lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net] net: mvpp2: Enable autoneg bypass for 1000BaseX/2500BaseX ports
On Thu, May 28, 2020 at 08:43:12PM +0200, Thomas Bogendoerfer wrote:
> On Thu, 28 May 2020 15:48:05 +0100
> Russell King - ARM Linux admin <linux@armlinux.org.uk> wrote:
>
> > On Thu, May 28, 2020 at 04:33:35PM +0200, Thomas Bogendoerfer wrote:
> > > below is the dts part for the two network interfaces. The switch to
> > > the outside has two ports, which correlate to the two internal ports.
> > > And the switch propagates the link state of the external ports to
> > > the internal ports.
> >
> > Okay, so this DTS hasn't been reviewed...
>
> that's from our partner, I'm just using it. Stripping it down isn't
> the point for my now.
>
> > This isn't correct - you are requesting that in-band status is used
> > (i.o.w. the in-band control word, see commit 4cba5c210365), but your
> > bug report wants to enable AN bypass because there is no in-band
> > control word. This seems to be rather contradictory.
> >
> > May I suggest you use a fixed-link here, which will not have any
>
> afaik fixed-link will always be up, and we want to have the link state
> from the switch external ports.
>
> > inband status, as there is no in-band control word being sent by
> > the switch? That is also the conventional way of handling switch
> > links.
>
> again, we want to propagte the external link state inside to all
> the internal nodes. So this will not work anymore with fixed-link.

Can you explain this please? Just as we think we understand what's
going on here, you throw in a new comment that makes us confused.

You said previously that the mvpp2 was connected to a switch, which
makes us think that you've got some DSA-like setup going on here.
Does your switch drop its serdes link when all the external links
(presumably the 10G SFP+ cages) fail?

Both Andrew and myself wish to have a complete picture before we
move forward with this.

Thanks.

--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC for 0.8m (est. 1762m) line in suburbia: sync at 13.1Mbps down 424kbps up

\
 
 \ /
  Last update: 2020-05-29 00:05    [W:0.142 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site