2.26.1
>

\
 
 \ /
  Last update: 2020-05-29 05:07    [W:0.483 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site