lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 6/6] dt-bindings: interrupt-controller: Add Loongson PCH MSI
Date
Add binding for Loongson PCH MSI controller.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
--
v5: Add range check for msi-base-vec & msi-num-vecs
---
.../loongson,pch-msi.yaml | 62 +++++++++++++++++++
1 file changed, 62 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
new file mode 100644
index 000000000000..1a5ebbdd219a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/loongson,pch-msi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson PCH MSI Controller
+
+maintainers:
+ - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description:
+ This interrupt controller is found in the Loongson LS7A family of PCH for
+ transforming interrupts from PCIe MSI into HyperTransport vectorized
+ interrupts.
+
+properties:
+ compatible:
+ const: loongson,pch-msi-1.0
+
+ reg:
+ maxItems: 1
+
+ loongson,msi-base-vec:
+ description:
+ u32 value of the base of parent HyperTransport vector allocated
+ to PCH MSI.
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 255
+
+ loongson,msi-num-vecs:
+ description:
+ u32 value of the number of parent HyperTransport vectors allocated
+ to PCH MSI.
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 1
+ maximum: 256
+
+ msi-controller: true
+
+required:
+ - compatible
+ - reg
+ - msi-controller
+ - loongson,msi-base-vec
+ - loongson,msi-num-vecs
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ msi: msi-controller@2ff00000 {
+ compatible = "loongson,pch-msi-1.0";
+ reg = <0x2ff00000 0x4>;
+ msi-controller;
+ loongson,msi-base-vec = <64>;
+ loongson,msi-num-vecs = <64>;
+ interrupt-parent = <&htvec>;
+ };
+...
--
2.27.0.rc0
\
 
 \ /
  Last update: 2020-05-28 17:29    [W:0.088 / U:1.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site